866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Vacuum Parts  Shop-Vac Parts  9058500 Foam Sleeve

Foam Sleeve

Part Number: 9058500
Shop-Vac
Availability: 25+ in stock
Price: $6.77
Quantity:
Order within the next 7 hours
and your part ships today!

*This part replaces obsolete part #: and SV9058500.

Description:
This is an original manufacturer-approved replacement part which is specially designed for use with Shop-Vac vacuums. Its purpose is to filter out dust and debris from the air that goes through the unit. Over time it will wear out and may get clogged eventually requiring a replacement to ensure the best performance. Refer to the owners manual of your model for the correct installation of this foam sleeve. Keep in mind it is sold as an individual component. Replacing it is a simple task that does not require any tools, simply remove the old and secure the new.
Product Information
Manufacturer: Shop-Vac
Product Number: 9058500
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
Compatibility

This part is compatible with the following machines:

Shop-Vac
2E150 (201-15-00) 1 Gal. 1.0 HP Hang Up Mini Wet / Dry Vac
2E200 (201-14-00) 1 Gal. 1.0 HP Hang Up Mini Wet / Dry Vac
84L300 3.0 HP Wet / Dry Vac
84L350 (10 Gal.) 3.5 HP Wet / Dry Vac
84M200 (5 Gal.) 2.0 HP Wet / Dry Vac
84M250B (6 Gal.) 2.5 HP Wet / Dry Vac
85L350 (8 Gal.) 3.5 HP Wet / Dry Vac
85L500 (12 Gal.) 5.0 HP Wet / Dry Vac
85M300 (6 Gal.) 3.0 HP Wet / Dry Vac
85S200 (4 Gal.) 2.0 HP Wet / Dry Vac
86L250B (10 Gal.) 2.5 HP Wet / Dry Vac
86S150 (2.5 Gal.) 2.5 HP Wet / Dry Vac
86S200 (2.5 Gal.) 2.5 HP Wet / Dry Vac
87L400 (10 Gal.) 4.0 HP Quiet Delux Series Wet / Dry Vac
87P350 (10 Gal.) 3.5 HP Wet / Dry Vac
92P350 (10 Gal.) 3.5 HP Wet / Dry Utility Vac
92P350 (12 Gal.) 3.5 HP Wet / Dry Utility Vac
92P600A (16 Gal.) 6.0 HP Wet / Dry Vac
92P650A (14 Gal.) 6.5 HP Stainless Steel Wet / Dry Vac
92P650A (18 Gal.) 6.5 HP Wet / Dry Vac
92P650A (22 Gal.) 6.5 HP Wet / Dry Vac
610B (10 Gal.) 2.0 HP Industrial stainless steel vacuum
610B (16 Gal.) 2.0 HP Industrial Vacuum
950B (10 Gal.) 4.5 HP Stainless Steel Industrial Vacuum
950B (14 Gal.) 4.0 HP Industrial Vacuum
970C (10 Gal.) 3.0 HP Stainless Steel Industrial Wet / Dry Vac
970C (20 Gal.) 3.0 HP Stainless Steel Industrial Wet / Dry Vac
2015A (1 Gal.) 1.0 HP Hangup Mini Wet / Dry Vac
BLB450 (10 Gal.) 4.5 HP Blower Series
E87R250B (4 Gal.) 2.5 Hp All Around Plus Vacuum
J150A (1.5 Gal.) 1.5 HP Hang On Portable Vacuum
K250 (2.5 Gal.) 2.5 HP Hang On Portable Vacuum
QAL80A (3 Gal.) All Around Series Vacuum
QAM70 (2 Gal.) All Around Series Vacuum
QAMF60 (2 Gal.) All Around Series Vacuum
QAS60 (1.5 Gal.) All Around Series Vacuum

Products Compatibility

This item works with the following types of products:

  • • Blower
  • • Vacuum
Questions & Answers

The foam filter is torn. If I only use the vac for dry purpose, do I need a foam filter? Will the cloth filter that covers it be enough? Thank You
Davidlee for model number 84M200
Hello David, thank you for your question. The manufacturer does recommend having this filter in place to optimize the performance of the vac. Its purpose is to filter out dust and debris from the air that goes through the unit. Over time it will wear out and may get clogged eventually requiring a replacement to ensure the best performance. I hope this helps!
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Foam Sleeve - 9058500
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Just both of my hands
Nothing was wrong, it simply needed a new filter on it after 20 years of own this small shop-vac
It was extremely simple. I carefully placed my hands inside of the foam filter and expanded my hands and fingers enough to gently get the new filter slipped on and in place. Very easy.

I would recommend being as gentle with a new foam filter as possible so it is not torn while putting it in place where it fits around a cage-type structure. Then check carefully to ensure that the filter, which is in the form of a sleeve, is covers everywhere to include it being positioned as high up on the outer cage it fits over and being careful not to place it too far up that it creates a gap at the bottom.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Foam Sleeve - 9058500
Reusable Dry Filter - 9010700
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools required
suction was reduced
1. removed old foam sleeve
2. put on new foam sleeve
3 put on dry filter and slid on the brace
used vacuum and worked great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Foam Sleeve - 9058500
Reusable Dry Filter - 9010700
Collection Bag 3 PAK - 9066800
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Filters and Bag was damaged
Removed the old one's and replaced with the new one's.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Foam Sleeve - 9058500
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Replaced by hand only.
Worn out.
Replaced foam sleeve over vacuum housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Foam Sleeve - 9058500
Cartridge Filter - 9030400
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Needed a new filter and a foam sleeve.
Put the new filter on, and then the foam sleeve. Both parts missing on a used vacuum I bought.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Foam Sleeve - 9058500
Reusable Dry Filter - 9010700
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Missing filter and filter holding ring.
1. Opened the vaccum.
2. Installed the filter and the ring.
3. Closed the vaccum.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Foam Sleeve - 9058500
Cartridge Filter - 9030400
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The filter became wet and fell apart
Removed the old wet filter and replaced it with the new one for dry suction. Then used the foam sleeve for wet suction.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 4 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Foam Sleeve - 9058500
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Paper filter was ripped - replaced with a foam sleeve
1. Took it apart
2. Put sleeve in place
3. Put it back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy