Easy
15-30 minutes
This replacement foot is secured to the frame helping to keep the equipment stable, it is adjustable for variable ground levels. It is a genuine item that is supplied directly from original equipment manufacturer for use with Bosch table saws. This part is made from durable rubber material with a metal threaded shaft and a wing nut that helps to secure it. Please note this foot is sold individually.
Foot 1619PB2871
OEM part for: Bosch
Part Number: 1619PB2871
$7.22
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 9 machines
Bosch
4100-09 (3601L13010) 10" Worksite Table Saw View Diagrams & Manuals
TS2000 (0601B12010) Wheeled Table Saw Stand View Diagrams & Manuals
T4B (3601L12110) Miter Saw Stand View Diagrams & Manuals
GTA500 Folding Table Saw Stand View Diagrams & Manuals
GTS1041A (3601M13510) Table Saw View Diagrams & Manuals
TS3000 (2610950176) Table Saw View Diagrams & Manuals
TS2100 (0601B12510) Table Saw View Diagrams & Manuals
GTA 47 W (3601M12610) Gravity-Rise Wheeled Stand View Diagrams & Manuals
4100 (3601L13012) Table Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
- Miter Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Always receive parts quickly And they were always the right one
I Recommend a ereplacement parts to everyone
Guest -
June 30, 2020
Verified Purchase
Parts as advertised
Part was available, and received as advertised. Shipping costs were excessive, hence minus one star.
iGlobal -
22 days ago
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Foot
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
This was an upgrade of missing or damaged parts
Leroy - December 2, 2021
Tool Type
Table Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Hammer, punch
Removed torn or damaged labels. Cleaned the surface with alcohol. Carefully removed the label backing and carefully placed on machine being sure it was properly placed in the space outlined for the labels.
Using a small metal punch and ball peen hammer, removed a rolled pin which attached the handle to the ripping fence. Departed the rubberized name piece from the handle by sliding the two pieces of the handle apart. Replaced the new piece, making sure a connecting and was in line with the rolled pin hole. Using the hammer, replaced the rolled pin.
Unthreaded the two foot pads from the saw frame by loosing a wing nut used to lock the foot in place. Threaded the new rubber pads into the frame, with a wing nut on the threaded part of the pads. Adjust the pads until the saw table is level. Place the level on the saw table and adjust the pads until the level shows level. Lock the new rubber foot pads in place using the wing nuts.
Using a small metal punch and ball peen hammer, removed a rolled pin which attached the handle to the ripping fence. Departed the rubberized name piece from the handle by sliding the two pieces of the handle apart. Replaced the new piece, making sure a connecting and was in line with the rolled pin hole. Using the hammer, replaced the rolled pin.
Unthreaded the two foot pads from the saw frame by loosing a wing nut used to lock the foot in place. Threaded the new rubber pads into the frame, with a wing nut on the threaded part of the pads. Adjust the pads until the saw table is level. Place the level on the saw table and adjust the pads until the level shows level. Lock the new rubber foot pads in place using the wing nuts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I bent a foot on my miter saw when transporting it with low tires.
Jay - April 18, 2016
Tool Type
Miter Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, thread tap
Parts Used
Remove the bent foot. Re-tap the threads as I couldn't start the replacement foot into the threads. Installed the replacement foot.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
