866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST

Gasket

Part Number: 900954001
RyobiHomeliteRidgid
Availability: 25+ in stock
Price: $1.99
Quantity:
Ships within 1 business day

*This part replaces obsolete part #: UP03862, 06443 and 06443A.

Description:
Genuine OEM replacement part, this item is sold individually.
The purpose of the 900954001 Gasket is to prevent air leaks and to keep debris and other foreign material from entering the engine.
on some of the machines listed below it is placed between the block and the crankcase cover.
On other machines it is placed in front of the rear housing.
Product Information
Manufacturer: Ryobi, Homelite, Ridgid
Product Number: 900954001
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
Compatibility

This part is compatible with the following machines:

Ryobi
Homelite
Ridgid

Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Hedge Trimmer
  • • Pruner
  • • Trimmer
  • • Vacuum
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Gasket - 900954001
Inline Fuel Fitting - 985304001
Bumper - 98792
Fuel Tank Assembly - 308123004
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Putty Knife
Gas tank was leaking fuel.
1. Drained fuel tank.
2. Removed screws from blower shroud.
3. Removed screws from crankcase cover.
4. Placed rag into crankcase opening to eliminate debris falling into the motor.
5. Removed old crankcase gasket and removed gasket reside with a sharpened putty knife.
6. Disconnected existing fuel lines and removed old fuel tank.
7. Attached new fuel lines and installed new rubber bumpers.
8. Seated new fuel tank.
9. Installed new crankcase gasket and removed rag from Step 4.
10. Reattached crankcase cover.
11. Reattached blower shroud.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Carburetor Gasket - 9071103
Gasket - 900954001
Cylinder Gasket - 900953001
Tank Insulation Gasket - 900999002
Piston Ring 30CC - 690161005
Air Filter - 5687301
Carburetor Gasket - 984834001
Muffler Gasket - 900994006
Intake Gasket - 985248001
Repair Difficulty:
Medium
Time Spent Repairing:
More than 2 hours
Tools Used:
Pliers, Power Drill, Socket set, Nutdriver
Gas/oil mixture leak. hard to start.
I basically rebuilt the trimmer, replacing all available gaskets and fuel lines and filter. I also removed some carbon buildup from the top of the piston and inside the combustion area. I found a damaged clutch during the breakdown and was lucky enough to find one elsewhere since it is a discontinued part. I viewed some repair tutorials from ereplacementparts for areas where I wasn't sure what to do, like, how to remove the drum and broken clutch. Which I needed to purchase a new tool for. A 4" T-25 driver. They were very simple to understand as well as the useful knowledge they contained.

My Ryobi is 11 years old this year with me as the only owner and now its runs like new again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Carburetor Gasket - 9071103
Gasket - 900954001
Heat Dam - 985430001
Carburetor Gasket - 900951004
Heat Dam Gasket - 900950001
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, star bit
Fuel was leaking from the unit , also the heat dam was cracked in half.
I removed the blower tube, removed the plastic cover plat,(take pictures with your cell phone of the position of the throttle line) removed air filter, removed carburetor and heat dam along with gasket.Replace with new gaskets installed the new heat dam and gasket, replaced carburetor, replaced filter and cover installed blower tube. I think the thing that took the most time was cleaning the unit do to the fuel that had leaked. Just make sure you get the throttle line back in the proper position. Works like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Gasket - 900954001
Upper Boom Assembly - 308470013
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver, Tork, screwdriver, long nettlenose pliers PATIENCE on spring
Replaced bent boom shaft , rebuild , replace parts has need. Damaged gasket.
Removed Old boom shaft and replace has need. Need Patience on trigger spring.
Took me 10 times to get it together and kept coming apart.
Was a challenge Picking up spring and strap holder
The vedios repair help but more PATIENCE needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Gasket - 900954001
Cylinder Gasket - 900953001
Piston Ring 30CC - 690161005
Carburetor Gasket - 984834001
Intake Gasket - 985248001
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Torx drives
Low compression, wouldn't start
1. Disassembled clutch and powerhead
2. Removed piston rings,
3. Cleaned piston and installed new rings
4. Lubricated piston, rings and wrist pin bearing
5. Cleaned all gasket surfaces and installed new gaskets
6. Reassembled power head and clutch assy
7. Compression restored and trimmer runs great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Carburetor Gasket - 900994004
Gasket - 900954001
Cylinder Gasket - 900953001
Drum And Connector - 308177001
Rotor W/Starter Pawl - 300952002
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Nutdriver, Tork bits
Drum worn out and split starter pawl spring broke leaked oil
Remove and replace and watched videos for tips.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Carburetor Gasket - 900994004
Gasket - 900954001
Tubing - 0143910
Tubing - 0143922
Fuel Cap - 300758006
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Allen wrench
Failed to start
Removed covers and fuel tank, replaced worn aged tubing and leaking gasket. Removed carb, disassembled and cleaned passages, replaced carb gasket and reinstalled. Added fuel mix and off to the races.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Gasket - 900954001
Cylinder Gasket - 900953001
Carburetor Gasket - 9074002
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Oil leaks due to gasket failures.
Removed the enclosures, covers, fuel tank, carb., muffler, then removed the crankcase cover and the cylinder. Cleaned the gasket areas well then reinstalled the parts with the new gaskets in place. Engine ran well with minor adjustments to the carb. This unit was less than two years old (50 hrs.max usage) and no hard use when it failed. No other problems have occurred, so I thought the repairs were the proper course of action, being that a new unit retails for $229.99.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Gasket - ( 900954001 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
4.5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • gasket exactly the same as original.
    parts received in fast and good condition, only problem is Iam unable to find correct piston rings. the piston rings I ordered are correct in dia. but to thin in thickness. The part #for the piston rings is 690161005. I contacted ryobi and they said if its early than 2014 parts are no longer available, mine was 2006.
    Guest - 11 days ago Verified Purchase
    10 year old Ryobi weed eater engine gasket
    The part was the OEM fit part I needed for the engine / piston fit perfect. Used Tork screw driver tool, Runs great.
    ROBERT - 15 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy