*This part replaces obsolete part #: 70255.
Product Information
Compatibility
This part is compatible with the following machines:
the 16 compatible machines
Repair Guides
Articles:
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers for Manifold Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Adjustable Wrench
Converted from NG to LP
1- Remove knobs
2- Remove two screws, bottom left&right, and lift off manifold cover.
3- Unscrew three gas lines, and unplug wire.
4- Remove two screws that hold manifold
5- Carefully pull manifold out
6- Insert new manifold
7- Start threading gas lines onto manifold, add wire. Go back later and make tight.
8- Screw manifold to grill, now tighten gas lines. Check for leaks.
9- Install manifold cover, and knobs.
2- Remove two screws, bottom left&right, and lift off manifold cover.
3- Unscrew three gas lines, and unplug wire.
4- Remove two screws that hold manifold
5- Carefully pull manifold out
6- Insert new manifold
7- Start threading gas lines onto manifold, add wire. Go back later and make tight.
8- Screw manifold to grill, now tighten gas lines. Check for leaks.
9- Install manifold cover, and knobs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
Articles:
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|