eReplacementParts.com
877-346-4814
DeWALT Parts
Preferred Partners of
Repair Parts Home  Power Tool Parts  DeWALT Parts  624730-00 Handle Set
photo thumbnailphoto thumbnail360 degree photo thumbnail

Handle Set

Part Number: 624730-00
DeWALT
Availability: 25+ in stock
Price: $18.11
Order within the next 12 hours
and your part ships today!
Product Information
Manufacturer: DeWALT
Product Number: 624730-00
Classification: Part
Weight: 0.65 lbs.
Shipping: Ships Worldwide
Description:
This replacement handle set is specially designed for use with Dewalt compound miter saws. It is a genuine part that is supplied directly from original equipment manufacturer. This plastic handle is used to safely operate the saw. Please note, the screws to secure this handle are sold separately. Replacing this handle you will need a screwdriver.
Products Compatibility

This item works with the following types of products:

  • • Miter Saw
  • • Saw
Questions & Answers

Hello, I am in need of the upper yellow handle that holds the trigger but haven't been able to track down which one I need. Can you direct me to the correct handle and part number? Thanks in advance
Andrew for model number Dw713 asked on 2019-12-04
Hello Andrew, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: 640596-00. Hope this helps!
Repair Instructions: Submitted by Customers Like You
13 of 13 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Handle Set - 624730-00
Work Light - N030317
Power Supply - N078832
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Power Drill
Upgraded to my dws779 to the dws780 light system
Just removed the handle unit installed light,power supply, and new handle used an old lamp cord to supply voltage to power supply . Completed installation and in use in about 45 minutes it makes cut line up so easy. Unlike the laser system there is no dialing this thing in turn it on line up your cut mark with the shadow line and cut
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Bearing - N110359
Ball Bearing - N127530
Handle Set - 624730-00
Belt Cover - 618193-00
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Torx wrenches, pulley/gear puller
Saw operation was very loud, and it was difficult to turn the blade when the machine was off.
Remove the belt cover and motor cap.
Loosen the motor and belt tensioner and remove the belt.
Remove the motor using the 4 outside bolts not the six inside bolts.
Pull the winding assembly out
Using. pulley or gear puller, remove the belt pulley and large bearing. Note that there is about 1/16 inch clearance between the large bearing and the cooling fan.
Wire brush axle and install new bearing using a deep well socket or pipe that meets the bearing at the inner bushing. Hitting the bearing from the outside can damage it
Replace the pulley.
Repeat process for small bearing and reassemble the motor being careful not to damage the brushes when you reseat the winding assembly.

Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Handle Set - 624730-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Broken handle
Remove the screws from the carrying handle and cover
Remove the screws from the top handle
Remove the switch from the handle
Remove the bottom half of the handle
Reverse order to assemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Belt Cover - 623355-00
Handle Set - 624730-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Power Drill
Handle and side cover cracked
Just unscrew everything and lay the old ones out with the screws in the old parts so you know where they go and swap everything over. One thing to note is on my 716 mitre box the handle does not have the small cover in the diagram (part#618270-00), it is one piece. That would be handy to know ahead of time so you can get the cover if your original handle did not have it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Handle Set - 624730-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Handle set was broken.
Just simply replaced broken part. It was easy to do and works well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Handle Set - 624730-00
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
cracked handel
replaced handle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Handle Set - 624730-00
Work Light - N030317
Power Supply - N078832
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Power Drill, Wire stripper plus connectors
Added light to 779 DeWalt miter saw
Removed stock 779 handle and replaced with 780 handle and power supply / light kit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Handle Set - 624730-00
Work Light - N030317
Power Supply - N078832
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Nutdriver, Wire stripper
It was an upgrade
Removed old handle set, work light blank and wiring cover channel.
Installed work light and work light wiring channel.
Clipped end connector from power supply leads and stripped back wires.
Stopped back original wires in handle set.
Attached power supply wires and taped the connections.
Installed the new handle set and power supply.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Handle Set - 624730-00
Work Light - N030317
Power Supply - N078832
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Nutdriver, Allen wrench
Added LED light to my DWS 779 to make it into a DWS 780
I ordered the handle set, work light and power supply.
The easy to follow online videos gave great instruction.
I thought I was ordering only the top half of the handle for $13. Surprised to get top and bottom.
Did not need to change the bottom part, so left wires in place.
Only remotely difficult part was splicing the power supply leads into the existing saw power leads (black wire to black, white to white). Did not cut the main power leads, but just cut through the insulation and slid apart 1/8" to solder in the smaller power supply wires. Watched several videos before cutting and it went well.
Not too impressed with the final LED light. Not nearly as easy to use as my Porter Cable red laser lights on both sides of the blade. But, better than no light at all.

eReplacement was really easy to work with and they had all the parts and instructions to make this conversion easy to do.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Handle Set - 624730-00
Belt Cover - 618193-00
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Handle was broken and side cover was cracked.
Removed the handle, and side cover replaced side cover and handle. I took a photo of the wire routing so wires could be routed correctly in new handle. Require a torx bit to remove screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great company!
    This company is a great tool in its ownright. Great even with fast customer service! Thanks it was easy to find the piece and it fitted like a glove.
    Guest - February 15, 2021 Verified Purchase
    Great handle
    Perfect fit. Quick Shipping
    Guest - July 15, 2020 Verified Purchase
    Dewalt DWS779 update
    Part arrived as promised by eReplacements Parts. No real problems anywhere. Was kept current on shipping details via e-mail. There is a connector wire required to update the 779 saw. This kit did not come with one. Checked other sources with no luck. Went to YouTube, watched several videos on updating the saw and then built my own connector. All good. I will use eReplacement again.
    Guest - July 8, 2020 Verified Purchase
    Dewalt Mitre saw handle
    This Item was perfect it fit Great, Worked Great, and Arrive Fast. I Love it!
    Guest - December 28, 2019 Verified Purchase
    Great service
    As always, I got exactly what I needed, very quickly. The part was a perfect match for a broken part on a 12 year old miter saw. I will be ordering more parts for "retired" tools.
    Guest - July 15, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: DeWALT
    Product Number: 624730-00
    Classification: Part
    Weight: 0.65 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal