This handwheel is an authentic OEM component which is specially designed for use with Ridgid table saws. It provides an identical replacement for a faulty or a missing item that was installed on a new unit. The handwheel is an important part of the mechanism that allows a user to lower and raise the blade. Please refer to the appropriate diagrams of your model for the exact location and the correct installation of this part. Note, this high-quality handwheel is made of durable plastic and is sold as an individual component. Replacing it is a simple task that does not require any tools. Remove the elevation lock by hand and attach the new handwheel.
Handwheel 089290001054
OEM part for: Ridgid
Part Number: 089290001054
Jump To:
Frequently Purchased Together ?
Compatibility
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
Customer Part Reviews ?
- 1
- 2
- 3
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Handwheel
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blade would not raise/lower due to worn plastic hand wheel where wheel contacts elevation shaft.
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hand
Handle crank broke off portable table saw in job site trailer
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Adjustable Wrench
Bought crank and handle & reused bolt & screw off original.& reinstalled. It was simple process
Very poor and weak design.
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Epoxy putty or epoxy
Parts Used
Very important improvement installing the new one is filling the cavities with an Apoxsee because this handle breaks for one reason and that is poor engineering in the movement systems of the tool making it very hard.
While in this machine, disassemble all sliding mechanisms that raises the blade, clean really well, grease behind only the parts and most important, put two correct size washers in place of the one Oversized washer behind the lock nut on the threaded shaft that the motor/blade assembly rides on.
The blade height adjustment handle was broken.
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Actually, no tools were required.
Blade would not raise or lower. I stripped hand wheel trying to force it like an idiot. Grease on screw was loaded with sawdust.
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wire brush
Parts Used
Plastic wheel broke
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Loud humming from bearing and brother screwed up bevel rod
Tool Type
Table Saw
Difficulty
Hard
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Wrench Set, Adjustable Wrench, Wheel puller, C ring pliers
Parts Used
- Carbon Brush - 0502025007
- O Ring D29.6 X 1.2t - 441010012
- Washer - 089110102182
- Elevation Lock - 089240028003
- Pan Washer (id64 X Od125 X 05t - 089290001053
- Handwheel - 089290001054
- Spacer Tube - 089290001055
- Bevel Wheel - 089290001056
- Bevel Rod - 089290001059
- C-ring - 089037007062
- Screw (m4 X 8 Mm, Pan Hd) - 089290001061
- Ball Bearing (6200 Zz C3,srl/p - 089290001513
- Ball Bearing (6201 Zlu C3,srl/ - 089110101209
Parts broke and missing
Tool Type
Table Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Adjustable Wrench
Parts Used
- Handwheel Grip - 089037006016
- End Cap - 089037006014
- Lock Nut (1/4-20) - 089290001050
- Washer - 089110102182
- Hand Wheel Knob Screw - 089290001051
- Elevation Lock - 089240028003
- Pan Washer (id64 X Od125 X 05t - 089290001053
- Handwheel - 089290001054
- Spacer Tube - 089290001055
- Bevel Wheel - 089290001056
- Miter Gauge Assembly - 089290001708
- Throat Plate Assembly - 089290001700
- Push Stick - 089290001079
- Rear End Cap - 089290001106
broken part, and another part lost
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
Plastic knob broke
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Removed broken part.
Installed new part.
Installed washer and nut.
Just that simple!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.