866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Gasket

Part Number: V107000010
ShindaiwaEcho
Availability: 25+ in stock
Price: $3.99
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: 20000-85220 and 20000-85221.

Description:
This is a genuine manufacturer sourced replacement part designed for use with handheld lawn and garden equipment. It provides a seal for the gas cap. Over time seal will become brittle and compressed, then will have to be replaced. This part is made out of composite material and it is sold individually. No tools needed to replace this gasket, simply remove the old one and place a new gasket inside the fuel cap.
Product Information
Manufacturer: Shindaiwa, Echo
Product Number: V107000010
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Install a Filter Kit on an Echo Trimmer (Model SRM-225)
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
Compatibility

This part is compatible with the following machines:

Shindaiwa
T3410X Trimmer
22F (Before 4100001) Trimmer
22F (After 4100001) Trimmer
M230 Multipurpose Tool
M231 Multipurpose Tool
M2500 Multipurpose Tool
C-20 Brushcutter
LT-20 Trimmer
T-20 Trimmer
F-18 Trimmer
T-18 Trimmer
F230 Trimmer
RC-45 Brushcutter
T-25 Trimmer
C-25 Brushcutter
C-27 Brushcutter
T-27 Trimmer
T-250 Trimmer
C-250 Brushcutter
T220 Trimmer
C230 Brushcutter
AHS254 (T12312001001 - T12312999999) Articulated Hedge Trimmer
AHS254 (T12312001001 - T12312999999) Articulated Hedge Trimmer
EB254 (T10812001001 - T10812999999) Sopladora Blower
EB254 (T10911001001 - T10911999999) Sopladora Blower
EB344 (T15612001001 - T15612999999) Sopladora Blower
EB344 (T15711001001 - T15711999999) Sopladora Blower
C344 (T15012001001 - T15012999999) Brushcutter
C344 (T15111001001 - T15111999999) Brushcutter
C254 (T10512001001 - T10512999999) Brushcutter
C254 (T10611001001 - T10611999999) Brushcutter
M254 (T12912001001 - T12912999999) Multi-Tool
M254 (T13011001001 - T13011999999) Multi-Tool
T254 (T10212001001 - T10212999999) Trimmer
T254 (T10311001001 - T10311999999) Trimmer
T344 (T14712001001 - T14712999999) Trimmer
T344 (T14811001001 - T14811999999) Trimmer
GP344 (T15912001001 - T15912999999) Water Pump
GP344 (T16011001001 - T16011999999) Water Pump
AHS254 (T12411001001 - T12411999999) Articulated Hedge Trimmer
AHS254 (T12411001001 - T12411999999) Articulated Hedge Trimmer
AH254 (T12612001001 - T12612999999) Articulated Hedge Trimmer
AH254 (T12612001001 - T12612999999) Articulated Hedge Trimmer
AH254 (T12711001001 - T12711999999) Articulated Hedge Trimmer
AH254 (T12711001001 - T12711999999) Articulated Hedge Trimmer
T242 Trimmer
LE254 Lawn Edger
EB8510RT Backpack Blower
EB240 Blower
C3410 Brushcutter
C35 (20000001-20002240) Brushcutter
C35 (9014161-9099999) Brushcutter
LE250 Lawn Edger
LE2510 Lawn Edger
LE260 Lawn Edger
F21 Gas Trimmer
T230 (2000303 and Up) Gas Trimmer
T230X (2000303 and Up) Gas Trimmer
T230XR-EMC (36005665-36007144) Gas Trimmer
T230XR-EMC (9013195-9095664) Gas Trimmer
T260B Gas Trimmer
M2510 Multi-Tool
ES726 Engine Sprayer
ES726 (9029001-9039900) Engine Sprayer
T261X Trimmer
22T Trimmer
T230 Trimmer
AHS254 (T12513001001 - T12513999999) Articulated Hedge Trimmer
AHS254 (T12513001001 - T12513999999) Articulated Hedge Trimmer
LE254 (T13212001001 - T13212999999) Lawn Edger
LE254 (T13311001001 - T13311999999) Lawn Edger
LE254 (T13413001001 - T13413999999) Lawn Edger
T282 (T09612001001 - T09612999999) Trimmer
T282 (T09711001001 - T09711999999) Trimmer
Echo

Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Cultivator
  • • Edger
  • • Engine
  • • Hedge Trimmer
  • • Multi-Tool
  • • Paint Sprayer
  • • Pruner
  • • Pump
  • • Trimmer
Expand List
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Gasket - V107000010
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Fuel cap gasket was worn and mangled.
Well the new gaskets diameter is smaller than its perimeter hold inside the fuel cap so it needs to be forced in at two places at once. I just used 2 flat head screwdrivers to force it into its perimeter hold at the opposite sides at the same time. Just kept doing that method in a clockwise or counter until it seats in the perimeter hold.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Gasket - V107000010
Foam Air Filter - A226000670
Rear Air Filter Screen - A230000040
Grommet-Breather - V138000020
Clip - A238000060
Fuel Pipe - V470001080
Screen, Front Air Filter - A230000030
Suction Pipe - V470001110
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Had sat for a long time and gas tank grommets were leaking and pickup tube was broken and carb needed cleaning
Replaced grommets and pick up, sprayed carb with cleaner. Was very easy repair
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Gasket - V107000010
Grommet-Breather - V138000020
Breather Assembly - A039000020
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver, Allen wrench
Fuel primer, valve and breather seals were deteriorated from storage and had to be replaced.
Removed gas tank
Removed and replace tank fuel pick up, breather and associated seals.
Reinstalled fuel tank
lubricated head on brush cutter
Replaced cutting wheel on brush cutter
Cleaned air filter and replaced spark plug.
Started unit for the first time in seven years of storage.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Gasket - V107000010
Purge Bulb - 12318140630
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Jeweler\\\'s screwdriver
Purge bulb was cracked and leaking gas. Replace fill cap gasket
Take air filter cover off. Remove filter. Using small Phillips head remove two long machine screws on either side of intake opening. OBSERVE THE GASKET PLACEMENT FOR REINSTALL. Place screws and gasket in holding container. You don't have to unhook fuel lines on carburetor. Just carefully rotate till purge bulb screws are accessible. Using a jeweler's screwdriver remove the four screws that hold bulb in place. Gently lift bracket and bulb from carburetor. If you use a screwdriver to pry it off be very GENTLE. Carburetor is aluminum and easily scored, causing possible leaks. Remove old purge bulb from bracket and discard. Clean all surfaces using a soft cloth and carburetor cleaner. Spray cleaner onto cloth instead of the parts. Wipe thoroughly clean. Reassemble in reverse order. Firmly tighten all screws without stripping or breaking. When reinstalling carburetor ensure that that throttle cable is still in the butterfly leaver. It just slides and locks in place. In well ventilated space or outdoors refill gas tank, purge the fuel system using purge bulb and start. Check to make sure throttle works. If not, turn off and take the two machine bolts loose from carburetor to gain access to throttle butterfly and reinstall throttle cable as directed above.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Gasket - V107000010
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Lost Gasket for Gas Cap
Just installed gasket on inside of gas cap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Gasket - V107000010
Clutch Shoe Assembly - A056000430
Air Filter - A226000650
Repair Difficulty:
Easy
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set, Alan wrenches
Clutch shoes completly worn out and spring had pulled through the holes.
1. Removed the shaft from the engine.
2. Removed the clutch housing.
3. Unbolted the old clutch assembly.
4. Cleaned the unit and reassembled.
5. Fuel filter I ordered turned out to be for an echo product, so just cleaned the Shindaiwa fuel filter.
6. Gasket was for the gas cap.
7. Worked great when repair was finished. I just love buying professional grade equipment, it really makes a difference.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Gasket - ( V107000010 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Very good gasket
    It was good and fast shipping and also cheap price. Thank you I will order again from you
    junior - 23 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy