Fuel Line Kit 545081897
Part Number: 545081897
Order within the next 11 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 5450302-01 and 545030201.
Product Information
Description:
| This is a genuine OEM replacement part designed for Husqvarna gas trimmers/edgers. The purpose of this fuel line is to to supply fuel from the tank to carburetor. By pressing the primmer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. It is made out of plastic and it is sold individually. Please note the fuel filter is sold separately. Over time the fuel lines will deteriorate and become brittle so they would need to be replaced. |
Frequently Purchased With
Compatibility
the 34 compatible machines
This part is compatible with the following machines:
Husqvarna
125 E (2005-09) Edger
125 E (2006-03) Edger
125 E (2008-01) Edger
125 E (2006-01) Edger
125C (2008-06) Trimmer
125C (2008-01) Trimmer
125C (2008-02) Trimmer
125C (2005-06) Trimmer
125C (2007-04) Trimmer
125C (2005-09) Trimmer
125R (2006-03) Brushcutter
125R (2006-10) Brushcutter
125 E (2006-03) Edger
125 E (2008-01) Edger
125 E (2006-01) Edger
125C (2008-06) Trimmer
125C (2008-01) Trimmer
125C (2008-02) Trimmer
125C (2005-06) Trimmer
125C (2007-04) Trimmer
125C (2005-09) Trimmer
125R (2006-03) Brushcutter
125R (2006-10) Brushcutter
125R (2007-10) Brushcutter
125R (2008-06) Brushcutter
125RJ (2007-04) Brushcutter
125RJ (2008-06) Brushcutter
125RJ (2009-09) Brushcutter
125L (2007-04) Trimmer
124 L (2008-06) Trimmer
125 LDX (545014337) (2010-08) Trimmer
125 LDX (2009-09) Row Trimmer
125 LDX (2008-06) Trimmer
125 LDX (2007-04) Trimmer
125R (2008-06) Brushcutter
125RJ (2007-04) Brushcutter
125RJ (2008-06) Brushcutter
125RJ (2009-09) Brushcutter
125L (2007-04) Trimmer
124 L (2008-06) Trimmer
125 LDX (545014337) (2010-08) Trimmer
125 LDX (2009-09) Row Trimmer
125 LDX (2008-06) Trimmer
125 LDX (2007-04) Trimmer
Jonsered
Products Compatibility
This item works with the following types of products:
- • Edger
- • Trimmer
Questions & Answers for Fuel Line Kit
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 5 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Needle Nose pliers
Leaking fuel line
Remove the fuel line grommet from the fuel tank and pull out the leaking fuel line from the tank. Place the fuel filter on the new fuel line that goes into the tank. Insert the fuel filter and line into the tank, making sure that the filter is facing the front of the tank. Press the grommet into the tank making sure that the fuel line with the tab on it is facing towards the fuel tank cap. Push the fuel lines onto the carburetor so the the fuel line with the tab on it is attached to the to the purge stem on the carburetor.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 7 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Fuel line was leaking (Husqvarna 125L)
Not very difficult. Removed gas tank. Pried fuel line from tank. Pulled fuel filter from existing fuel line and installed on new fuel line. Pushed new fuel line into tank and reinstalled tank. Worked perfectly!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Cracked gas line
Pulled off old old with pliers and screwdriver. Replaced with new one. Directions were good, told you which line went where. Pretty easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
The trimmer would noy prime properly and when I could get it started the trimmer would not idle.
1) Remover air filter cover and air filter.
2) Take the 2 nuts off that secure the air filter housing to the engine. Remove the 2 screws on the primer bulb and replace.
3) Remove the primer and fuel line from the tank and carburetor.
4) Install the fuel filter to the fuel line and reinstall in the tank. Attach the lines to the carburetor.
5) Reinstall air filter housing, filter and cover.
Runs great!
2) Take the 2 nuts off that secure the air filter housing to the engine. Remove the 2 screws on the primer bulb and replace.
3) Remove the primer and fuel line from the tank and carburetor.
4) Install the fuel filter to the fuel line and reinstall in the tank. Attach the lines to the carburetor.
5) Reinstall air filter housing, filter and cover.
Runs great!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers
Fuel line leak
Took off carb. Remove old fuel line from carb and tank and replaced with new line. Change fuel filter since I put on a new line it is always good to change the filter at this time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Nutdriver, Nut Driver with 8mm allen socket.
Starter paws would not engage
Remove recoil Starter, 2 screws. Place a piston stop in spark plug hole or a length of small diameter rope into cylinder to stop upward motion of piston, Remove 8 mm flanged nut, remove starter cup assy and or just replace spring in starter cup. Re-assemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
Suction tube had a pinhole that prevented the primer bulb from working.
Removed air filter.
Removed two carburetor retaining nuts.
Removed carburetor giving access to the fuel tank and fuel lines.
Removed old fuel lines.
Reversed procedure for assembly.
Removed two carburetor retaining nuts.
Removed carburetor giving access to the fuel tank and fuel lines.
Removed old fuel lines.
Reversed procedure for assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Gas line tore
Removed file tank removed fuel line installed new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Fuel line repairs on small engines
I do small engine repairs and historically one of the biggest problems has been finding the correct replacement parts for the wide variety of machines on the market. Sometime I would need a $4.00 part and spend all day looking for it. E-replacement parts.com has made the job simple by providing on-line access to parts diagrams with part numbers and pricing for almost anything. The fast delivery options are a plus as well. Good job!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Old fuel line broke when replacing the carburetor. Replaced the fuel line. Runs like a champ.
Removed the carburetor and popped the old fuel line out of the tank. Installed the new filter to the line. Re-inserted into the tank and installed it to the carburetor. Locked everything down. Runs perfectly. I would suggest downloading the parts list to your equipment. That will help when you want to aquire the appropriate part. Ththis company really comes thru for their customers.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
5 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Outstanding
It was the right part. And super fast shipping.
Guest -
June 27, 2023
Verified Purchase
Appeared to have an OEM fit.
Didn't get the change to get out there and rip-it yet, but it went in easily and appeared to be identical to the OEM line.
Ed -
June 9, 2021
Verified Purchase
Wonderful company to order from
We have ordered from ereplacementparts.com several times. Each time, the ordering was easy and if we talked to customer service with a question, we always got help that made our repair complete. This is an example of how a company should be operated because they do it well!
Guest -
November 11, 2019
Verified Purchase
Part was exactly what I ordereddeater runs like nee
Was shipped very quick , weedeater runs likes new
Guest -
June 8, 2019
Verified Purchase
Easy ordering and the parts work great
Fast and easy ordering
Guest -
July 5, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
