fancyboxy
eReplacementParts.com
866-322-9842
Weber Parts
Repair Parts Home  Grill Parts  Weber Parts  70360 Locking Caster With Insert

Locking Caster With Insert

Part Number: 70360
Weber
Availability: 25+ in stock
Price: $26.22
Quantity:
Ships within 1 business day
Product Information
Manufacturer: Weber
Product Number: 70360
Classification: Part
Weight: 0.65 lbs.
Shipping: Ships Worldwide
Description:
Genuine Manufacturer Sourced locking caster with insert to work with Weber Grills. This is a Plastic part with a Metal Shaft. Caster features the wheel locking mechanism. This caster wheel helps you keep your unit mobile for easy transportation and locking mechanism will keep it steady in place while in operation.
Questions & Answers

how many casters are included?
Chris for model number genesis 320
Hello Chris, thank you for your question. You get one caster when ordering this part number. I hope this helps!
Is this a set of 2 or a is it 26.22 per wheel?
Michael Dakos for model number 70360
Hello Michael , thank you for your question. You get one caster when ordering this part number. I hope this helps!
Can you provide all dimensions?
Dit for model number 70360
Hello Dit, Thank you for the question. Diameter of the caster measures approximately 2-7/8, stem length measures 1-3/8. The insert is approximately 1.25". Thank you for your inquiry, good luck with this repair!
Repair Instructions: Submitted by Customers Like You
6 of 6 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Rubber mallet
Rubber/plastic casters deteriorated.
The instructions say to block up the grill. However being I had everything removed from the grill ( propane tank, grate, tray, etc.) for a thorough cleaning, I just had my wife tilt the grill so that I could have access to the legs so as to replace the casters. With a rubber mallet gently hammered in the plastic inserts and then pushed in the casters by hand pressure.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools were needed for this
Replacing caster wheels on a outdoor Weber gas grill.
The easiest way is to lay your grill on its back, then you can easily access the caster wheels. First disconnect the propane tank and remove it from the grill. Then remove the grilles, dripping pan, and everything that might fall off when you lay it on its back.
Once it's laying down remove the old caster wheels by simply wiggling it while pulling out steady. you don't need any tools. They will slowly but surely come off one by one. Then just push the new caster wheels in until they snap in place. And that's all :).
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Locking Caster With Insert - 70360
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Hammer
Wheels worn and literally falling apart
Removed old casters and replaced them with the new ones.

First one was most difficult. Once I figured best method for removal( tap screwdriver into collar seam with hammer), the other three went quickly. Installing new ones very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Grill is 10 years old and the rubber on the wheels was shot.
Elevated one side of the grill at a time and knocked the old wheels off and replaced them with the new ones.


Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Rubber Mallet
Wheels were broken, tires worn off.
Put one end of the grill on a wooden block between the wheels. Grab the wheel from the underside so the wheel sticks out from the grill and hit it downwards with the rubber mallet to remove the old insert and wheel. Place the new insert in the frame and tap it into place. Insert the wheel and push till it clicks in place. Repeat for all wheels to be replaced.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, rubber malet
Casters would not lock
Remove old insert, install the new insert , then press caster in the insert.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hammer or Mallot to bang out the old wheel inserts.
Wheels and heat deflectors simply wore out after 12 years
1. Removed all movable parts, grills, grease pan, heat deflectors, gas tank, etc. from the grill so that grill could be put on its side, without parts falling our or moving - and to reduce the weight of the grill. Recommend that the top of the grill also be removed to make the grill lighter and easier to tilt the grill over on its side. (Top is easily removed by using pliers to remove to cotter pins and then pull the two pins.)

2. Tilt the grill 90 degrees onto its side so that wheels to be replaced are exposed.

3. Use a hammer/mallot and flat bladed screw driver to (gently) push out the wheel inserts.

4. Push in the new wheel insert and seat the insert with ballot. Then - insert the new
wheels. Lock the wheels so that grill will not roll as it is uprighted.

5. Upright the grill and re-install all moveable parts. 15 minutes total repair time at most.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Light rubber mallet
Plastic locking wheels were wore out from a lot of use.
Lifted one side of grill at time, used blocks of wood. Remove propane tank first. I used large screw driver to work old wheel. Easy to do.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, hammer
Locking Casters disintegrated, due to Florida heat, age, ???
1. Disassemble grill, i.e. remove grates, propane tank etc.
2. Turn grill up its side
3. Removed old caster inserts from grill. Used screwdriver and hammer to loosen old inserts.
4. Inserted new casters
3 Piece of cake
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts worn from use
Systematically took the grill apart, replaced the parts and reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Weber
Product Number: 70360
Classification: Part
Weight: 0.65 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Ignitor Button on a Char-Broil Tru-Infrared Gas Grill
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal