Medium
15-30 minutes
This authentic item is supplied directly from the original equipment manufacturer for use with Echo gas powered backpack blowers. It helps to provide a tight seal for the intake manifold, over time it may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality component is made of durable composite material and is sold individually. Make sure to check the appropriate diagrams of your model for the correct location and application of this hardware.
Gasket-intake V103000461
OEM part for: Echo, Shindaiwa
Part Number: V103000461
$5.29
In Stock
Order within the next 11 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Gasket-intake will fit the following 45 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 17 of 45 matching models.
45 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Echo
- Shindaiwa
This item works with the following types of products:
- Blower
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket-intake
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
carb was dirty bogging down on full speed
Richard - December 7, 2020
Tool Type
Blower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, fuel filter puller tool hex wrench spark plug socket
changed air filter
changed fuel filter
changed spark plug
installed new carb
adjusted idle speed
adjusted hi and lo speed.
it now runs with no bogging down
changed fuel filter
changed spark plug
installed new carb
adjusted idle speed
adjusted hi and lo speed.
it now runs with no bogging down
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing some parts carb gas lines gaskets and starter .
Harold - October 29, 2017
Tool Type
Blower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Replaced all of the parts that were missing .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Only ran while modulating choke
Tom - September 19, 2016
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
, T-25 Torx bit for everything.
I began by removing the plastic cage around the engine in the rear which is held in place by T-25 Torx screws and the air cleaner which is held in place by thumb screws. Once the cover is removed I removed the filter for inspection/replacement and behind it there are (2) phillips screws and (2) T-25 torx screws. I removed the (2) torx as these hold the back of the air box and carb. in place. The screws were around 3+" in length and once removed with air box rear I was able to access the (2) fuel lines for disconnecting very easily. Mine were somewhat brittle and I cut about an 1/8th" off in order to get back to more pliable line with easily enough left for reconnecting. The throttle cable was able to be disconnected with needle nose pliers from the carb. easily enough. I attempted to remove the reed valve behind this assembly however it was stuck in place pretty good and i did not want to break it just to replace a gasket which probably doesn't need replacing anyway so I skipped this. I installed the new carb. and all associated gaskets including rubber bushings and reassembled. I primed the carb. with the bulb a little more than usual until I felt fuel filling it up to ensure fuel had made it's way through the carb. set it to full choke full throttle and it started on the second pull! Runs like a champ again.
Thanks for being so reasonably priced!
Thanks for being so reasonably priced!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
