*This part replaces obsolete part #: 537177wasmerged and 535876.
Product Information
Frequently Purchased With
Compatibility
the 27 compatible machines
This part is compatible with the following machines:
DeLonghi
BAR4 Espresso/Cappuccino Maker
BAR4U Espresso/Cappuccino Maker
BAR6B Espresso/Cappuccino Maker Black
BAR6U Espresso/Cappuccino Maker White
BAR6W Espresso/Cappuccino Maker White
BAR8IU Espresso/Cappuccino Maker
BCO120T Espresso/Cappuccino Combo Cafe Figaro
BCO130T Espresso/Cappuccino Combo Cafe Figaro
EC5 Cappuccino Maker
EC5W Espresso Maker
BAR6U Black Espresso/Cappuccino Maker
EC860 Espresso Machine
EC685W Dedica Deluxe Manual Espresso Machine
EC860 Dedica Cappuccino Maker
BAR4U Espresso/Cappuccino Maker
BAR6B Espresso/Cappuccino Maker Black
BAR6U Espresso/Cappuccino Maker White
BAR6W Espresso/Cappuccino Maker White
BAR8IU Espresso/Cappuccino Maker
BCO120T Espresso/Cappuccino Combo Cafe Figaro
BCO130T Espresso/Cappuccino Combo Cafe Figaro
EC5 Cappuccino Maker
EC5W Espresso Maker
BAR6U Black Espresso/Cappuccino Maker
EC860 Espresso Machine
EC685W Dedica Deluxe Manual Espresso Machine
EC860 Dedica Cappuccino Maker
EC5W (0132001019) Espresso Coffee Maker
EC685BK Dedica Deluxe Manual Espresso Machine
EC680R Dedica Manual Espresso Machine Red
EC680BK Dedica Manual Espresso Machine Black
EC5 (132001017) Espresso Pump
BCO130T (132407029) Coffee Combination Machine
BCO120T (132402019) Espresso Coffee Combination Machine
EC685R Dedica Deluxe Manual Espresso Machine
BAR8IU (132007016) Espresso/Cappuccino Maker
BAR6U (132002026) Espresso/Cappuccino Maker
EC680M Dedica Manual Espresso Machine
EC685M Dedica Deluxe Manual Espresso Machine
EC6 Steam Espresso Maker
EC685BK Dedica Deluxe Manual Espresso Machine
EC680R Dedica Manual Espresso Machine Red
EC680BK Dedica Manual Espresso Machine Black
EC5 (132001017) Espresso Pump
BCO130T (132407029) Coffee Combination Machine
BCO120T (132402019) Espresso Coffee Combination Machine
EC685R Dedica Deluxe Manual Espresso Machine
BAR8IU (132007016) Espresso/Cappuccino Maker
BAR6U (132002026) Espresso/Cappuccino Maker
EC680M Dedica Manual Espresso Machine
EC685M Dedica Deluxe Manual Espresso Machine
EC6 Steam Espresso Maker
Products Compatibility
This item works with the following types of products:
- • Coffee Maker
- • Espresso
Questions & Answers for Gasket, Fitted
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Coffee Maker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Coffee maker was leaking water.
1. Pull out the water tank.
2. Remove 2 screws on the back of the coffee maker.
3. Remove top cover by gently pooling it back.
4. Remove 2 screws that hold tubing in place (above the coffee dispenser). Be careful not to lose a small capped spring, that inserts inside the tubing (Cap side up).
5. Replace red "O-ring" gasket.
6. Re-assemble. Be careful to properly insert the spring.
2. Remove 2 screws on the back of the coffee maker.
3. Remove top cover by gently pooling it back.
4. Remove 2 screws that hold tubing in place (above the coffee dispenser). Be careful not to lose a small capped spring, that inserts inside the tubing (Cap side up).
5. Replace red "O-ring" gasket.
6. Re-assemble. Be careful to properly insert the spring.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Leaking Y connector on Espresso machine
Removed the upper cover, removed hose securing clips with pliers, unscrewed mounting screws to cracked part, replaced o-rings and main coffee pressure pod gasket, replaced Cracked Y part, reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Connector broken by the mold seam and the main gasket at coffee filter is crack, on a DeLonghi EC685R.
DeLonghi EC685R with connector and filter gasket broken.
Parts used (from a model EC860):
1 x Gasket [ 537177 ]
1 x Gasket [ 5313221491 ]
1 x Connector [ 5313222031 ]
Instructions:
1. Disconnect power.
2. Remove the water tank.
3. Remove the two Phillips screw (bit #2) from chrome top of the machine.
4. Slide a bit back and pull up at the same time, to remove this top.
5. Disengage (pull out) knob of vapor control (knob at right side).
6. Loose the two Phillips that attach electronic of vapor control, and move carefully to one side.
7. Then you will see the connector at the bottom, attach with two Phillips.
8. Remove Phillips and disengage the two tubings connected.
9. To disconnect each tubing, pull the safety pin and pull out the tubing. Take care of the little o-ring that supposes be attach at the tip of each tubing, but frequently keep trap on connector hole.
10. Remove connector with the red o-ring, be careful with the spring with a round plastic tip, that is located below him.
11. Return this spring to the hole, with the plastic tip looking upward. Then place the new connector with a new red o-ring.
12. Go back in steps, from step 9 to step 3. That's all!!!
Parts used (from a model EC860):
1 x Gasket [ 537177 ]
1 x Gasket [ 5313221491 ]
1 x Connector [ 5313222031 ]
Instructions:
1. Disconnect power.
2. Remove the water tank.
3. Remove the two Phillips screw (bit #2) from chrome top of the machine.
4. Slide a bit back and pull up at the same time, to remove this top.
5. Disengage (pull out) knob of vapor control (knob at right side).
6. Loose the two Phillips that attach electronic of vapor control, and move carefully to one side.
7. Then you will see the connector at the bottom, attach with two Phillips.
8. Remove Phillips and disengage the two tubings connected.
9. To disconnect each tubing, pull the safety pin and pull out the tubing. Take care of the little o-ring that supposes be attach at the tip of each tubing, but frequently keep trap on connector hole.
10. Remove connector with the red o-ring, be careful with the spring with a round plastic tip, that is located below him.
11. Return this spring to the hole, with the plastic tip looking upward. Then place the new connector with a new red o-ring.
12. Go back in steps, from step 9 to step 3. That's all!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Coffee Maker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Coffee maker was leaking water
1. Remove 2 screws on the back of the coffee maker
2. Remove 2 screws holding the nozzle (use magnetic screwdriver)
3. Replace a spring, silicone gasket, and gasket holder
4. Reassemble the coffee maker. Make sure the spring stays in place (gasket side up) and the O-ring is in place.
2. Remove 2 screws holding the nozzle (use magnetic screwdriver)
3. Replace a spring, silicone gasket, and gasket holder
4. Reassemble the coffee maker. Make sure the spring stays in place (gasket side up) and the O-ring is in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information