Watch The
Repair Video

KIT IGNITION

Part Number: 530071905

2 Reviews

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 530057937 and 530039167.

Product Information

Manufacturer: Poulan, Husqvarna

Product Number: 530071905

Classification: Part

Weight: 0.30 lbs.

Shipping: Ships Worldwide

Description:

This is a genuine OEM sourced replacement part designed for use with Poulan gas powered chainsaws. The ignition module also known as armature-magneto provides the current for the ignition system by producing pulses of high voltage for the spark plugs. It is a high-quality component which is made of durable metal with a rubber insulated wire and a spark plug. Please note this item is sold individually.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Poulan

Husqvarna

2250 (Type 1) (2006-09) Le Chain Saw
260 (Type 1) (2008-03) Chain Saw
260 (Type 2) (2008-03) Chain Saw
260 (Type 3) (2008-03) Chain Saw
P3314 (Type 1) (2008-07) Ws Chain Saw
P3314 (Type 2) (2008-07) Ws Chain Saw

P3314 (Type 1) (2008-07) Wsa Chain Saw
P3314 (Type 2) (2008-07) Wsa Chain Saw
P3416 (Type 1) (2008-07) Chain Saw
P3416 (Type 2) (2008-07) Chain Saw
P3516PR (Type 1) (2008-07) Chain Saw
P3516PR (Type 2) (2008-07) Chain Saw

See more of the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Chain Saw
• Saw

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

5 of 8 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

KIT IGNITION - 530071905

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Chainsaw was making a knocking noise

Thought it might be a catastrophic engine problem but the ignition module had lost a screw and was knocking against the flywheel. The module was too damaged to refasten. After receiving a new module, I cleaned up the flywheel with steel wool, installed the new ignition module and the chainsaw runs great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Discussion

Discussion for KIT IGNITION - ( 530071905 )

Discussion is closed. To ask our experts a question about a part, use the Q&A feature.

Question: Ignition Module

1304793

Ive replaced almost every part on my Poulan saw with no luck of it starting. I have narrowed it down to the Ignition Module even though the plug was receiving spark. Ive heard if the plug has a weak spark the saw wont start or even turn over ? Can someone conform this?
I'm running out of options,and parts lol

Thx, DD

Hello Even a new spark plug has been proven to be faulty. All of them are not functional. A plug may fire outside the engine grounded to the block, but under engine compression it may fail to. They are funny that way. You should leave the plug in the engine and test it with a quality tester when testing it. Have you done a compression check on your saw? That is VERY important. Low compression, even with new coil, new plug, new carburetor, and new recoil starter; will NOT start if the compression is too low. A stuck piston ring caused by carbon will cause low compression and a no start condition. Low base compression (air leak in crankcase) causes a no start as well. Weak flywheel magnets will result is a weak or non existent spark and a no start condition. CHECK all these things. The malady should show itself eventually. As you have now realized......many things must be just right for a 2 stroke engine to fire up.

Question: MODULE-IGNITION

RONL

HOW MUCH SPACE IS SUPPOSED TO BE BETWEEN THE MODULE AND THE FLYWHEEL

Hi RONL About .010", or the thickness of a standard business card.

Reviews

Average Rating (out of 5):

2 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Just what I needed.f

This was the exact match of the original part. That made it very easy to swap it out.

Guest - October 12, 2019 Verified Purchase

Wrong Part

The part that I got was not the Kit Ignition, it was the cylinder head so the part number and piece number weren't the same.

Guest - September 3, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team