Geared Brush Belt (left Side) B-203-6688
Part Number: B-203-6688
Order within the next 2 hours
and your part ships today!
and your part ships today!
Product Information
Specifications
|
Description:
This is a Genuine Bissell geared Motor belt, it is sold individually. When replacing Left Belt it is recommended to replace the Right Belt part #B-203-6804 as well for best operation. The belts on vacuum should be checked periodically. If belts are worn or stretched they need to be replaced to avoid potential damage to the unit. |
Frequently Purchased With
Compatibility
the 34 compatible machines
This part is compatible with the following machines:
Bissell
8920 ProHeat 2X Powersteamer Carpet Cleaner
8930 ProHeat 2X Powersteamer Carpet Cleaner
9200 ProHeat 2X Powersteamer Carpet Cleaner
9200-2 ProHeat 2X Powersteamer Carpet Cleaner
9200-5 ProHeat 2X Powersteamer Carpet Cleaner
9200-C ProHeat 2X Powersteamer Carpet Cleaner
9200-T ProHeat 2X Powersteamer Carpet Cleaner
9300-C ProHeat 2X Powersteamer Carpet Cleaner
9300-D ProHeat 2X Powersteamer Carpet Cleaner
9300-P ProHeat 2X Powersteamer Carpet Cleaner
9400 ProHeat 2X Powersteamer Carpet Cleaner
9400-C ProHeat 2X Powersteamer Carpet Cleaner
9400-H ProHeat 2X Powersteamer Carpet Cleaner
9500 ProHeat 2X Carpet Cleaner
66Q4 ProHeat 2X Carpet Cleaner
66Q42 ProHeat 2X Carpet Cleaner
73A5 ProHeat 2X Carpet Cleaner
8930 ProHeat 2X Powersteamer Carpet Cleaner
9200 ProHeat 2X Powersteamer Carpet Cleaner
9200-2 ProHeat 2X Powersteamer Carpet Cleaner
9200-5 ProHeat 2X Powersteamer Carpet Cleaner
9200-C ProHeat 2X Powersteamer Carpet Cleaner
9200-T ProHeat 2X Powersteamer Carpet Cleaner
9300-C ProHeat 2X Powersteamer Carpet Cleaner
9300-D ProHeat 2X Powersteamer Carpet Cleaner
9300-P ProHeat 2X Powersteamer Carpet Cleaner
9400 ProHeat 2X Powersteamer Carpet Cleaner
9400-C ProHeat 2X Powersteamer Carpet Cleaner
9400-H ProHeat 2X Powersteamer Carpet Cleaner
9500 ProHeat 2X Carpet Cleaner
66Q4 ProHeat 2X Carpet Cleaner
66Q42 ProHeat 2X Carpet Cleaner
73A5 ProHeat 2X Carpet Cleaner
8930M Proheat 2x PowerSteamer
9300-2 ProHeat 2x
94004 Proheat 2x Deep Cleaner
9400-3 ProHeat 2X Power Steamer
24A4 Deep Clean Lift-Off Deep Cleaner
9400-4 ProHeat 2X Powerstreamer Carpet Cleaner
30K7 Deep Clean Lift-Off
66E1 Deep Clean Lift-Off
80X9 Deep Clean Lift-Off
94Y22 Lift-Off Deep Cleaner
27F6 Lift-Off Deep Cleaner
35K3 Lift-Off Deep Cleaner
47A2 Deep Clean Premier
73H5 Lift-Off Deep Cleaner
80R4 Deep Clean Premier
8960 ProHeat 2X Upright Deep Cleaner
9300 ProHeat 2X Upright Deep Cleaner
9300-2 ProHeat 2x
94004 Proheat 2x Deep Cleaner
9400-3 ProHeat 2X Power Steamer
24A4 Deep Clean Lift-Off Deep Cleaner
9400-4 ProHeat 2X Powerstreamer Carpet Cleaner
30K7 Deep Clean Lift-Off
66E1 Deep Clean Lift-Off
80X9 Deep Clean Lift-Off
94Y22 Lift-Off Deep Cleaner
27F6 Lift-Off Deep Cleaner
35K3 Lift-Off Deep Cleaner
47A2 Deep Clean Premier
73H5 Lift-Off Deep Cleaner
80R4 Deep Clean Premier
8960 ProHeat 2X Upright Deep Cleaner
9300 ProHeat 2X Upright Deep Cleaner
Products Compatibility
This item works with the following types of products:
- • Deep Fryer
- • Vacuum
Questions & Answers for Geared Brush Belt (left Side)
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Broken belt on steam cleaner
Removed side cover, replaced belt onto drives and replaced the cover. Very easy. The belts I ordered came in a few days after ordering them. It also saved me almost half the price of what it would have cost me to pick up at a shop and the bonus was not having to drive twenty miles each way to go get them. I did purchase a couple extra belts for the future and the shop I called only had one of the belts I needed. Thanks for the great service.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Power Drill, None
Rollers did not work on my bissell rug cleaner less than a year old !
I looked up the operators manual online and went step by step to repair both rollers loved the time and money I saved repairing myself.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
I broke the front nozzle off my Bissell carpet shampooer
I just removed the broken part with a phillips screwdriver & replaced it with the new one. I was unable to get my replacement parts from Bissell. They were unavailable for a shampooer I had only had 2 years. If not for eReplacement Parts, I would have been very unhappy.
Thank you for your assistance & prompt delivery of the parts.
Thank you for your assistance & prompt delivery of the parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers
Bissell heated carpet cleaner was dropped down a flight of stairs
Replace side covers
Replace front suction assembly
Replace belts (they were 6 years old and well used)
Replace detent lever (the most time consuming)
I'm old school...take it apart and remember the order and where you took it off of. lower end was easy, 5 screws only and only one way to reinstall.
Detent lever required disassembly of upper half of handle followed by disassembly of the lower half. after that it was easy, just two screws. then reverse the order you got there and its done...
Replace front suction assembly
Replace belts (they were 6 years old and well used)
Replace detent lever (the most time consuming)
I'm old school...take it apart and remember the order and where you took it off of. lower end was easy, 5 screws only and only one way to reinstall.
Detent lever required disassembly of upper half of handle followed by disassembly of the lower half. after that it was easy, just two screws. then reverse the order you got there and its done...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Worn, broken, and missing parts
Removed, worn and broken parts. Cleaned the area of repair. Replaced parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belts and swing arms worn out on my carpet cleaner
Removed old parts and replaced. Diagram on you site was like a road map, very easy to see how to make the repair. Machine is working like new. You guys service is the best, parts arrived in three days including the day I ordered. Keep up the good work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Broken belt
Disassembled appropriate area of carpet machine, removed old belt, installed new belt, reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
One of the belts broke.
Removed the front and the left side of the carpet shampooer. Removed the belt sprocket, placed the new belt on. Reattached the sprocket side piece and the front piece.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, None
Belts broke on steam cleaner.
Take off suction cover to gain access to side belt panels. Remove broken belt and reverse to put back together.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Dog's hair wrapped around brush and jambed it. The drive belt broke!
Dismantled bottom front of carpet cleaner and took out brushes and drive belts.
Cut and removed dog hair from around brushes to free up rotation.
Replaced both drive belts with new parts.
Reassembled carpet cleaner and tested.
Works as good as new!
Only tool needed was phillips screwdriver.
Cut and removed dog hair from around brushes to free up rotation.
Replaced both drive belts with new parts.
Reassembled carpet cleaner and tested.
Works as good as new!
Only tool needed was phillips screwdriver.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
6 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Fast shipping
This was easy to find and order from the site. Fast shipping and a good price. Will do business with them again.
Guest -
December 12, 2020
Verified Purchase
Easy to repeat
My vacuum is like knew again the piece( belts) fit perfectly
Guest -
October 25, 2019
Verified Purchase
easy to replace
It arrived quickly and in good condition
Guest -
September 4, 2019
Verified Purchase
Just another purchase thru EReplacements
I have purchased items several times thru EReplacements over the past several years and have always had the same experience. The parts are always the exact ones I need, they fit perfectly, are top quality, the prices are fair and reasonable and the delivery is very fast. I would rate them TEN stars if it were possible!
Guest -
August 27, 2019
Verified Purchase
belt
just like factory
Robert -
May 28, 2019
Verified Purchase
The right model number but the parts still did not fit
the model number for the carpet cleaner matched but nothing else did. I will not be using e replacement parts again
robert -
September 9, 2019
Verified Purchase
eReplacementParts Team
Thank you for your review. I?m sorry to hear that happened. We have contacted you about this and look forward to trying to help you with your issue.
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information