Product Information
| Manufacturer: Porter Cable |
| Product Number: 5140075-35 |
| Classification: Part |
| Weight: 0.80 lbs. |
| Shipping: Ships Worldwide |
Description:
| This is an original Porter Cable replacement part for the PCB330BS 14" band saw. The miter gauge assembly is a complete part, and no assembly is required. The miter gauge fits into the slot on the table, and no tools are required to install the part, the miter gauge assembly is sold individually. |
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Band Saw
- • Saw
Questions & Answers
Is the bar width 5/8 or 3/4"
Kyle
asked on 2018-11-26
Hi Kyle, thank you for your question. Yes, this bar looks to be approximately 5/8". I hope that helps. Good luck with your repair.
is it a t bar or standard ?
rudy
asked on 2018-10-19
Hello Rudy, Thank you for the question. This is a Standard Gauge. Hope this helps!
need a mitre guage for this table saw...thanks
Don
for model number skil 3400
asked on 2020-01-08
Hello Don and thank you for writing.
The miter gauge body part number: 2610358910 is in the list of compatible items for your model. The miter assembly has been discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We hope this helps. Please contact us anytime if you require further assistance.
What is the width of the bar?
Tom
asked on 2019-12-16
Hello Tom and thanks for writing.
The bar is about 1 inch wide. We hope this helps. Please contact us anytime.
Inherited my father-in-law's Delta 10" bench saw, model 36-540. It is missing it's miter guage. Will this part fit our saw? Thanks.
Linda Braden
for model number 36-540
asked on 2019-10-25
Hello Linda, thank you for your question. Part Number: 90517470, is the replacement gauge and unfortunately, that part has been discontinued. The gauge part number 5140075-35 is not listed as a compatible replacement. I hope this helps.
What is the width and depth of the bar? I have a 5/8" slot, not 3/4" found on most tables. Please giveBAR measurements
Bob
asked on 2018-11-23
Hello Bob, thank you for your question. This part is approximately 11 inches in length, and 5 inches wide. The height of the part is about 3 1/4 inches from the bottom to the top of the handle. If you could provide the model number of the unit, we would be happy to see if this is a compatible fit with your unit. I hope this helps!
What size is the miter bar on this? width and height? I need it to fit a slot that is 5/8" x 1/4". Thanks
Frank
asked on 2018-10-05
Hello Frank, thank you for your question. This part is approximately 11 inches in length, and 5 inches wide. The height of the part is about 3 1/4 inches from the bottom to the top of the handle. If you could provide the model number of the unit, we would be happy to see if this is a compatible fit with your unit. I hope this helps!
What size is the rail on the 5140075-35 miter gauge?
Willis
asked on 2018-09-18
Hello Willis, Thank you for the question. The rail is approximately 11". Thank you for your inquiry, good luck with this repair!
Can I find it at a retail store? Or online only?
Jorge
asked on 2018-09-18
Hi Jorge, Thank you for the question. Very sorry but we only have information on what we stock here at eReplacementparts.com. We are an online site that sell parts but have one location in Utah with a select stock available. Thank you for your inquiry!
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Lost miter gauge
Ordered a new one and put it in the table
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set
Broken trunnions
Remove table, remove trunnion bracket from table, remove knobs from broken trunnions and other associated parts. Place scale on the new outer most trunnion.place trunnions on, trunnion bracket, place assembly on the table. Install the table on the bandsaw. Insert new pin into split in table, insert the new table insert. Attach the dust collection port. I also needed a miter guage.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Miter gauge missing
Unpacked new part
Installed into machine table slot
Slide back and forth To check clearance
Done
Installed into machine table slot
Slide back and forth To check clearance
Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required
Needed miter guage assembly
Just ordered and started to use right out of the box.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Missing miter gauge on saw I got for FREE
Exact replacement found on this website
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Miter gauge missing
Replaced with new part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required.
Band saw didn't come with a miter gauge. Ordered it through you.
Just slipped right into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Missing mitre guide
Unpackaged and installed it in the miter slot in the table.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Almost Perfect
Great service, great company to deal with. I said ALMOST PERFECT since it was VERY tight. Just took some 600 grit sand paper and lightly sanded it. It is still tight, but slides easily.
Guest -
April 21, 2020
Verified Purchase
Miter Gauge Assy adapted to Roki Table Say
I was able to adapt this to my old Roki Table Saw by turning the slide bar over. It works fine now. Thanks
Guest -
June 9, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
| Manufacturer: Porter Cable |
| Product Number: 5140075-35 |
| Classification: Part |
| Weight: 0.80 lbs. |
| Shipping: Ships Worldwide |
