Easy
15-30 minutes
This is a genuine OEM replacement part designed for Husqvarna gas trimmers/edgers. The purpose of this fuel line is to to supply fuel from the tank to carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. It is made out of plastic and it is sold individually. Please note the fuel filter is sold separately.
Over time the fuel lines will deteriorate and become brittle so they would need to be replaced.
Fuel Line Kit 545081897
OEM part for: Husqvarna, Jonsered
Part Number: 545081897
$18.68
In Stock
Order within the next 10 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 34 machines
Husqvarna
125 E (2005-09) Edger View Diagrams & Manuals
125 E (2006-03) Edger View Diagrams & Manuals
125 E (2008-01) Edger View Diagrams & Manuals
125 E (2006-01) Edger View Diagrams & Manuals
125C (2008-06) Trimmer View Diagrams & Manuals
125C (2008-01) Trimmer View Diagrams & Manuals
125C (2008-02) Trimmer View Diagrams & Manuals
125C (2005-06) Trimmer View Diagrams & Manuals
125C (2007-04) Trimmer View Diagrams & Manuals
125C (2005-09) Trimmer View Diagrams & Manuals
125R (2006-03) Brushcutter View Diagrams & Manuals
125R (2006-10) Brushcutter View Diagrams & Manuals
125R (2007-10) Brushcutter View Diagrams & Manuals
125R (2008-06) Brushcutter View Diagrams & Manuals
125RJ (2007-04) Brushcutter View Diagrams & Manuals
125RJ (2008-06) Brushcutter View Diagrams & Manuals
125RJ (2009-09) Brushcutter View Diagrams & Manuals
125L (2007-04) Trimmer View Diagrams & Manuals
124 L (2008-06) Trimmer View Diagrams & Manuals
125 LDX (545014337) (2010-08) Trimmer View Diagrams & Manuals
125 LDX (2009-09) Row Trimmer View Diagrams & Manuals
125 LDX (2008-06) Trimmer View Diagrams & Manuals
125 LDX (2007-04) Trimmer View Diagrams & Manuals
Jonsered
BC2126 CAN (2009-09) Brushcutter View Diagrams & Manuals
BC2126 EU AU (2010-08) Brushcutter View Diagrams & Manuals
BC2126 ROW (2010-08) Brushcutter View Diagrams & Manuals
BC2126 US (2009-09) Brushcutter View Diagrams & Manuals
CC2126 CAN (2009-09) Brushcutter View Diagrams & Manuals
CC2126 EU AU (2010-08) Brushcutter View Diagrams & Manuals
CC2126 ROW (2010-08) Brushcutter View Diagrams & Manuals
CC2126 US (2010-08) Brushcutter View Diagrams & Manuals
GC2126 C (2008-06) Trimmer View Diagrams & Manuals
GC2126 US CAN (2009-09) Trimmer View Diagrams & Manuals
GT2126 (2008-06) Trimmer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Edger Parts
- Trimmer Parts
This part replaces obsolete part #: 5450302-01, 545030201
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Outstanding
It was the right part. And super fast shipping.
Guest -
June 27, 2023
Verified Purchase
Appeared to have an OEM fit.
Didn't get the change to get out there and rip-it yet, but it went in easily and appeared to be identical to the OEM line.
Ed -
June 9, 2021
Verified Purchase
Wonderful company to order from
We have ordered from ereplacementparts.com several times. Each time, the ordering was easy and if we talked to customer service with a question, we always got help that made our repair complete. This is an example of how a company should be operated because they do it well!
Guest -
November 11, 2019
Verified Purchase
Part was exactly what I ordereddeater runs like nee
Was shipped very quick , weedeater runs likes new
Guest -
June 8, 2019
Verified Purchase
Easy ordering and the parts work great
Fast and easy ordering
Guest -
July 5, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Fuel Line Kit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Leaking fuel line
Danny - June 7, 2016
👍 5 of 5 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Needle Nose pliers
Parts Used
Remove the fuel line grommet from the fuel tank and pull out the leaking fuel line from the tank. Place the fuel filter on the new fuel line that goes into the tank. Insert the fuel filter and line into the tank, making sure that the filter is facing the front of the tank. Press the grommet into the tank making sure that the fuel line with the tab on it is facing towards the fuel tank cap. Push the fuel lines onto the carburetor so the the fuel line with the tab on it is attached to the to the purge stem on the carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel line was leaking (Husqvarna 125L)
Jerry - June 17, 2016
👍 6 of 7 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Not very difficult. Removed gas tank. Pried fuel line from tank. Pulled fuel filter from existing fuel line and installed on new fuel line. Pushed new fuel line into tank and reinstalled tank. Worked perfectly!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cracked gas line
Ken - March 26, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Pulled off old old with pliers and screwdriver. Replaced with new one. Directions were good, told you which line went where. Pretty easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The trimmer would noy prime properly and when I could get it started the trimmer would not idle.
JOHN - August 2, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
1) Remover air filter cover and air filter.
2) Take the 2 nuts off that secure the air filter housing to the engine. Remove the 2 screws on the primer bulb and replace.
3) Remove the primer and fuel line from the tank and carburetor.
4) Install the fuel filter to the fuel line and reinstall in the tank. Attach the lines to the carburetor.
5) Reinstall air filter housing, filter and cover.
Runs great!
2) Take the 2 nuts off that secure the air filter housing to the engine. Remove the 2 screws on the primer bulb and replace.
3) Remove the primer and fuel line from the tank and carburetor.
4) Install the fuel filter to the fuel line and reinstall in the tank. Attach the lines to the carburetor.
5) Reinstall air filter housing, filter and cover.
Runs great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel line leak
John - October 2, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers
Parts Used
Took off carb. Remove old fuel line from carb and tank and replaced with new line. Change fuel filter since I put on a new line it is always good to change the filter at this time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Starter paws would not engage
Peter - September 22, 2020
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Nutdriver, Nut Driver with 8mm allen socket.
Remove recoil Starter, 2 screws. Place a piston stop in spark plug hole or a length of small diameter rope into cylinder to stop upward motion of piston, Remove 8 mm flanged nut, remove starter cup assy and or just replace spring in starter cup. Re-assemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Suction tube had a pinhole that prevented the primer bulb from working.
Philip - November 11, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Removed air filter.
Removed two carburetor retaining nuts.
Removed carburetor giving access to the fuel tank and fuel lines.
Removed old fuel lines.
Reversed procedure for assembly.
Removed two carburetor retaining nuts.
Removed carburetor giving access to the fuel tank and fuel lines.
Removed old fuel lines.
Reversed procedure for assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gas line tore
Anthony - October 16, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Removed file tank removed fuel line installed new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel line repairs on small engines
Anthony - June 2, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
I do small engine repairs and historically one of the biggest problems has been finding the correct replacement parts for the wide variety of machines on the market. Sometime I would need a $4.00 part and spend all day looking for it. E-replacement parts.com has made the job simple by providing on-line access to parts diagrams with part numbers and pricing for almost anything. The fast delivery options are a plus as well. Good job!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old fuel line broke when replacing the carburetor. Replaced the fuel line. Runs like a champ.
Charles - April 11, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Removed the carburetor and popped the old fuel line out of the tank. Installed the new filter to the line. Re-inserted into the tank and installed it to the carburetor. Locked everything down. Runs perfectly. I would suggest downloading the parts list to your equipment. That will help when you want to aquire the appropriate part. Ththis company really comes thru for their customers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
