Grid squares measure 1x1 inch

Watch The
Repair Video

Foot WP9709707

Part Number: WP9709707

Order within the next 13 hours
and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: , 9709707, 9709707, 115792, 4159648 and 4161530.

Product Information

Description:

This part is an OEM from Whirlpool for use with Whirlpool Stand Mixers. The rubber foot supports the base of the stand mixer on the countertop. The most common reason for replacing the rubber foot is if touchpad does not respond. This part is sold individually. There are no tools need to replace the rubber foot.

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

KitchenAid

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Blender
• Mixer

Questions & Answers for Foot

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Feet hardened

1. Removed old feet.
2. Installed new feet.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, none needed

Rubber foot fell off and was missing

I just pressed the new foot on. I'm pleased that you had the part and it was so simple.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Almond Appliance Touchup Paint - WP72107

Repair Difficulty:

Medium

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Tools not needed.

Rubble fleet replacemant, and touch-up paint- Almond

I removed the (5) foot, base, and replaced them with (5) new rubble feet. Then retouched the paint on the mixer.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Knife

The rubber anti skid pads were worn out.

It was as easy as taking out the old rubber pads and inserting the new ones.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

The Rubber Feet in the base had flattened out.

Used a screwdriver to pry out the old feet. Then inserted the new feet.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Mixer came to me missing a rubber foot base.

Put rubber foot base on the bottom. Works great!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Stand Mixer Flat Beater - WPW10672617

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Missing foot

Installed foot, ordered new beater for when I need it.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers

Original feet were worn out and one was missing.

Removed the old feet by pulling them out of sockets. Had to use pliers to pull a couple out though as they were stuck in place. Installed new feet by pushing them into sockets. KitchenAid has changed styles, so new feet look different then old. Their new larger base holds the mixer in place even better.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 2 people found this instruction helpful

Tool Type:

Mixer

Parts Used:

Foot - WP9709707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

One of the rubbber feet feel off during moving.

Took the new part out of the shrink wrapped bag and snapped it into the location of the original part that was missing.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Mixer

Parts Used:

Kitchenaid Wire Whip - WPW10731415

Foot - WP9709707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, None

Foot pads were worn and whip was bent

Attached new wire whip. Took old foot pads off mixer stand and popped the new ones in, worked great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information