Easy
15-30 minutes
This hand guard is a replacement part sourced directly from the original equipment manufacturer. It is commonly used in chainsaws crafted by Husqvarna. This hand guard should be replaced if it is broken or damaged. A screwdriver is needed to replace this part. A wrench is recommended but not required. This hand guard is sold individually.
Hand Guard 544251501
OEM part for: Husqvarna
Part Number: 544251501
$12.44
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 11 machines
Husqvarna
435 (2008-05) Chainsaw View Diagrams & Manuals
435 E (2008-05) Chainsaw View Diagrams & Manuals
440 E (2008-05) Chainsaw View Diagrams & Manuals
135 (2011-08) From Chain Saw View Diagrams & Manuals
135 E (2011-08) From Chain Saw View Diagrams & Manuals
140 (2012-01) From Chain Saw View Diagrams & Manuals
140 E (2012-01) From Chain Saw View Diagrams & Manuals
435 E II Chain Saw View Diagrams & Manuals
435 II Chain Saw View Diagrams & Manuals
440 E II Chain Saw View Diagrams & Manuals
440 II Chain Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great Parts place
They ship fast, part was just like original, got my chainsaw up and runng again, great place to get parts.
Guest -
November 14, 2022
Verified Purchase
Great part. Everything as expected.
The part was in great condition and worked perfectly. Would buy again.
Guest -
February 10, 2020
Verified Purchase
Broken Handguard
This hand guard arrived in perfect condition and within just a couple of days. Worked great.
Guest -
April 18, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Hand Guard
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broke kick back guard when tree fell across saw.
Adam - February 19, 2016
👍 2 of 3 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, He key
Parts Used
Unscrew two screws holding guard screw new one in place. Guard tube is somewhat in the way and a short allen wrench would be helpful but not necessarily
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade brake was broken
Ron - July 10, 2020
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
Removed screw took old off installed new. Easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
FUEL TANK WAS CRACKED AND WOULD NOT HOLD FUEL
Danny - May 17, 2019
Tool Type
Chain Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, pin punch
1. Remove fuel tank cap, fuel pick-up filter, chain and bar, starter rope housing, handle and hand guard.
2. Remove screws securing engine assembly to springs and fuel tank.
3. Remove engine assembly and disconnect black fuel lines from fuel tank assembly.
4. Remove screw holding trigger cover in place.
5. Remove pin holding trigger and spring assembly.
6. Install trigger and spring and reinsert retaining pin.
7. Position engine assembly on new fuel tank assembly so that you can reach the fuel lines.
8. Carefully re-seat fuel lines so that they do not leak.
9. Reposition engine assembly slightly to align bolt holes.
10. Replace bolts in appropriate holes
11. Reinstall handle and hand guard.
2. Remove screws securing engine assembly to springs and fuel tank.
3. Remove engine assembly and disconnect black fuel lines from fuel tank assembly.
4. Remove screw holding trigger cover in place.
5. Remove pin holding trigger and spring assembly.
6. Install trigger and spring and reinsert retaining pin.
7. Position engine assembly on new fuel tank assembly so that you can reach the fuel lines.
8. Carefully re-seat fuel lines so that they do not leak.
9. Reposition engine assembly slightly to align bolt holes.
10. Replace bolts in appropriate holes
11. Reinstall handle and hand guard.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hand gaurd broke
Josh - June 3, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
Removed Allen head screws attaching hand gaurd to body. Replaced guard and reinstalled screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Safety brake broke.
Carl - February 1, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Removed two hex screws, removed the broken part and replaced it with the new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken handles
Hank - April 1, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Chain Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
, Allen wrench
Parts Used
Removed and replaced broken parts. Simple
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
