Miter Gauge Assy 5140075-35
Part Number: 5140075-35
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
Product Information
Description:
This is an original Porter Cable replacement part for the PCB330BS 14" band saw. The miter gauge assembly is a complete part, and no assembly is required. The miter gauge fits into the slot on the table, and no tools are required to install the part, the miter gauge assembly is sold individually. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Band Saw
- • Saw
Questions & Answers for Miter Gauge Assy
Is this miter gauge plastic or metal?
Adam
asked on 2022-02-07
Hello Adam, Thank you for the question. It is made of Metal and Plastic. We hope this helps!
eReplacementParts Team February 07, 2022
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Lost miter gauge
Ordered a new one and put it in the table
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set
Broken trunnions
Remove table, remove trunnion bracket from table, remove knobs from broken trunnions and other associated parts. Place scale on the new outer most trunnion.place trunnions on, trunnion bracket, place assembly on the table. Install the table on the bandsaw. Insert new pin into split in table, insert the new table insert. Attach the dust collection port. I also needed a miter guage.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Metric hex keys, small ball hammer, combination square, tap
Brand new 14" band saw was moderately damaged from from what appeared to be impact damage.
1) disassembled entire machine to inspect/ repair any/ all damaged parts.
2) ordered new wheel tires, table trunnions, door closure stud, table angle scale, and miter gauge.
3) removed oxidation from all existing parts, lubricated all fasteners with anti-sieze, polished & greased all friction parts.
4) honed & waxed table top
5) installed set screw hole & screw to top wheel axle housing.
6) installed new wheel tires.
7) replaced both broken table trunnions
8) installed missing table angle scale.
9) installed missing upper & lower door closure studs & knobs.
10) repaired damaged ( cracked/bent) upper wheel with epoxy metal. Balanced & corrected run-out.
11) painted all rusted surfaces.
12) Ereplacement parts , again, had everything that I needed, including a very handy exploded view of my machine.
2) ordered new wheel tires, table trunnions, door closure stud, table angle scale, and miter gauge.
3) removed oxidation from all existing parts, lubricated all fasteners with anti-sieze, polished & greased all friction parts.
4) honed & waxed table top
5) installed set screw hole & screw to top wheel axle housing.
6) installed new wheel tires.
7) replaced both broken table trunnions
8) installed missing table angle scale.
9) installed missing upper & lower door closure studs & knobs.
10) repaired damaged ( cracked/bent) upper wheel with epoxy metal. Balanced & corrected run-out.
11) painted all rusted surfaces.
12) Ereplacement parts , again, had everything that I needed, including a very handy exploded view of my machine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Miter gauge missing
Unpacked new part
Installed into machine table slot
Slide back and forth To check clearance
Done
Installed into machine table slot
Slide back and forth To check clearance
Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required
Needed miter guage assembly
Just ordered and started to use right out of the box.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Missing miter gauge on saw I got for FREE
Exact replacement found on this website
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Miter gauge missing
Replaced with new part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required.
Band saw didn't come with a miter gauge. Ordered it through you.
Just slipped right into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Missing mitre guide
Unpackaged and installed it in the miter slot in the table.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Excellent quality & unbelievable low price. Ereplacement parts is always my go-to place for parts & diagrams to
Excellent quality, price, availability, and delivery.
Guest -
February 12, 2023
Verified Purchase
Great service as always
I was building two router tables needed 2 miter guages they worked perfectly , great service and quick delivery ,thanks
Guest -
October 18, 2022
Verified Purchase
Almost Perfect
Great service, great company to deal with. I said ALMOST PERFECT since it was VERY tight. Just took some 600 grit sand paper and lightly sanded it. It is still tight, but slides easily.
Guest -
April 21, 2020
Verified Purchase
Miter Gauge Assy adapted to Roki Table Say
I was able to adapt this to my old Roki Table Saw by turning the slide bar over. It works fine now. Thanks
Guest -
June 9, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information