eReplacementParts.com
877-346-4814
Moen Parts
Preferred Partners of
Repair Parts Home  Plumbing Parts  Moen Parts  137028 Hose Service Kit
photo thumbnailphoto thumbnail360 degree photo thumbnail

Hose Service Kit

Part Number: 137028
Moen
Availability: 10 in stock
Price: $53.94
Order within the next 6 hours
and your part ships today!
Product Information
Manufacturer: Moen
Product Number: 137028
Classification: Part
Weight: 0.52 lbs.
Shipping: Ships Worldwide
Description:
This is an original Moen replacement part manufactured for use with kitchen faucets. The hose service kit is a complete assembly including the fittings at each end. This hose is available as an individual replacement part.
Products Compatibility

This item works with the following types of products:

  • • Faucet
Questions & Answers

What is the size of the nut at the faucet end of the hose? Mine is close to inch outside diameter and can't seem to find one in that size
Koehler asked on 2019-12-30
Hello Koehler and thank you for writing. This is about 1 inch. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long and could have a mixture of numbers and letters. We hope this helps. Please contact us anytime if you require further assistance.
Is this hose kit compatible with a moen model #7570 and a moen model # 7545 SRS kitchen faucet?
Ken for model number 7545 SRS asked on 2019-10-22
Hello Ken, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Repair Instructions: Submitted by Customers Like You
23 of 24 people found this instruction helpful
Tool Type:
Faucet
Parts Used:
Hose Service Kit - 137028
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The seal at the attachment at the top end of the hose went bad and was leaking water down the inside of the faucet and filling my cabinet below with water.
I tried some other Universal parts with no success. Found the exact part on e-replacement Parts. Ordered it. Received it. Unhooked the old hose from my faucet. Fed the new part down from the top through the faucet. The hose end is not pliable enough to just push through the bend where the faucet bends down into the counter top. I used a long screwdriver to help feed it through that portion. After that issue was resolved the rest was just about attaching the hose weight and reattaching to the water lines then snapping the locking clip back in place. The time from order to receiving was longer than I wanted but the website spelled it all out so I knew what I was in store for. The part was also pricey at around $50 including shipping. It's an expensive faucet that sells for almost $300. Moen guarantees for life yet this is our 3rd one in the 10 years we've lived in our new house. I'm just glad I could find the exact part so I didn't have to buy an all new faucet again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Faucet
Parts Used:
Hose Service Kit - 137028
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
The Moen sprayer hose was leaking at the base that connects to the pull out handle.
1. Removed sprayer hose from kitchen faucet.
2. Disconnected sprayer hose from faucet base.
3. Pulled old sprayer hose out through faucet opening.
4. Threaded new hose through faucet opening.
5. Re-connected sprayer hose to faucet base.
6. Re-connected sprayer to hose.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Faucet
Parts Used:
Hose Service Kit - 137028
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Xacto Knife
Leak at ball joint ( worn ).
1. Remove old hose and weight. Weight for re-use.
2. Remove gasket / strainer from old hose for re-use. ( Use Xacto )
3. Install gasket / strainer in new hose.
4. Leave protective cap on brass end of hose, feed thru faucet housing.
5. Remove protective caps and make end attachments.
6. Position and lock weight on hose.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Faucet
Parts Used:
Hose Service Kit - 137028
Pull-Out Wand - 140392
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Kitchen faucet hose ruptured.
Fingers to pull the clip under drain in very unreachable area, I developed a blister on my thumb, luckily I was able to remove the clip holding the old hose before the blister fully developed, but then I attached the new hose and spout and the faucet works great now, no complaints.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy fix for old discontinued faucet
    Hose was in perfect condition and an easy fix for a discontinued faucet. Had trouble finding it but EReplacementParts.com came through.
    Peter - November 9, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Moen
    Product Number: 137028
    Classification: Part
    Weight: 0.52 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal