Easy
Less than 15 minutes
This is a Genuine replacement part designed for Dremel Rotary Tool. It helps to lock the the Spindle Shaft. It is Made out of Metal and it is Sold Individually. This Assembly includes a Collar and a Pin.
To complete the repair you would need a Hex Key/Allen Wrench.
Lock 2610009839
OEM part for: Dremel, Bosch, Craftsman
Part Number: 2610009839
$3.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 9 machines
Dremel
300 (F013030000) Corded Multi-Tool View Diagrams & Manuals
780 (F013780000) Cordless Multi-Tool View Diagrams & Manuals
3000 VS Rotary Tool View Diagrams & Manuals
800 Cordless Rotary Tool View Diagrams & Manuals
380-6 High Speed Rotary Tool View Diagrams & Manuals
8000 (F013800002) 10.8v Cordless Rotary Tool Kit View Diagrams & Manuals
300 (F013030005) Series Bare Tool 300 View Diagrams & Manuals
3000 (F013300000) Series Bare Tool 120v Usa 3000 View Diagrams & Manuals
Craftsman
57261139 View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Multi-Tool Parts
This part replaces obsolete part #: 2610913818
Repair Videos ?
Watch the Repair Video for
Lock
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
34
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
best price on parts
parts worked great ,fast shipping
Guest -
October 12, 2022
Verified Purchase
convenient
perfect fit and priced well
Guest -
October 3, 2022
Verified Purchase
Part worked as expected
Correct part and fast turn around time to obtain part
mdterapin -
July 12, 2022
Verified Purchase
Good new parts
I also ordered a motor assembly for the cordless Dremel, Part 2610919750. That with the lock and it works like new again.
Good price, good service. Mailing to Japan took time, but it got here a little earlier than they had said it would. So, very happy all around.
iGlobal -
March 18, 2022
Verified Purchase
Dremel Tool lock pin
The parts fit properly and it is now all good.
Guest -
February 23, 2022
Verified Purchase
Easy swap to long time problem
We had a dremel 3000 at work that no one could use because a bit was stuck in there. I was able to get it out, and then figured out that it was a broken lock that was preventing us from getting bits out. It was a simple swap and Eparts was great to use again.
Guest -
February 9, 2022
Verified Purchase
Saved $100
Received my locking pin today and it took me all of 5 minutes to replace. Saving me $100 by fixing rather than buying a new one.
Guest -
January 5, 2022
Verified Purchase
Great Items works what I needed
Worked, what I needed and thank you for your help.
Guest -
August 27, 2021
Verified Purchase
Worked well
My part came quickly, fit exactly and it was an easy repair. Saved me a lot of money!
Guest -
April 3, 2021
Verified Purchase
very easy repair that just about anyone could do.
Part arrived in a timely manor, exact replacement and I recommend Ereplacement Parts.
Guest -
March 12, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Lock
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The lock fail to engage to loosen collar ,so bits could not be changed
joseph - December 2, 2015
👍 18 of 18 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
Parts Used
Unscrew sleeve holding the collar, remove four screws with star bit (don't loose). the tool should open in half. remove and replace the lock pin and sleeve over the hold in the body of the tool. assemble tool and secure with the four screws to hold the body halves of the tool properly. Screw the collar back in place and test.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lock wore down.
john - July 16, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Unscrew the case (Torx 10).
2. Remove the pin and the spring.
3. Replace the lock.
4. Reassemble the case.
2. Remove the pin and the spring.
3. Replace the lock.
4. Reassemble the case.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
On/Off switch stopped working
Scott - July 7, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Opened the Dremel up
2. Removed old on/off switch from motor and disconnected power wires. (write down black/white configuration beforehand. I don't think it matters during reassembly but better safe than sorry!)
3.Snapped new on/off switch into the four ports of the motor.
4. Reattach white and black power cords. They snap into the unit very easily.
5. Closed the unit.
6. I replaced the carbon brushes to, because they were a bit worn out. This is easy but must be done at the very end so the motor sits correctly.
7. Turned it on and enjoyed my Dremel again. This repair saved me about $40-50 dollars from having to buy a new Dremel. I like this place!
2. Removed old on/off switch from motor and disconnected power wires. (write down black/white configuration beforehand. I don't think it matters during reassembly but better safe than sorry!)
3.Snapped new on/off switch into the four ports of the motor.
4. Reattach white and black power cords. They snap into the unit very easily.
5. Closed the unit.
6. I replaced the carbon brushes to, because they were a bit worn out. This is easy but must be done at the very end so the motor sits correctly.
7. Turned it on and enjoyed my Dremel again. This repair saved me about $40-50 dollars from having to buy a new Dremel. I like this place!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Locking pin was worn down, could not change out bit.
Kyle - May 30, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Took out 4-star drive screws. Removed the housing. Replaced the c-ring and lock the pin. Put the housing back together. Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Could not change bits because the shaft lock was broken
Leon - September 11, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed collar off the tool
Removed four screws
Seperated the two halves
Removed old lock and spring
Reveresed the process and put everything back together and the tool works perfectly
Removed four screws
Seperated the two halves
Removed old lock and spring
Reveresed the process and put everything back together and the tool works perfectly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Collet lock on motor shaft worn
David - March 21, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx Driver
Parts Used
Removed the tool body. Removed the motor assembly and replaced it with the new collet lock as well. Reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Locking button was worn out
Richard - January 28, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx bit
Parts Used
Removed the motor brushes, removed the star headed screws holding the two parts of the tool together, separated the two parts to gain access to the worn out button, replaced the worn part with the new part. Put the two halves back together and put the motor brushes back in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Locking button not working
Thomas - November 21, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
MultiTool
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx Bit
Parts Used
1.Took case apart
2. Replaced lock
3. Put case back together
2. Replaced lock
3. Put case back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The lock pin broke on my dremel tool
Robert - July 14, 2022
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Took the cap off the tool and replaced the shaft lock pin and spring.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Shaft lock was worn after 10 years of faithful service.
Dave - March 2, 2019
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, 2mm Torx bit
Parts Used
1. Removed screws from Dremel housing.
2. Removed motor armature from mounting.
3. Removed lock spring and shaft lock.
4. Dropped new shaft lock into place then positioned new lock spring and replace motor armature.
5. Placed housing back in position.
6. Replaced screws.
7. Tested new shaft lock.
8. SUCCESS!
I am a retired Design Engineer and Master Machinist and have always found fixing things very easy.
2. Removed motor armature from mounting.
3. Removed lock spring and shaft lock.
4. Dropped new shaft lock into place then positioned new lock spring and replace motor armature.
5. Placed housing back in position.
6. Replaced screws.
7. Tested new shaft lock.
8. SUCCESS!
I am a retired Design Engineer and Master Machinist and have always found fixing things very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
