Install
Videos!

Watch The
Repair Video

Nut-hex Ins 712-0429

Part Number: 712-0429

Order within the next 13 hours
and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 912-0429, 1000957, 60072, 912-0429 ((Code: N)), YS-712-0429, 00060072, AF-47810, 01000957, 1983038 and 753-04200.

Product Information

Description:

This is an authentic replacement part generally used on a variety of lawn and garden equipment. It is sourced from original equipment manufacturer and it is sold individually. This nut is a standard hardware which has multiple uses based on equipment. Please refer to appropriate diagrams for correct use/application of it. Please note you would need a wrench when working with this left hand threaded nut.

Warning: California's Proposition 65

Frequently Purchased With

Shear Bolt
$3.99

Compatibility

This part is compatible with the following machines:

Ryobi

600r (41AN600G034) Handheld Trimmer
600r (41BN600G034) Handheld Trimmer
650r (41AN650G034) Handheld Trimmer
13AN688G034 Lawn Tractor
31AE660F013 Snow Thrower

31AE660G034 Snow Thrower
31AE6Q0F034 Snow Thrower
21AB454B034 Tiller
21AB454B734 Tiller

MTD

Yard Machines

13AC762F000 (2008) Lawn Tractor

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Chipper / Shredder
• Cultivator
• Edger
• Lawn Tractor
• Snowblower
• Trimmer

Questions & Answers for Nut-hex Ins

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Snowblower

Parts Used:

Nut-hex Ins - 712-0429

Stud-carb - 710-04939

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Socket set, Needle nosed vice grips

Replacing Carburetor

Removed shroud around carb, disconnected lines, used vice grips to hold fuel line closed. During the process of reassembling the carb to the stud, i tightened the acorn nut down one too many turns and sheared it right off. Be careful tightening them back on because the stud can break easily. So, I had to order a new stud and new nuts for the carburetor.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Shear Bolt - 710-0890A

Nut-hex Ins - 712-0429

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers

Shear blog snapped

Just replaced it

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Carriage Bolt - 710-0451

Nut-hex Ins - 712-0429

Shoe-slide - 784-5580-0637

Plate-shave 24 - 790-00120-0637

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Adjustable Wrench

new parts replaced worn out parts due to friction... slide shoes and plate shave.

unbolted old parts and rebolted new parts; very straight forward repair.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Carriage Bolt - 710-0451

Nut-hex Ins - 712-0429

Shoe-slide - 784-5580-0637

Plate-shave 22 - 790-00117-0637

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set

Consumable parts were worn out

1. Removed 2 side shoes
2. Removed worn out shave plate
3. Installed new shave plate and bolts - tighten loosely
4. Install two side shoes - tighten loosely
5. Adjust height of side shoes
5. Tighten all carriage bolts with nylon lock nuts

Caution" Old shave plate may have a worn on sharper edge due to contact with side walk and or pavement. Suggest you use light gloves to mitigate cut hazard.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information