Easy
15-30 minutes
Genuine Milwaukee replacement part, this item is sold individually.
This Front Handle has been used on basically every Bandsaw Milwaukee has manufactured.
It is a one piece solid handle.
It is mounted to the saw by using screw part number 06-75-4675.
Front Handle 31-44-0330
OEM part for: Milwaukee
Part Number: 31-44-0330
$9.16
In Stock
Order within the next 13 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.16 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 67 machines
Milwaukee
6230 (SER 678-1001) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678-1105) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678-26651) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678-31501) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678-32001) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678A) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678B) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678C) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678D) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678E) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678F) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678G) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678H) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6230 (SER 678J) 4-3/4 Inch Deep Cut Band Saw View Diagrams & Manuals
6236 (SER 769-1001) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6236 (SER 769-1901) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6236 (SER 769A) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6236 (SER 769B) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6236 (SER 769C) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6236 (SER 769D) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6236 (SER 769E) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6236 (SER 769F) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6236 (SER 769G) Two Speed Deep Cut Bandsaw View Diagrams & Manuals
6232-4 (SER 678A) 4-3/4 Inch Deep Cut Bandsaw View Diagrams & Manuals
6232-4 (SER 678B) 4-3/4 Inch Deep Cut Bandsaw View Diagrams & Manuals
6232-4 (SER 678C) 4-3/4 Inch Deep Cut Bandsaw View Diagrams & Manuals
6227 (SER 674-9466) Band Saw View Diagrams & Manuals
6225 (SER 457F) Bandsaw View Diagrams & Manuals
0729-20 (SER A59A) Bandsaw View Diagrams & Manuals
6227 (SER 674A) Bandsaw View Diagrams & Manuals
6225 (SER 457C) Bandsaw View Diagrams & Manuals
6225 (SER 457B) Bandsaw View Diagrams & Manuals
6227 (SER 674-1001) Bandsaw View Diagrams & Manuals
6234 (SER 674D) Bandsaw View Diagrams & Manuals
6227 (SER 674-23301) Bandsaw View Diagrams & Manuals
6225 (SER 457-1001) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-112000) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-124821) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-150887) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-222501) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-233901) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-242250) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-45000) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-95000) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457-96817) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457A) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457D) Two Speed Band Saw View Diagrams & Manuals
6225 (SER 457E) Two Speed Band Saw View Diagrams & Manuals
6232-55 (SER 678A) 120mm Deep Cut Band Saw View Diagrams & Manuals
6232-55 (SER 678B) 120mm Deep Cut Band Saw View Diagrams & Manuals
6232-55 (SER 678C) 120mm Deep Cut Band Saw View Diagrams & Manuals
6232-55 (SER 678D) 120mm Deep Cut Band Saw View Diagrams & Manuals
6223 (SER 822B) Band Saw View Diagrams & Manuals
6223 (SER 822C) Band Saw View Diagrams & Manuals
6223 (SER 822D) Band Saw View Diagrams & Manuals
6223 (SER 822E) Band Saw View Diagrams & Manuals
0729-21 (SER A59A) Cordless Band Saw View Diagrams & Manuals
6227 (SER 674-4271) Speed Control Bandsaw View Diagrams & Manuals
6227 (SER 674-25901) Speed Control Bandsaw View Diagrams & Manuals
6227 (SER 674-27001) Speed Control Bandsaw View Diagrams & Manuals
6227 (SER 674B) Speed Control Bandsaw View Diagrams & Manuals
6227 (SER 674C) Bandsaw View Diagrams & Manuals
6227 (SER 674D) Bandsaw View Diagrams & Manuals
6234 (SER 674E) Bandsaw View Diagrams & Manuals
6234 (SER 674F) Bandsaw View Diagrams & Manuals
6234 (SER 674G) Bandsaw View Diagrams & Manuals
6226 (457-45000) Band Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Band Saw Parts
- Saw Parts
Repair Videos ?
Watch the Repair Video for
Front Handle
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Perfect Part
The part is exactly what we took off of the tool.
Philip -
June 15, 2020
Verified Purchase
perfect
perfect fit
Guest -
September 11, 2019
Verified Purchase
It worked
Parts fit perfectly
Guest -
September 9, 2019
Verified Purchase
Easy Repair
Perfect fit for our repair. Very easy installation.
Bryan -
July 30, 2019
Verified Purchase
PERFECT FIT
PARTS ARRIVED QUICKLY, AND WERE A GREAT FIT.
Guest -
July 26, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Front Handle
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The brush tubes had overheated causing the tube carrier to melt so, no op.
David - March 22, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Torx Bit set
Parts Used
Disassembled the handle to expose the wiring and the switch. Removed screws to the front guide roller, track and armature housing. Used flat tip screw driver to gently pry the stator housing from the gear drive cover (there is a thin gasket between the 2 parts). Removed 2 screws holding the field windings and the brush/tube carrier housings. Disconnected the white wires from the brush carriers and replaced the housings, brush carriers and brushes (after reassembly). I stoned the commutators and reassembled the saw in reverse order. The band saw works like new and the parts fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle broke.
cynthia - August 17, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Replaced the handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
inconsiderate co-workers abuse equipment
Charles - January 25, 2019
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
replaced broken and worn parts also had to tighten the gear drive
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The pulley support comes with no threads In the four boss bolts holes that hold the adjustment plates
Wayne - April 15, 2018
Tool Type
Band Saw
Difficulty
Expert
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Nutdriver, Tap wrench 1/4-20 pilot plug tap and a 1/4-20 bottoming tap
I had to manually hand tap the four boss holes. I used a 1/4-20 pilot plug tap and a bottoming tap to get this done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade would not track correctly.
John - March 31, 2018
Tool Type
Band Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Allen wrenches
Replaced the bushings, the blade guides, and also the belts for the pulleys. With parts, the repairs worked perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle broke.
Tyler - July 22, 2017
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
Replaced with the new handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Handle was broken
Marko - March 21, 2017
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen key
Parts Used
Just removed the bolt and the broken handle. Replaced with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing parts
Tom - October 5, 2016
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Allen wrench
I bought the saw at a flee market and it was missing these parts. Easy replacements.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing front handle
michael - July 12, 2016
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Removed screws and attached the new handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Missing parts and a scraping blade guard
William - May 1, 2016
Tool Type
Band Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Torx driver
It's a common occurrence, I needed a tool, but couldn't afford new. I'd been watching eBay and a unit came up that looked like it had been through two or three careers. But I checked eReplacement Parts and saw that all the parts I needed to make it whole again were in stock. The replacement bands were easy to push onto the wheels, and the existing blade guard had a huge dent in it that made the blade scrape. It was a simple swap out with the new one using a few torx drivers. The front handle was missing, but that too was a breeze to replace with the brand new one. I put a touch of loctite blue and tightened it down with an allen wrench. The shoulder 3/8" x 16 bolt provided by eReplacement Parts was a perfect fit. I also put in a new cord and cord protector. The hardest part was packing all the wires back in so the handle would close nicely. At the end of the day there are faster ways to cut metal, but nothing compares to the band saw in terms of accuracy. I can split hairs with this thing. Thanks eReplacement Parts!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
