Pulley Idler WE12X83

1 Slid dryer away from wall and removed duct pipe and unplugged dryer
2 Removed control panel, making sure to unplug all internal connections, top of dryer and front of dryer which included door.
3 Found drive belt broke, and while I had dryer apart replaced drum slides, slide bearings, rear bearing assy., door felt, and idler pulley because I had this dryer apart before several years ago and the same parts were wore out.
4 Also replaced drive belt and cleaned all lint from blower housing and duct work, and everywhere else I found inside the dryer.
5 Putting the drum belt on was hard because you have no room for 2 arms inside and you have to route the belt around the drum, idler pulley, and motor pulley, very tricky with one arm and one hand, patience.
6 Reassembled sheet metal and ran, very quiet now