Bearing-flange 941-0300

Frequently Purchased With

Compatibility

This part is compatible with the following machines:

MTD

319-550-092 (1989) Tiller
250-586-013 (93930) (1990) Edger
250-586-019/823-101 (1990) Edger
251-586-013 (93930) (1991) Edger
251-586-019/823-101 (1991) Edger
TMO-37960 (1991) Edger
240-586-000 (1990) Edger
586-046 (1990) Edger
251-586-000 (1991) Trimmer
315E610E000 (1995) Snow Blower
315E640F000 (1995) Snow Blower
315-611D000 (1995) Snow Blower
315-641E000 (1995) Snow Blower
315-661E118 (1995) Snow Blower
315E641E000 (1995) Snow Blower
315E660G000 (1995) Snow Blower
314-610E000 (1994) Snowblower
315E740F000 (1995) Snow Blower
314-612E000 (1994) Snowblower
314-640F000 (1994) Snowblower
314-642F000 (1994) Snowblower
313-610E000 (1993) Snowblower
314-660G000 (1994) Snowblower
313-612E000 (1993) Snowblower
313-640F000 (1993) Snowblower
313-642F000 (1993) Snowblower
313-660G000 (1993) Snowblower
312-612E000 (1992) Snowblower
312-640F000 (1992) Snowblower
312-642F000 (1992) Snowblower
312-660G000 (1992) Snowblower
312-610E000 (1992) Snowblower
311-450-000 (1991) Snowblower
311-550-000 (1991) Snowblower
311-440-000 (1991) Snowblower
311-550-118 SWC# 26274 (5/24) (1991) Snowblower
TMO-35253 (TMO-35253) (1991) Snowblower Parts
TMO-35254 (311-586-088) (1991) Snowblower Parts
240-550-000 (1990) Snowblower Parts
311-586-054 (484-1276) (1991) Snowblower
310-440-000 (1990) Snowblower Parts
310-450-000 (1990) Snowblower Parts
310-552-000 (1990) Snowblower Parts
310-588-000 (1990) Snowblower Parts
TMO-35253 (310-550-088) (1990) Snowblower Parts
TMO-35254 (310-586-088) (1990) Snowblower Parts
310-550-027 (414-367) (1990) Snowblower Parts
310-586-027 (356-915) (1990) Snowblower Parts
319-440-000 (1989) Snowblower Parts
319-450-000 (1989) Snowblower Parts
319-550-000 (1989) Snowblower Parts
319-552-000 (1989) Snowblower Parts
319-586-00 (1989) Snowblower Parts
319-588-000 (1989) Snowblower Parts
319-590-000 (1989) Snowblower Parts
450-206 (1989) Snowblower
450-327 (1989) Snowblower
550-327 (1989) Snowblower
550-206 (1989) Snowblower
550-352 (1989) Snowblower
552-206 (1989) Snowblower
586-327 (1989) Snowblower
586-206 (1989) Snowblower
586-352 (1989) Snowblower
318-552-000 (1988) Snowblower
318-440-000 (1988) Snowblower
318-586-000 (1988) Snowblower
318-450-000 (1988) Snowblower
318-588-000 (1988) Snowblower
318-550-000 (1988) Snowblower
550-054 (1988) Snowblower
550-098 (1988) Snowblower
550-105 (1988) Snowblower
550-118 (1988) Snowblower

Yard Man

315E753F401 (1995) Snowblower

315E633E401 (1995) Snowblower

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Edger
• Snowblower
• Trimmer

Repair Instructions: Submitted by Customers Like You

Tool Type:

Snowblower

Parts Used:

Bearing-flange - 941-0300

Housing:bearing - 05845C-0637

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Socket set

Bearings were worn

I removed the three self-taping screws from the flange, removed the flange and old bearing and replaced with new part and reinstalled the parts using the three original self-taping screws. I did apply grease to the bearing prior to installation.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Flat Washer - 736-0188

Flange Bushing - 741-0493C

Bearing-flange - 941-0300

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Socket set, Wrench Set, Nutdriver, Adjustable Wrench

worm gear key in the auger sheared, and flange bushing busted.

Removed the snow blower assy. from the mainframe, disassembled it, removed drive assembly from the blower and installed a new worm gear, reassembled that, reinstalled the augers on the shaft installed the new parts in the end supports, and completed reinstalling the auger assembly on the drive system. I followed the instructions that are in the owners manual for disassembly and repair. Also their is a video guide on You Tube that is helpful to watch.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Shear Bolt - 710-0890A

Bearing-flange - 941-0300

Bearing-sleeve - 941-0401

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Socket set

The reprair sleeves needed to be adjusted to fit my model

I used a hacksaw to make a cut a horizontal line to split the sleeve about 035 in width. The sleeves fit perfectly after and were ready for installation. We are good to go now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

1 Reviews

Click to filter by ratings:

5 stars

1

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

perfect fit

arrived on time and exactly as advertised

Fred - January 31, 2022 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Bearing-flange