Fuel Line Clip V490001230

Specifications

Dimension: 6.5

Description:

This is a genuine OEM replacement part, it is sold individually.
This clip is used in various areas of the over 150 outdoor product models shown below.
It is most commonly used to clamp hoses or tubes in place.

Frequently Purchased With

Fuel Tank Vent..
$7.63

Fuel Filter
$8.60

Fuel Line Grom..
$4.99

Pipe Vent
$5.19

Fuel Return Tu..
$5.19

Fuel Pipe
$4.99

Fuel Pipe
$5.19

Grommet
$4.99

Compatibility

This part is compatible with the following machines:

Shindaiwa

EB633RT (P02511001001-P02511999999) Backpack Power Blower
326T 326T Chainsaw

326T 326T Chainsaw

Echo

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Blower
• Chain Saw
• Drill
• Edger
• Grass Trimmer
• Saw
• Trimmer

Expand List

Repair Guides

Watch the Repair Video for Fuel Line Clip

Articles:

How to Install a Filter Kit on an Echo Trimmer (Model SRM-225)

Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....

May 27, 2015

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Fuel Filter - A369000480

Fuel Line Clip - V490001230

Fuel Grommet - 13211539131

Spiral Fuel Pipe - 13201239131

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Fuel line and grommet were leaking

Removed air filter and carburetor. Pryed out grommet with screwdriver and removed filter and line. Placed filter and clip on line and sprayed the other end with silicone spray and pushed through grommet. Placed filter and line through tank and pushed grommet in. Installed carburetor and air filter.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Blower

Parts Used:

Fuel Line Clip - V490001230

Grommet - 13211502961

Fuel Pipe - V471000771

Pipe-fuel - 13201008260

Pipe-return - 13201608260

Fuel Filter - A369000460

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Nutdriver

Fuel lines had decayed (old) and insufficient fuel was delivered.

Removed the fuel tank and installed new lines and filter through grommet. Removed carburetor, cleaned and re-installed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Fuel Line Clip - V490001230

Grommet - 13211502961

Fuel Pipe - V471000771

Connector-pipe - 13201108260

Pipe-fuel - 13201008260

Connector-pipe - 13202108260

Pipe-return - 13201608260

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Allen wrench

Broken fuel line

Removed carburetor and rerouted fuel line

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Fuel Line Clip - V490001230

Spark Plug - 15901019830

Fuel Pipe - V471000771

Air Filter - A226000032

Fuel Filter - A369000460

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Blower would not start & fuel line was broken

Repaced these specific parts according to the directions in the product manual. Once complete the blower started up after a few pulls.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Fuel Tank Vent - A356000031

Fuel Line Clip - V490001230

Spark Plug - 15901019830

Fuel Filter - A369000460

Grommet - 13211544331

Pipe-vent - Grommet - 13201239332

Pipe-fuel-spiral - 13201038332

Filter- Air - 13031038331

Carburetor -- Wt-901a - A021001471

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Allen wrench (hex key)

Chain saw would not idle

1. Removed air filter
2. Removed top saw plastic case cover
3. Took phone photos of the carburetor, fuel, and vent lines, and throttle and choke linkage.
4. Loosened control backing plate
5. Unscrewed carburetor
6. Detached fuel and vent lines, grommets and control linkages
7. Plucked fuel filter from tank using a hooked shaped wire
8. Reattached fuel, vent lines, grommets and linkages to new carburetor while cleaning dirt and sawdust along the way
9. Reattached carburetor and put on new air filter and spark plug

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Fuel Filter - A369000480

Fuel Line Clip - V490001230

Purge Bulb - 12318139130

Air Filter - 13031039132

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Echo chainsaw would lose power and quit!

Removed the tank grommet then pulled out the old filter, replace the filter on the fuel tube with the clip. And the inserted the new filter back in. The old fuel filter looked fine but the saw just would not run. I decided this might be a cheap fix if it worked. The saw ran great after replacement of the fuel filter. I removed thew air filter cover and replaced the air filter, then reinstalled the air filter cover.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Fuel Line Clip - V490001230

Air Filter - A226000032

Carburetor-c1m-k77 - A021000894

Fuel Filter - A369000460

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers, allen wrenches

Needed Carb

Remove Bad Carb. And Replace With The New One. Also The Fuel Filter And Air Filter Do The Same. No Problems.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

5 Reviews

Click to filter by ratings:

5 stars

5

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Easy Repair

Ordered a complete list of fuel line replacement parts. Individual package identification matched the exploded diagram and help get the right part in the correct order, in the proper location. Really help the reassembly.

Guest - February 21, 2020 Verified Purchase

Made repot easy

It was just like factory.

Martha - February 20, 2020 Verified Purchase

great parts, they worked as expected

perfect fit for my echo blower ,,,, works great

Guest - January 23, 2020 Verified Purchase

Easy to install

Great fit

Harry - November 18, 2019 Verified Purchase

Replacement part

Exactly as advertised...received all I ordered! I can now charge both of my ring batteries at the same time when needed!!

Guest - May 29, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Fuel Line Clip