This is an authentic Generac part that is OEM sourced to ensure a high-level of quality. The fuel valve is intended to be used with portable generators. This item is an inline fuel valve that is used to control the flow of fuel from the tank to the engine. This item can stop fuel from reaching the engine when the generator is not in use or in storage. The valve is sold individually.
Valve,fuel Shutoff 0H3419
OEM part for: Generac
Part Number: 0H3419
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 50 machines
Generac
This item works with the following types of products:
- Generator Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Valve,fuel Shutoff
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
My generator fuel line was leaking when the valve was in the 'ON' position
Tool Type
Generator
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, small plastic container to hold gasoline
Parts Used
It was much easier to repair at home than trying to lift it into my truck and take it to a repair shop.
My thanks to eReplacementParts.com for the quick delivery and great on-line catalog.
Leaky gas shut off valve
Tool Type
Generator
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Vise grips
Parts Used
replace a bad fuel valve on a Generac XG 7000 generatio and routine maintence to replace the fuel filter
Tool Type
Generator
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Nutdriver
Carefully remove the valve from the fuel valve holder. With a pair of pliers, remove the hose clamps. My generator is about 10 years old and two of the clamps broke. Its a good idea to have extra clamps on hand.
Carefully remove the fuel lines from the valve and the fuel filter. Slip the clamps on the fuel line and carefully re-attach the fuel lines to the new parts. Clip the valve back into the holder. Check for leaks. If everything is OK, re-attach the instrument panel and start it.
Fuel valve not working, fuel filter dirty
Tool Type
Generator
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Fuel valve leaked when in the "on" position
Tool Type
Generator
Difficulty
Hard
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, 5 mm hex driver
Parts Used
Remove the discharge
Fuel valve leaked.
Tool Type
Generator
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
2. Loosened hose clamps from valve.
3. Took hoses off old valve, pinching ends of hoses to limit spilled gasoline, catching spillage in a pan below.
4. Put hoses and clamps on new valve and snap into place.
Fuel shut off was difficult to operate and had stared to leak fuel.
Tool Type
Generator
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Allen wrench
2. Removed allen screws holding on the front panel to expose hose connections to shut off valve.
3. Disconnected hoses from valve and removed the leaking valve. Popped the fuel valve holder from the panel.
4. Installed the new fuel holder by snapping in into place, (watch orientation).
5. Connect fuel hoses to new valve and snap the valve into place in the valve holder.
6. Reinstall the front panel and the fuel tank. You may wish to put a small amount of fuel into the tank before completing installation of the tank to be certain the the unit is not leaking anywhere).
7. After verifying no leakage refill the fuel tank. Put away the generator and tools, wash hands, Miller Time.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.