Easy
30-60 minutes
This is a genuine Char-Broil replacement part, it is sold individually.
This is the part of the Grill that the flame is coming from on your Gas Grill.
Depending on your grill you may have 3 or 4 of these.
To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided.
The front of the burner will connect to the Electrode W/ Wire/Collector.
They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled.
Main Burner Tube, No Electrode G431-0300-W2A
OEM part for: Char-Broil
Part Number: G431-0300-W2A
$14.93
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- 14-3/8- inch
- Classification: Part
- Weight: 0.39 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 31 machines
Char-Broil
463460710 Designer Series 4-Burner with Side Burner View Diagrams & Manuals
463420511 4-Burner Grill With Outdoor Stovetop View Diagrams & Manuals
463221311 6-Burner Grill With Side Burner & Sear Burner View Diagrams & Manuals
463230710 Six-Burner Gas Grill with Side Burner View Diagrams & Manuals
463440109 Four-Burner Gas Grill with Side Burner View Diagrams & Manuals
463320110 Three-Burner Gas Grill with Side Burner View Diagrams & Manuals
463230510 Six-Burner Grill with Side Burner & Sear Burner View Diagrams & Manuals
463320107 (2007) Gas Grill View Diagrams & Manuals
463420507 (2007) Gas Grill View Diagrams & Manuals
463420508 Designer Series Gas Grill View Diagrams & Manuals
463460708 Four Burner Designer Series Grill View Diagrams & Manuals
463470109 Three Burner Grill with Side Burner View Diagrams & Manuals
464310208 (2008) Gas Grill View Diagrams & Manuals
464310408 (2008) Gas Grill View Diagrams & Manuals
464310608 (2008) Gas Grill View Diagrams & Manuals
464310808 (2008) Gas Grill View Diagrams & Manuals
464321407 Grill View Diagrams & Manuals
464321507 Grill View Diagrams & Manuals
464321607 Grill View Diagrams & Manuals
464321907 Grill View Diagrams & Manuals
464322107 (2007) Gas Grill View Diagrams & Manuals
466311008 -2008 Gas Grill View Diagrams & Manuals
466311208 -2008 Gas Grill View Diagrams & Manuals
463230511 6 Burner Gas Grill View Diagrams & Manuals
463420708 4 Burner Outdoor Stove and Griddle View Diagrams & Manuals
463234312 Classic C-69G View Diagrams & Manuals
463230514 Classic 6-Burner Gas Grill C-69G5 View Diagrams & Manuals
463334614 Classic 3-Burner Gas Grill with Sideburner View Diagrams & Manuals
463461614 N480 4-Burner Gas Grill with Lidded Sideburner View Diagrams & Manuals
463420509 4-Burner Grill with Stovetop and Sideburner View Diagrams & Manuals
463441311 LP Gas Outdoor BBQ Grill with Side Burner View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Range Parts
- Outdoor Grill Parts
This part replaces obsolete part #: 80009027, G431-0300-W1A, G432-1700-W1, 80012284, 80009947, G431-0300-W2, G431-0300-W1
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exact fit, come with screws
Had to drill old screws out, new ones fit like a glove and work great!
Guest -
April 27, 2021
Verified Purchase
Grill parts
These oem replacement parts for my grill where an exact fit and received on time.I have never been disappointed with this company with parts or service a big thumbs up
Guest -
November 28, 2020
Verified Purchase
Great customer service. Able to get hard to find parts for my grill.
The Burner tubes worked and were delivered in just a couple of days.
Guest -
February 25, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Main Burner Tube, No Electrode
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Burners and carry over tubes were rusted.
Russell - June 21, 2017
👍 10 of 11 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Wrench Set, Wire brush
I used a wire brush to clean up the heads of some of the screwdriver slots on the old rusted parts. Some of the old round-headed bolts with nuts broke when trying to take them out. This was ok because there are more than enough new bolts, nuts, washers, lock washers and screws supplied with the new original replacement parts to do the job even if you drop and lose a few. I used never seize on all the new bolts and screw threads when installing for ease of future parts replacement. I replaced all 5 main burners, 4 carryover tubes, 5 heat tents and one searing burner. All original replacement parts installed easily and fit exactly where they were designed to. I used the old electrodes and had to adjust the distance a little to get a good spark to ignite the gas properly. I ran all the burners wide open for 20 minutes and then let it cool down before cooking on the grill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
All the old parts were rusted out.
Jeff - May 26, 2016
👍 7 of 7 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
All the screws were rust and corroded. I had to drill them out, replaced with stainless steel screws. Simple to change out the burner and carry over tubes then. For the heat tent just remove the old rusted ones and place the new ones in by hand.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burners and heat tents rusted
Donald - September 19, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill
1 Removed the old burner and crossovers. Tried using a drill driver which only stripped the socket. Used vice drips to loosen the screws holding the main burners. Worked well.
2. Removed the entire units.
3. Replaced the main and crossovers with the new screws provided. (Lots of extra screws).
4 Put on new heat shields.
5 Scraped the grills with a painting knife, cleaned them with high pressure cleaner and put them back.
6 Turned it on, first time worked well. Let it burn for 15 minutes.
All done.
2. Removed the entire units.
3. Replaced the main and crossovers with the new screws provided. (Lots of extra screws).
4 Put on new heat shields.
5 Scraped the grills with a painting knife, cleaned them with high pressure cleaner and put them back.
6 Turned it on, first time worked well. Let it burn for 15 minutes.
All done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts we're all rotted out
Ronnie - July 6, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set, Power grinder
Most of the screws were rusted on had to grind new slots and used a flat head screw driver to remove them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts were just rusted out.
Dan - June 4, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Just unscrewed parts and replaced with new pars.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rusted burners
michael - June 2, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill
Pulled out old burners and replaced with little effort
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heat tents and burners were rusting out from excessive use
John - May 12, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Power Drill, Angle Grinder
I took the cooking grates off and took them to the car wash and power washed them. (Quick and easy clean for a dollar). I took out the rusty heat tents and then just like everyone else on here, the screws that hold the burners in place wouldn't come out. The heads twisted off or they just stripped out. Instead of drilling them out, I used an angle grinder with a cut-off wheel to buzz the heads off the screws and then the whole burner assembly came right out. The burners I ordered came with all the necessary screws, washers, and nuts. The only thing I had to mess with was the igniters. I had to drill out the holes for the igniter on the sear burner and reattach it to the new one. My grill looks brand new now and I'm very happy with it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
All parts were correct. Fixed.
Tim - August 14, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Changed the main burner tube and the carryover tubes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner tubes, heat tents, carryover tubes corroded.
Michael - May 12, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Vice grip
Remove the old corroded parts and replaced with the new parts. Hardest to change were the burner tubes because of the screw on each was badly corroded. Used vice grips to clamp on the screw heads and break loose. Then used common screwdriver to remove.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Main burners were rusty and falling apart. Big yellow flame and unsafe. The ignition module didn't work. The heat tents were rusted and burned out.
Ronald - July 18, 2018
Tool Type
Outdoor Grill
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Power Drill
I pulled the knobs off of the front of the flame adjustment valves. I removed the two screws behind each valve. This allowed me to flex the front enough to replace the ignition module. The screws securing the burners were rusted so I drilled them out and replaced them with new screws. Everything else was easy peasy. My six burner grill with side burner works like new. A huge savings over buying a new grill. Ron W.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
