This is a genuine OEM replacement part designed for Echo gas trimmers/hedge clippers. The purpose of this fuel line is to to supply fuel from the tank to carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. It is made out of plastic and it is sold individually.
Over time the fuel lines will deteriorate and become brittle so they would need to be replaced.
Fuel Pipe 13201007531
OEM part for: Echo
Part Number: 13201007531
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 40 machines
Echo
This item works with the following types of products:
- Grass Trimmer Parts
- Trimmer Parts
- Hedge Trimmer Parts
This part replaces obsolete part #: 13201007530
Repair Videos ?
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Fuel Pipe
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Fuel delivery issue
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Fuel line broke, foam air filter worn out and fuel tank chusion worn out too.
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, No other
2. Unscrewed the two bolts holding the gas tank. Removed the old fuel line and the old tank cushions. Disconnected the fuel filter from the old fuel line and connected to the new fuel line. Connected the new fuel line to the carburetor line connect and inserted the fuel filter in the fuel tank.
Took out the old two tank cushions and replaced them with the new ones. Placed the fuel tank and tied it down with the two bolts.
Started up the trimmer and the fuel tank was nice and secured without any rattlings. Job completed successfully.
Rough running
Tool Type
Hedge Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, hooked wire to extract fuel filter from tank
Old grommet leaking
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
All the lines for the fuel where dry and cracked.
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Just a Socket for the Spark Plug and an Alen wrench
2. Placed all the lines beside all my new parts and used it as my guide
3. Once I got all the pieces together I pushed the grommet back into the tank (not an easy thing to do)
4. I then took the old primer out and installed the new one, making sure I didn't get any dirt in the small hole for the gas to feed the primer
5. I replaced the old air filter with the new one and again you have to make sure you don't get any dirt in the area.
6. I took the new spark plug and compared the gap to the old one making sure it was the same
7. I then turned the trimmer over and replaced the screw that had been lost
8. I then greased everything and started my trimmer
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.