Flat Vacuum Belt (style 4 Or 5 RO-540310

Specifications

Belt Type: Flat
Style: Style 4
Quantity: Single

Description:

This is a genuine Dirt Devil upright vacuum belt. It fits vacuums that use a Style 4 or Style 5 belt. This is a flat belt which is used to transfer motion from the drive shaft to the brushroll. Th brushroll spins inside the suction nozzle in order to agitate the fibers of carpet or upholstery. This loosens dirt for a thorough clean. Note that the old belt may seem larger then the replacement belt because they get stretched out over time. One belt is included per package.

Compatibility

This part is compatible with the following machines:

Dirt Devil

Royal

RY5000 Commercial Lite
RY5200 Commercial Lite

UR30080 Quick Rewind Vacuum

Expand the 86 compatible machines

Products Compatibility

This item works with the following types of products:

• Vacuum

Repair Instructions: Submitted by Customers Like You

15 of 18 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Broken belt

Removed the old worn belt and attached the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

5 of 5 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Roller had belt melted.

Replaced the roller and put on the new belt. Runs fine.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

4 of 4 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

Hepa Filter Assembly - RO-JC0280

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Vacuum belt broke and filter was very dirty

Opened bottom of vacuum to access belt drives
Removed broken belt
Replaced new belt on drives
Closed bottom of vacuum with screws

Opened trash canister and cleaned inside
Replaced old used filter with new one

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

BRUSHROLL - RO-881080

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Motor was turning , the brush was not

Removed the nozzle guard and removed the old brush roll and broken belt.
Started the belt on the motor shaft then on the brush roll and stretched it into the base
Replace the nozzle guard

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Belt broke on vacuum

Removed the screws from the bottom plate and removed the brush roll and the broken belt.
Placed one end of the belt around the motor shaft and the other around the brush roll end
Pull the brush roll into the brackets and made sure it was secure. Then in stalled the bottom plate with the screws

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Belt that run the brush roller broken.

1. Took apart.
2. Replaced with the new belt.
3. Reassembled and tested.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

F59 Filter And Foam - RO-04707

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, none

dirty filter

Changed the filter

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

Repair Difficulty:

Medium

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

brush belt broke

remove screws
removed cover plate
inserted belt
put screws back in

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Vacuum

Parts Used:

Flat Vacuum Belt (style 4 Or 5 - RO-540310

Repair Difficulty:

Medium

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Vacuum belt broke.

Removed and replaced the roller/brush assembly.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 2 people found this instruction helpful

Tool Type:

Vacuum

Parts Used:

Bulb # 906 - RO-920167

Flat Vacuum Belt (style 4 Or 5 - RO-540310

Turbo Tool - FA-57015

Dirt Cup Latch Spring - 1881255000

Repair Difficulty:

Easy

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver

Hoses and unit clogged full of gunk

1 Took most all apart.
2 Washed all hoses with hot soapy water and rinsed and dried.
3 Replaced drive belt
4 Cleaned and lubricated motor and beater bar

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

4 Reviews

Click to filter by ratings:

5 stars

3

4 stars

1

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

dirt devil vacuum/estate sale bargain

Since I didn't know where the vacuum was originally sold, this was SO much easier to find parts than scouring the stores. Thank you for organizing by part number/serial model number! Worked great.

Guest - June 27, 2021 Verified Purchase

Correct Parts

Just what I needed and fast

Guest - February 4, 2020 Verified Purchase

just what I wanted

good quality, just what I wanted

Guest - October 19, 2019 Verified Purchase

work great

fit right the 1st time

Guest - May 28, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Flat Vacuum Belt (style 4 Or 5