Flavorizer Bars 70375

Description:

This is an Original Weber replacement parts used for some of their Grills. This set contains 4 Flavorizer Bars. The purpose of bars is to direct grease and drippings away from the burner tubes, which cuts down on flare ups tremendously. An extra benefit of Flavorizer Bars is that they help add that “cooked on a grill” flavor to your food. Bars rust is the combination of heat and moisture and should be replaced of they are damaged our have holes.

Frequently Purchased With

Main Burner Tu..
$55.85

Rod Style Grat..
$185.72

Thermometer
$31.59

Catch Pan Kit..
$38.66

Sear Burner Tu..
$55.24

Flavorizer Bar..
$86.52

Heat Shld/wate..
$106.22

Compatibility

This part is compatible with the following machines:

Weber

Expand the 150+ compatible machines

Repair Guides

Articles:

How to Replace the Ignitor Button on a Char-Broil Tru-Infrared Gas Grill

Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...

November 08, 2012

Repair Instructions: Submitted by Customers Like You

4 of 5 people found this instruction helpful

Tool Type:

Outdoor Grill

Parts Used:

Flavorizer Bars - 70375

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Rusted

Replaced old bars with the new one, easy, no tools needed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Outdoor Grill

Parts Used:

Hinge Pin/cotter Pin Kit - 70302

Flavorizer Bars - 70375

Main Burner Tube - 70306

Smoker Burner Tube - 70307

Sear Burner Tube Kit - 70865

Cookbox - 64845

Hardware For Cookbox - 60600

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Pliers, Socket set, Wrench Set

This was a weber Summitt repair. The cook box and everything inside

Removed all hardware in cook box, installed new cook box a and all parts inside.
A few problems but we worked them out

Only issue was wound up with 2 extra sets of flavor bar holders. The flavor bar holders were part of the cook box

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Outdoor Grill

Parts Used:

Flavorizer Bars - 70375

Main Burner Tube - 70306

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Power Drill, Nutdriver

Flames too high, even on low. Burner tubes' holes rusty.

The instructions come with the main burner tube, so don't feel like you need to follow these instructions. You may note that these look familiar if you have read others' instructions...they're the same. I also replaced my light switch at the same time.

-Disconnect propane from grill and open all control valves.
-Removed grill grates and rusty flavorizer bars.
-Used a steel brush installed in a drill to clean my grates, then oiled and seasoned them.
-Removed control knobs.
-Removed two screws to remove control knob panel to access manifold.
-Unplug light switch wires from battery.
-Remove existing light switch, insert new light switch.
-Removed two screws securing manifold and moved manifold to access burner tubes.
-Slid burner tubes out.
-Inserted new burner tubes.
-Screw in manifold using old screws.
-Reconnect propane.
-Test all burners. (they worked great!)
-Reinstall control knob panel using old screws.
-Install all control knobs.
-Install new flavorizer bars.
-Install existing grill grate.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Outdoor Grill

Parts Used:

Fixed Caster With Insert - 70359

Locking Caster With Insert - 70360

Flavorizer Bars - 70375

Main Burner Tube - 70306

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Nutdriver

Old age, parts worn and deteriorated

Removed the grates, drip pans, and trap. Removed the old flavorizer bars and dials. Removed the two manifold cover screws, removed the cover. Removed the manifold bolt, and pulled the manifold away. Removed the old burner tubes. Cleaned the drip areas, installed new burner tubes, reinstalled manifold, manifold cover, dials, installed new flavorizer bars, reinstalled grates.
Tested burners. Worked like new.
Placed one side of grill on milk crate, pulled old casters, reinstalled new, and repeated process for other side.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Outdoor Grill

Parts Used:

Flavorizer Bars - 70375

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Needed new flavorizer bars.

Removed the grates from the grill and cleaned them
Removed the old flavorizer bars and installed the new ones
Installed the grill grates

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Outdoor Grill

Parts Used:

Flavorizer Bars - 70375

Rod Style Grate, S.s. - 70372

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, No Tools Needed

Update grill and flavorer bars

1.Remove old parts
2. Brush and clean grill
3. Install flavorizer bars
4. Install new grill grates

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Outdoor Grill

Parts Used:

Flavorizer Bars - 70375

Main Burner Tube - 70306

Flavorizer Bar Brackets - 64850

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Wrench Set

Flavorizer bar and bracket was heavily rusted. Burner tubes worked but weren't performing well due to rust.

Disconnect propane from grill and open all control valves
Removed grill grates and flavorizer bars.
Removed control knobs
Removed two screws to remove control knob panel to access manifold
Removed two screws securing manifold and moved manifold to access burner tubes.
Slid burner tubes out
Removed two screws securing the front and back flavorizer bar brackets and removed brackets
Replaced with new brackets and screws (included)
Inserted new burner tubes
Screw in manifold using old screws
Reconnect propane
Test all burners
Reinstall control knob panel using old screws
Install all control knobs
Install new flavorizer bars
Install existing grill grate

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 2 people found this instruction helpful

Tool Type:

Outdoor Grill

Parts Used:

Flavorizer Bars - 70375

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, no tools required

Old flavorizer bars were corroded.

Simply removed the two cast iron grills and set aside, then lifted the flavorizer bars with my hand (no tools!) and dropped in the new ones.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

4 Reviews

Click to filter by ratings:

5 stars

3

4 stars

0

3 stars

1

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

As advertised. High quality product, expertly packaged and received shipment ahead of schedule.

Fit perfectly

Lloyd - June 9, 2023 Verified Purchase

Fits perfect.

Grill is like new again!

Guest - July 13, 2021 Verified Purchase

Perfect fit

Great quality. This item was a perfect fit for my weber s-670.

Leo - September 13, 2019 Verified Purchase

Parts were accurate but not enough of them

I confused as to why you sell half of what is needed. Grill required 8 bars you only sell a pack of 4. I had had to order a second to complete the job paying twice the S& H. I brief note that my grill requires 8 would have been helpful in advance.

Charles - August 24, 2021 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Flavorizer Bars