Hardened Washer 532851074

Blade Adapter 1-1/4 - 532418373

Nut, Hex, Flangelock 5/16-18 - 532426589

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Adjustable Wrench

Blade was broken and fitting were damaged by a worker

I removed the blade bolt, lock washer and the damaged hardened washer and the blade. I then remove the damaged blade adapter. And installed the new one making sure the key in the adapter lined up with the keyway in the shaft. I placed an extra blade I had on the adapter, then installed the new hardened washer, new lock washer and blade bolt. The I removed the damaged flangelock hex nuts, and installed them on the 5/16-18 bolts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Hinge Rod - 532160833

Mower Blade (22-inch) - 532406713

Blade Adapter 7/8 - 581547901

Repair Difficulty:

Easy

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Power Drill, Socket set, Wrench Set

Engine went , had to replace engine with all sub parts.

1. Removed old blade and engine.
2. Cleaned up everything.
3. Installed sub parts on new motor.
4. Installed new motor on deck.
5.Installed new blade hub on motor shaft.
6. Installed new blade.
7. Installed new throttle cable.
8.Completed all sub components on motor and deck.
9. Added oil and gas.
10. Start engine for breakin and test cut.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Adjustable Wrench, None

Lawnmower blad was bent had taken the blade off and had lost the screw for the blade

Well the blade was already off just leaned the lawnmower back. Put new blade on then put washer then hex had screw and tighten with wrench. Think I did well being a woman...

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Power Drill

Blade, Screw and washer missing

Simple repair replaced missing parts

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Blade adapter broke, blade fell off.

Removed old blade adapter. Slid new blade adapter up and into belt. Slid the 2 washers on then he blade. Inserted Hex screw and tightened.

First time ever using ereplacements. Their site was easy to use and order and they had all the parts I needed in stock. It all came neatly packaged within a week. I was happy and will order from them again.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Blade (21-inch) - 532189028

Blade Adapter 1-1/4 - 532418373

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Blade adapter wore out.

Mounted blade adapter, blade, flat washer, lock washer, and nut. Tightened nut.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Bowl beoke

Remove bottom bowl bolt, replaced both parts

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Blade - 532421825

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Blade was dull, needed to be replaced

- emptied gas from mower
- turned mower on side
- used wood block to deter blade from moving loosing nut
- removed old blade, put on new washer/blade, tightened

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Adapter - 581851501

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set

Hit a rock, blade bent and mounting screw broke, sheared the four tabs on adaptor that lock blade in place.

Remove blade, remove plastic housing to get at adaptor. Remove adaptor by loosening the drive belt tension. I was able to slip the belt off between two pulleys to gain the slack needed to remove the adaptor rather than remove a pulley. The blade screw had broken off so that i could grab the piece remaining in the end of the crankshaft, and remove it by hand. Assemble in reverse order. I put low strength loctite on machine threads so screws stay in place.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used: