eReplacementParts.com
877-346-4814
Preferred Partners of
Coleman
Husqvarna
Karcher
MK Diamond
MTD
Craftsman Parts
Repair Parts Home  Power Tool Parts  Craftsman Parts  530069216 Fuel Line

Fuel Line

Part Number: 530069216
CraftsmanHusqvarna
Availability: 25+ in stock
Price: $4.63
Order within the next 11 hours
and your part ships today!

*This part replaces obsolete part #: 5300211-32 and 5300210-26.

Product Information
Manufacturer: Craftsman, Husqvarna
Product Number: 530069216
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.
Compatibility

This part is compatible with the following machines:

Craftsman
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chain Saw
  • • Saw
Questions & Answers

What is the inside Diameter of the fuel line Part # 530069216
John for model number Model #358.360120-16 in. Bar asked on 2018-10-23
Hi John, thank you for your question. It looks like the outer diameter is 3/16" and the inner diameter is 3/32". I hope that helps. Good luck with your repair.
Hi, first question: what is the length of this line? In my owners manual it shows 2 different part #'s for the fuel line. One is fuel line to carburetor part # 530-021025 and one is line kit part # 530-069216. Is the line the same size going into the fuel tank and then going up to the carburetor?
Paul for model number 358355161 asked on 2020-03-03
Hello Paul, thank you for your inquiry. We found that part 530069216 is 25 inches in length. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. We hope this information helps!
My original fuel line is stamped 1/8 IDx3/16 OD. There is no purge return line on this saw. Will this fit my saw, M/N 358353630?
steven for model number 358353630 asked on 2020-01-27
Hello Steven, thank you for your inquiry. We can confirm that fuel line 530069216 is compatible with your model 358353630. We hope this information helps!
trying to get the leaf blower working have parts 2 gas lines and new carb,filter sparkplug gaskets etc, gas lines go into fuel tank one has the filtrer what does the one for
russ for model number 358 794743 asked on 2020-01-22
Hello, Thank you for your question. It looks like one hose goes into the fuel tank, and one goes into the carb/filter. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps.
Is this the return line from carb that empties back into the fuel tank on this model craftsman chainsaw ?
Dan for model number 358.360880 asked on 2020-01-05
Hello Dan and thank you for writing. Yes, it is the return line. We hope this helps. Please contact us anytime if you require further assistance.
Hello, I'm looking for replacement fuel filter and fuel line tubing, but don't see compatibility with my model 358350880 craftsman chainsaw. thanks
greg for model number 358.350880 asked on 2019-12-24
Hello Greg and thank you for writing. Part Number: 530095646 (fuel filter currently on backorder) & fuel line 530069216 are in the list of compatible items for your model. We hope this helps. Please contact us anytime.
I need the fuel lines for leaf blower model #358794742
David for model number 358.794742 asked on 2019-10-31
Hello David, thank you for your inquiry! Fuel lines for your model are part numbers 530069247 and 530069216. I hope this information helps!
Repair Instructions: Submitted by Customers Like You
7 of 8 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069216
Fuel Filter - 530095646
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Fuel line became brittle.
I disassembled the exterior of the saw.
I removed the existing fuel line.
I reran the fuel line from the tank to the carburetor.
I reassembled the saw.
The most difficult part was removing the old filter from the gas tank.
To remove the filter I made a hook out of some wire, and fished the line and filter out
I purposely took my time since I am not a mechanic
Did you find this story helpful?
Thanks for voting and helping fellow customers!
18 of 30 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069216
Boot - 530023373
Fuel Filter - 530095646
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Fuel line from gas tank to carb. On chainsaw separated into several pieces
Removed gas tank from chainsaw to remove filter and all pieces of broken gas line, installed new fuel line to filter, then feed filter into tank , reinstalled tank , then routed fuel line thru boot and into carb.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 6 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069216
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set
My chain saw was in storage for over 8 years. The fuel line was destroyed everywhere I would touch it it would fall apart.
1. Removed cover from right side along with chain and bar.
2. Removed handle and carburetor cover.
3. Disconnection what little line was left noting routing of the fuel line.
4. Connect new line to carburetor and route line along handle to the fuel tank. Make sure you leave enough fuel line to reach the bottom of the tank.
5. Install the tapered end of the line into the tank until you have enough line installed to reach the bottom.
6. Fill the tank with gas and oil mixture.
7. Prime the carburetor by pouring a small amount of gas into the carburetor. With the switch in run pull the rope until it fires. You may need to prom the saw several times to get the air out and enough gas into the line to keep it running.
8. Reinstall the bar chain and covers. Replace the air cleaner and clean or replace the spark plug if needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Fuel Line and Filter - 791-682039
Fuel Return Line - 791-181086
Fuel Line - 530069216
Fuel Line (25-Inch) - 530069247
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers
Trimmer was hard to start and was leaking fuel.
Installed the new fuel filter and the fuel line.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069216
Oil Pump - 530071259
Air Filter - 530037793
Primer Bulb - 530071835
Fuel Line (25-Inch) - 530069247
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver
Fuel lines had completely rotted away. Went ahead and ordered some maintenance parts before use. The saw is like new but has set for over twenty years.
Pulled carb, cleaned fuel tank, installed fuel filter, fresh gas and oil mix. Sharpened chain.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069216
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Power Drill, Socket set, Utility knife
Fuel line broke inside the fuel tank
1. Drained the fuel tank and dropped out the fuel filter
2. Removed the engine cover
3. Removed the air filter
4. Disconnected the fuel lines (primer and main feed)
5. Removed the carb
6. Pulled the main fuel line out of the tank
7. Discovered new replacement tubing was .02 larger in the O.D. but fine in the I.D.
8. Mic'd the hose, found a drill closest to the O.D. and drilled the line hole to the fuel tank
9. Installed the line through the new tight fitting hole,
connected the filter and pulled the excess length back towards the carb.
10. Installed the carb with the primer hose and fuel line cut to a proper length.
11. Installed trigger linkage, air filter, choke handle, engine cover.
12. Refueled, started!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Fuel Line - 530069216
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, long hext key
fuel lines broken and disintegrated
Used a long hex key and screwdriver to take the unit apart. There are quite a few screws to remove.
Some tricky parts:
I have a handheld craftsmen blower and the plastic door that opens where the air enters the blower was a little tricky to put back together. It's the spring that gives you trouble. Just need to assemble the two halves with the spring installed and just before you press them together , use a screwdriver to move the spring hinge behind the plastic stop so it provides tension.

Take photos with your phone as you go along in case you forget how something was put together.

Have a pan ready to empty fuel out of the tank to access the lines.

The smaller fuel line is the supply that connects to the filter and to the primer bulb. You can tell if you have it correct if it sucks the gas when you press the bulb. The other line is the overflow back to the gas tank where excess fuel goes.

When the unit is apart, check the pull cord and replace if it's frayed or worn or you'll have to take apart the unit again. I was able to cut mine shorter where it was frayed and it was just long enough for it to still work.

I also had to take apart and clean the carburetor because it did not run smoothly after the fuel line replacement
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Plug-Spark Rcj-7Y - 15901710230
Fuel Line - 530069216
Carburetor Kit - 530035161
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, 5/32 Allen socket
My chain saw would not stay running. It would start and run out of gas with a full tank.
First I clean the area that I was taking apart. Took apart the carburetor installed the parts put it back together put gas in it and it fired right up. Thank you so much.
Karl
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Fuel Line - 530069216
Fuel Filter - 530095646
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Fuel lines hardened and broken
1. Removed fuel tank from the unit
2. Removed old lines,
3. Installed new lines into the fuel tank,
4. Reinstalled tank
5. Attached fuel lines to carb.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Fuel Line - 530069216
Fuel Filter - 530095646
Fuel Line (25-Inch) - 530069247
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
chaine saw broke fuel lines
watched a video on you tube it was simple to repair
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.9
Average Rating (out of 5):
16 Reviews
Click to filter by ratings:
5 stars
14
4 stars
2
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
NEXT >
  • worked perfect
    was what i needed
    Guest - April 3, 2021 Verified Purchase
    Easy Repair
    Arrived in fast delivery. My lawn blower working like new.
    Guest - December 29, 2020 Verified Purchase
    easy repair
    fit great
    Guest - July 24, 2020 Verified Purchase
    great company
    good parts , helpful website , fast shipping
    Guest - June 22, 2020 Verified Purchase
    Great part.
    My weed wacker works fine. Fast delivery. Part fit. Prime button now works great.
    Guest - June 17, 2020 Verified Purchase
    work great
    great parts took for ever to get it due to virus
    Guest - June 5, 2020 Verified Purchase
    works fine
    perfect fit, expected delay was not that long. Thank you
    Gerald - May 26, 2020 Verified Purchase
    Received parts , easy inst. Chain saw
    Received parts qjuick and install easy, Chain saw running.
    leon - April 10, 2020 Verified Purchase
    Good fit
    Just what I needed for my repair project
    Guest - January 27, 2020 Verified Purchase
    its a fuel line
    works better than the old one with a hole in it
    kevin - November 14, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    NEXT >

    Preferred Partner of

    We sell only genuine Husqvarna ® parts.

    Product Information
    Manufacturer: Craftsman, Husqvarna
    Product Number: 530069216
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal