866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Grill Parts  Weber Parts  70306 Main Burner Tube

Main Burner Tube

Part Number: 70306
Weber
Availability: 25+ in stock
Price: $26.22
Quantity:
Ships within 1 business day
Description:
Genuine Manufacturer Approved Stainless steel burner tube used on some Weber Gas Grills. This part is Sold Individually. The burners are the part of the grill that the flame rises from. Depending on your grill you may have 3, 4, 6 or more of these.
Product Information
Manufacturer: Weber
Product Number: 70306
Classification: Part
Weight: 1.34 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Ignitor Button on a Char-Broil Tru-Infrared Gas Grill
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
Related Products
Questions & Answers

what is the length of this burner rod
trish for model number summit 450
Hello Trish, thank you for your inquiry! We found the dimensions of this part to be the following: 20 1/2 x 1 1/2 in I hope this information helps!
Repair Instructions: Submitted by Customers Like You
7 of 7 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Main Burner Tube - 70306
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set
Burners were corroded and the heat was uneven. Instructions to replace the came with the parts and it was pretty simple to replace them once I got the front panel and manifold off.
Removed control knobs and front panel. Removed gas valves from manifold. Pulled old burners out through the space where the valves go. Reversed steps to complete repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Flavorizer Bars - 70375
Main Burner Tube - 70306
Flavorizer Bar Brackets - 64850
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Flavorizer bar and bracket was heavily rusted. Burner tubes worked but weren't performing well due to rust.
Disconnect propane from grill and open all control valves
Removed grill grates and flavorizer bars.
Removed control knobs
Removed two screws to remove control knob panel to access manifold
Removed two screws securing manifold and moved manifold to access burner tubes.
Slid burner tubes out
Removed two screws securing the front and back flavorizer bar brackets and removed brackets
Replaced with new brackets and screws (included)
Inserted new burner tubes
Screw in manifold using old screws
Reconnect propane
Test all burners
Reinstall control knob panel using old screws
Install all control knobs
Install new flavorizer bars
Install existing grill grate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Main Burner Tube - 70306
Wiring Harness - 70881
Battery Pack Head - 70879
Battery Pack Housing - 70880
Sear Burner Tube Kit - 70865
Led Sensor - 70983
Momentary Switch - 70189
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Nutdriver
Weber Summit s-470 grill was getting worn out. It is used a lot and some of the parts were getting old.
Also the LED sensor for the propane tank , and the control knob lights were not working. I ordered multiple Weber parts because I wasn't sure exactly what was wrong. Each part came with its own replacement instructions from Weber. Instructions were great. I had to remove the knobs and the front control panel to replace the burner tubes, wiring harness and LED sensor. It was all pretty easy with the detailed instructions with lots of pictures from Weber. I also replaced the battery pack housing. I spent about $200, but I pretty much have a brand new BBQ. I suspect it will be another 5+ years before I need to do any more work on this BBQ.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Door Magnet - 91357
Main Burner Tube - 70306
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Wrench Set, Adjustable Wrench
Grill would barely reach temperature
Removed the doors and front cover of my Weber Summit Grill. (The means and fashion for doing so can be found on the internet and on youtube. I replaced the 5 of my 8 burner tubes plus the searing station burner, also replaced the light switch which had melted in our Phoenix Az heat and replaced one of the magnet in the doors. Project took about an hour and a half and the grill now works like new. Very please with eReplacementParts.com I received what I ordered in a timely fashion and the instructions included with the material were very good and detailed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Door Magnet - 91357
Handle With Hardware - 70370
Main Burner Tube - 70306
Light Switch - 40264001
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Nutdriver, Adjustable Wrench, Needle nose pliers
Bent handle, burner rusted, door magnets rusted.
Door magnets take some force to remove, make sure you work one side first and then the other. Take a look at the new magnet to see which side comes out first. Handle is a breeze, takes about 2 mins. to replace. Burner is a little more time consuming since your have to disassemble the grill a little.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy