Fuel Hose 581756205

Air Purge - 503936601

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, Allen wrench

fuel lines and air purge old and brittle ('09) Husqvarna 223L Trimmer

Removed starter assy housing ( 3allen screws ) just for easier accessability , removed top cover ( 1 allen screw ) - took picture of three fuel lines (routing) - simply removed and replaced all above items mentioned . RUNS GREAT ! Cheaper than buying a new trimmer !

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Spark Plug - 503235111

Oiled Air Filter - 537186301

O-ring - 537184901

Eyelet - 501783301

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Torx driver

Fuel leaking from grommets.

Removed 5 or 6 torx screws, removed fuel lines and old fuel filter. Reinstalled with new parts.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Pliers, allen wrench with the trimmer

hose/tank grommets leaked when trimmer tilted during operation

Removed covers including recoil starter assy.
Removed fuel tank, disconnecting fuel lines.
drained/emptied fuel tank.
Removed priming bulb and fuel lines.
Removed fuel lines and grommets from fuel tank.
Installed new grommets in tank.
installed new lines in tank.
installed new lines to priming bulb.
installed priming bulb and lines.
connected lines to carb.
reinstalled tank.
reinstalled covers and recoil starter assy.
checked all connections and retightened all screws.
fueled the unit.
Started unit checking for leaks, none found.
trimmer ops ck satis.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Nutdriver, Long needle nose pliers

Fuel line and grommet leaking where it exits the fuel tank.

Remove upper handle and lower the throttle handle assembly to access fuel line and grommet where it inters fuel tank. You have to remove carburetor and linkage to lower the lower handle assembly. Feed the new fuel line through the grommet and push the new fuel line through the fuel tank from the outside. You will need long needle nose pliers to grip the fuel line at inside bottom of the fuel tank. Reattach the fuel filter and reassemble.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Seal Collar - 503544201

Gasket - 503544301

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, allen wrench

fuel line leak , seal collar deteriorated

drain fuel tank
remove covers to access carburetor
disconnect linkage on each side of carb
remove carb and fuel line and remains of seal collar
reassemble with new fuel line , seal collar and carb gasket , install covers

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers

Gas leak

1. Removed the shroud and starter rope assembly, 4 torx screws.
2. Removed fuel tank, existing fuel lines and fuel filter, noting the locations for reinstall.
3. Installed new fuel lines and existing fuel filter.
4. Reassembled removed parts, filled with fuel and started. Runs great and no leaks.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

, Allen wrench

Trimmer fuel line broke

1. Remove fuel tank with Allen wrench.
2. Replaced broken lines and filter.
3. Reinstalled fuel tank.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Right Hand Exhaust Pipe - 583954801

Chain Catcher - 501686801

Plate - 537046601

Antivibe Mount - 503895601

Antivibe Mount - 503637603

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set

Anti vibe was broken. The saw is 18 yeas old; the rest was to bring the saw up to grade. like new.

Look at it. Take it apart and install the new ones

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Socket set

Found that fuel line to the filter had a broken.

1. Remove both upper and lower cover. The lower cover had to be removed to get access to the connection of the hose to the carburetor.
2. Remove broken hose by disconnecting it from the carburetor and pulling it through the grommet in the tank.
3. Insert the new hose through the grommet in the tank, cut it square and connect to the carburetor, trim the other end to length, harvest the old clamp from the old hose, insert the hose over the nipple on the filter and clamp it. Insert the filter and hose inside the tank.
4. Ran very good for one tank full of fuel.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 2 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Spark Plug - 503235111