eReplacementParts.com
866-322-9842
Broil-Mate Parts
Repair Parts Home  Grill Parts  Broil-Mate Parts  52904-144 Main Burner

Main Burner

Part Number: 52904-144
Broil-MateHuntingtonSterling
Availability: 25+ in stock
Price: $7.18
Quantity:
Order within the next 3 hours
and your part ships today!
Product Information
Manufacturer: Broil-Mate, Huntington, Sterling
Product Number: 52904-144
Classification: Part
Weight: 0.49 lbs.
Shipping: Ships Worldwide
Description:
This is a Genuine OEM stainless steel burner to be used with Liquid Propane Only. This part is sold Individually. A gas grill's burner is the central source of heat for cooking food. If a burner on your gas grill produces only a low flame or if the burner is obviously damaged then you might need to replace it.
Products Compatibility

This item works with the following types of products:

  • • Outdoor Grill
Questions & Answers

Length and diameter of tube
Mike
Hello Mike, Thank you for the question. This Main Burner is 15 3/4" long x 1" in Diameter. Thank you for your inquiry, good luck with this repair!
Do these burners fit either the broil-mate 7020-64 & 7120-64 gas grills?
John zampella for model number 7020-64 & 7120-64
Hello John, Part number 52904-144 is the compatible part for your model Hope this helps
Do these burners fit broil-mate models 7020-64 & 7120-64?
John Zampella for model number 7020-64 & 7120-64
Hello John part number 52904-144 is the compatible part for your model Hope this helps
I need 3 burners that are cracked which measure 17 1/4 end to end do you have them or something close
Alex for model number 6761-64
Hi Alex, Thank you for your question. The part number listed under your model number for the burner is 18633. I hope this helps. Thank you and have a great day!
Which burner do I need, and how do I replace it?
Jay for model number 6120-64
Hello Jay, Thanks for your question! There are 5 burners on model number 6120-64. These are all the same so, regardless of which one on your model is not working the compatible part number is 52904-144. To replace any of the 5 burners it will be the same procedure. 1. Remove the cooktop grate and flame tamer. 2. Pull the cotter pin out of the back of the burner. 3. Remove the burner mounting screw. 4. Pull the burner back and up to release it from the manifold. We hope this helps! 5. Push the burner into the manifold. 6. Reinstall the burner mounting screw. 7. Reinstall the cotter pin, the flame tamer and the cooktop grate.
Repair Instructions: Submitted by Customers Like You
5 of 5 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Collector Box - Front Lower - 52225-014A
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers
Burner was rusted out
Replaced the burner and the collector box. Also cleaned the grill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Burner tubes we're rusted out
Took out old tubes put new ones in. The lady on the phone was very nice. And made sure I ordered the right ones
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, HAMMER AND CHISEL
Burner rusted out
1. Hardest part was removing old burner tubes that had rusted tight to the back of the grill. Two broke free fairly easy and a third loosened with pressure and WD-40. The remaining two had to be knocked free with a chisel and heavy hammer.
2. Replacement tubes fit perfectly and went in easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Electrode - 10342-E12
Stainless Steel Heat Plate - 18431
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Adjustable Wrench
All 4 burners were burned out & cracked. Both electrodes didn't work so had to light grill with match or lighter. All of the Flav-R-Wave heat.deflectors we're rusted.
1. Removed old burners, Flav-R-Wave & electrodes.
2. Put in new electrodes first, then burners, then layed Flav-R-Waves just under grates on ledge.
3. Pretty simpe. Took about 10 min.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Made new hold down clips out of a paper clip
Old burners had rusted out
Remove old burners, shop vac grill out, slide in new burners
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Cast Iron Cooking Grate - 52007-181
Collector Box - Front Lower - 52226-014
Collector Box - Front Upper - 52216-014
Stainless Steel Heat Plate - 18431
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Wire brush
Burners old and inefficient
Removed grates and heat plates.
Sprayed with penetrant and wire brushed the inside and where burners met on wall of grill housing.
Used pliers to grab burners and gently rock to loosen and lift off of mounting screws in rear.
Once all burners loose I lifted entire assembly out of grill.
Removed stickers from new parts and cleaned to ensure no glue or paper inside holes.
Using old assembly for reference I re assembled new components and installed reverse of removal.
Coated grates with oil and seasoned for about 45 min @ 400* .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, hammer
My old burners were rusted and corroded. Alas, the screws holding them in place were equally rusted and corroded and impossible to unscrew.
I took a hammer and knocked out the old burners. I was able to insert the new burners in their place without screwing them in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Old burners were rusted and cracked.
Removed each of the four main burners and replaced with new. One screw for each burner. Was very simple and easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Stainless Steel Heat Plate - 18431
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers
Burners were rusted out and the heat grates above them
Simple as can be , I pulled out the old ones no tools required cleaned out the grill put in the new parts works like a charm great service great price couldn't ask for more thank you very much much appreciated
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Main Burner - 52904-144
Collector Box - Front Lower - 52225-014A
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Burners were rusted out
Removed old burners and collector box from grill.
Cleaned grill with degreaser.
Replaced burners and collector box.
The screws that hold the burners in were rusted tight, one I had to break out and not use again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.7
Average Rating (out of 5):
7 Reviews
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • worked great!
    The website was very easy to use and the grill burners were delivered quick! Very happy with the product and especially the price, other websites were 3 times as much!
    Guest - 21 days ago Verified Purchase
    gas grill burner
    These were exact replacements. worked great.
    Guest - 28 days ago Verified Purchase
    Perfect fit
    Delivery was quick and burner fit perfect. Works great!!
    Mark - June 15, 2019 Verified Purchase
    My parts
    The parts were the right ones and new. Fast service also. Thank you
    Guest - June 11, 2019 Verified Purchase
    Perfect fit and easy to install!
    Part fit great once you removed the cotter pin that is usually rusted on the old burner. Flame is dispensed evenly and makes your old grill work like when it was new!
    Guest - May 21, 2019 Verified Purchase
    as expected
    arrived in reasonable time
    Guest - May 20, 2019 Verified Purchase
    parts were fine and are working well
    the only problem was I paid $10 extra to have quicker delivery and that did not occur- it took about 5 days rather than 2 to 3 days
    Guest - July 11, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Broil-Mate, Huntington, Sterling
    Product Number: 52904-144
    Classification: Part
    Weight: 0.49 lbs.
    Shipping: Ships Worldwide
    Repair Guides
    Articles:
    How to Replace the Ignitor Button on a Char-Broil Tru-Infrared Gas Grill
    Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
    November 08, 2012
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy