866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Power Tool Parts  Bosch Parts  1617000014 Locking Bolt Set

Locking Bolt Set

Part Number: 1617000014
Bosch
Availability: 7 in stock
Price: $27.36
Quantity:
Ships within 1 business day
Description:
This is a genuine Bosch replacement kit designed for use with rotary demolition hammers. This is an important part of a tool holder assembly which allows users to secure the bit. This locking bolt set includes a metal bolt, spring a washer and a spacer.
Product Information
Manufacturer: Bosch
Product Number: 1617000014
Classification: Part
Weight: 0.21 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Demolition Hammer
  • • Drill
  • • Hammer Drill
  • • Rotary Hammer
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Demolition Hammer
Parts Used:
Locking Bolt Set - 1617000014
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hammer
Bit locking pin broke.
1. Removed the old one.
2. Put the new one in place.
3. Tapped the collar onto the pin.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Parts Used:
Locking Bolt Set - 1617000014
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Vise
Locking bolt was missing
I assembled the parts, then pressed it together by using my vise.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Locking Bolt Set - ( 1617000014 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Discussion For Locking Bolt Set

glynka

Discussion for Locking Bolt Set
Question: Bosch Locking Bolt Set - How To...

JR_Mew

I have a Bosch 11305 demolition hammer, and recently the locking bolt has become hard to turn. It does not appear to spring out enough to spin freely. I am thinking some debris got into it. Does anyone know how to remove and replace this part?
Part Number: 1617000014
Hi JR_Mew,
Most likely what has happened is that a worn bit has caused burs on the pin.This would explain it not turning oe retracting all the way link removed a light and look down the nose to see if this is the case.If it is you can some times remove the spring and retainer allowing the pin to be driven out of the nose and replaced or cleaned up enough to work again.Hope this helps.Good luck.
Tinker
Thanks, Tinker. I was thinking of just replacing it, but I can't figure out how the retainer and spring are removed. Any ideas?

JR
I guess no one knows. I've tried turning the inner retainer, but I can't get a good hold on it. Guess I'll wait until the new parts get here and see if that gives me a clue.
Hi,get a center-punch,& hit with a hammer in the center of the bolt (the side of the bolt that you see with 2 rings) & the bolt will jump out,don't worry; the spring & washers will stay in the center-punch;good luck.(the bolt is installed by pressure to the center ring or washer)
You can use a Bench Vise or a C-Clamp to mount the new Locking Bolt Set back.(Part # 1617000014)
Question: [1617000014] Bosch Locking Bolt ...

pissythecat

Rather then have to buy the complete set why can't I buy just the spring
WJA
Hello pissythecat,

My guess is. That the manufacture figures when one of the parts in that assembly wears out, it is time to replace the complete assembly.

-WJA
Question: Bosch 11305 Jackhammer Bit Over ...

pissythecat

Could a worn locking bolt cause the bit to get stuck so there is little to no hammer effect ?
More on the loss of hammer effect. When the bit gets stuck, if I use a hammer to beat the bit back into the jackhammer the hammer effect works for 20 seconds and then the bit gets stuck again.
WJA
Hello pissythecat,

The locking assembly, if worn could be the cause of the problem you are having, that would be the least expensive fix. You might want to inspect the bit to make sure it is not worn where it fits into tool holder. Also check the tool holder for wear.

WJA
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy