Product Information
Description:
This is a genuine Hitachi replacement part, it is sold individually. Its purpose is to create a seal and prevent air leaks. Over time this gasket will deteriorate and will have to be replaced. This specific gasket is commonly used in nailers, and is compatible with the models listed below. |
Frequently Purchased With
Compatibility
the 22 compatible machines
This part is compatible with the following machines:
Metabo HPT (Hitachi)
NR83AA3 Clipped Head Framing Nailer
NV83A2 Full Round Head Coil Nailer
NR83A2(S) Framing Nailer, Full Head, Plastic Strip Collation (without Depth Adjustment)
83AA2 Strip Nailer
NR83A 3-1/4" Full Head Nailer
NR83AA 3-1/4" Clipped head Framing Nailer
NR83AA2 3-1/4" Clipped head Framing Nailer
NV75A Nailer
NV83A3 Nailer
NV83A4 Nailer
NR83A3S Strip Nailer
NV83A2 Full Round Head Coil Nailer
NR83A2(S) Framing Nailer, Full Head, Plastic Strip Collation (without Depth Adjustment)
83AA2 Strip Nailer
NR83A 3-1/4" Full Head Nailer
NR83AA 3-1/4" Clipped head Framing Nailer
NR83AA2 3-1/4" Clipped head Framing Nailer
NV75A Nailer
NV83A3 Nailer
NV83A4 Nailer
NR83A3S Strip Nailer
NR83A3 Strip Nailer
NR83AA4 3-1/4" Paper Collated Framing Nailer
NR83A2 Strip Nailer
NR83A5 Strip Nailer
NR83A5(S)M 3-1/4 Inch Rnd Head Framing Nailer W/Out Depth Adjustment
NR83A5M 3-1/4 Inch Rnd Head Framing Nailer W/ Depth Adjustment
NR83AA5M 3-1/4 Inch Clipped Head Fram Nailer Accepts Paper Tape Collated Nails
NV83A5M 3-1/4 Inch Coil Framing Nailer 2 Inch-3-1/4 Inch X 0.099 Inch-0.131 Inch
NR83A2(Y) Nailer
NR83A5(S) Nailer
NR83AA5 Nailer
NR83AA4 3-1/4" Paper Collated Framing Nailer
NR83A2 Strip Nailer
NR83A5 Strip Nailer
NR83A5(S)M 3-1/4 Inch Rnd Head Framing Nailer W/Out Depth Adjustment
NR83A5M 3-1/4 Inch Rnd Head Framing Nailer W/ Depth Adjustment
NR83AA5M 3-1/4 Inch Clipped Head Fram Nailer Accepts Paper Tape Collated Nails
NV83A5M 3-1/4 Inch Coil Framing Nailer 2 Inch-3-1/4 Inch X 0.099 Inch-0.131 Inch
NR83A2(Y) Nailer
NR83A5(S) Nailer
NR83AA5 Nailer
Products Compatibility
This item works with the following types of products:
- • Nailer
Questions & Answers for Gasket (a)
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Nutdriver, Allen wrench
Nail gun would not fire
Removed the old piston bumper and installed the new one and new gasket I have had this nail gun for almost 30 years I know it quite well I also can't believe that I can still get parts for it
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
, allen wrench set, O ring pic, 8mm wrench, hammer, punch.
framing nailer was leaking air when connected to air hose
Dismantled entire gun piston bumper was breaking into small pieces causing air leak. I use my nail guns daily therefore when something like this happens I always do a complete rebuild, in this case the front bumper was also bad. I always allow a few hours thoroughly clean, inspect and rebuild everything properly to extend the time between rebuilds. recommendations: Take your time be patient, drink a beer if necessary and make it like brand new.
P.S. DO NOT REUSE OLD PARTS SUCH AS GASKETS, ROLLED PINS, ETC. CHEERS AND HAVE FUN!
P.S. DO NOT REUSE OLD PARTS SUCH AS GASKETS, ROLLED PINS, ETC. CHEERS AND HAVE FUN!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Allen wrench sets
The lower noise guard gasket was leaking.
Have to remove the slide rail first. The take off the lower rail guide. Clean parts good before replacing parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, ALLEN WRENCHES
NAIL BROKE THE END OFF OF THE PISTON
REMOVED BROKEN PART,REINSTALLED PISTON AND NEW BUMPER.REPAIR FINISHED
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, allen wrench
Nailer wouldn't fire
After disassembly & inspection needed a new piston bumper. Need to remove the entire front nose of the gun including the nail magazine. Once the nose piece is removed the bumper just fits right inside and re-assemble in reverse order
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Long hex wrench
Megazine was broke as well as the top cover and my gasket were blown
Removing the megazine completely
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers, Power Drill, Socket set, Wrench Set, Nutdriver
Nail gun was not sinking nails and air started to leak from gaskets. The piston bumper had broken to pieces and the gaskets had worn out.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
, Allen wrench
Leaking air in several places
Removed end cap and driver guide { nose piece } replaced nose piece gasket, replaced damaged o-ring re-assembled gun and tested. Gun good to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Allen wrench
Leak too much air,
Removed the four screws from the top cover
Looked to see what parts I would need to fix the leak.
I ordered about every o-ring and seal in the gun
Replaced all that I ordered
The gun is like new again
Looked to see what parts I would need to fix the leak.
I ordered about every o-ring and seal in the gun
Replaced all that I ordered
The gun is like new again
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Nailer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set, Nutdriver, picks for \\\'O\\\' rings
leaks air at top and double fire
1. removed top and replaced head cap and gasket
2. Removed cylinder and replaced 'O' rings
3. removed nose and replaced gasket and piston bumper
4. Cylinder plate did not come out easily but other than that repair went well
2. Removed cylinder and replaced 'O' rings
3. removed nose and replaced gasket and piston bumper
4. Cylinder plate did not come out easily but other than that repair went well
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
3 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Better than expected
Fast delivery. Parts are correct and in good shape. Fit perfectly. Back nailing again like new
Phil -
May 8, 2020
Verified Purchase
Great Service
E replacement parts is an amazing service. As a professional carpenter I frequently purchase parts to keep my tools running.
Guest -
July 20, 2019
Verified Purchase
Parts fit as expected
All of the parts were what was needed to fix my power nailer. I would have hoped you shipped a little faster than you did. However your price was much better than all others so it is a wash.
Guest -
July 10, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information