Flame Tamer G527-0013-W1
Part Number: G527-0013-W1
Order within the next 42 minutes
and your part ships today!
and your part ships today!
Product Information
Description:
This flame tamer also known as heat tent is a genuine manufacturer approved replacement part. It is sourced directly from original manufacturer for use with gas grills. Heat tents help to direct grease and drippings away from the burner tubes. This will help to reduce flare ups tremendously. Grill parts will rust in combination of heat and moisture, that is why it is important to clean the grill after each use. Includes one (1) metal flame tamer per order. No tools needed to replace. |
Frequently Purchased With
Repair Guides
Articles:
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers for Flame Tamer
How long is this heat tent? Mine is a hair under 13 inches.
George
asked on 2022-10-05
Hello George, Thank you for the question. This Flame Tamer is 16.43" x 3.75". In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
eReplacementParts Team October 05, 2022
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
My grill was just worn out. Everything was 8 years old. Looked at buying a new grill, but for a third of the price I made mine like new.
I removed the old grates, infrared emitters,flame tamers, main burners, and thermometers. I used a putty knife and a shop-vac to clean everything up. The only tool I needed was a pair of pliers to pull the cotter keys off the burner tubes. When my new parts arrived, I had everything put back and ready to go in less than ten minutes. So happy I found this website. Being able to put my model number in and pick what I knew would be exact fit parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
The burner tubes were burnt out and falling apart
I took out all the old pieces and replaced them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools needed
Flame tamers burnt out
Opened grill top lid. Removed cooking grates and cooking grate infrared emitters. Removed old flame tamers ( they all lift out) install new flame tamers then cooking grates.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Flame Tamer rusted out and wouldn't distribute flame heat evenly any longer.
1. Removed grates and emitters from infrared grill.
2. Removed rusted/broken flame tamers.
3. Inserted tamers into slots.
4. Replaced emitters and grates.
2. Removed rusted/broken flame tamers.
3. Inserted tamers into slots.
4. Replaced emitters and grates.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
flame difusers were wore out
took old ones out and put new ones in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Old parts had rusted through
Removed and cleaned cast iron grills; removed badly rusted flame tamer and infrared emitter and cleaned grill inside...installed new parts (impressed with the quality of infrared emitter parts...solid)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Parts were rusted out and needed replaced.
Took the old parts out dropped the new parts in and ready to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver, Hammer, shop-vac , wire brush, Awl
Burners rotted out
Remove old parts
Vacuum and glean inside of grill
Install new parts.
20 minutes to remove old parts
20 minutes to install new parts
10 minutes to clean up the mess..
Easy job. Grill like new
Vacuum and glean inside of grill
Install new parts.
20 minutes to remove old parts
20 minutes to install new parts
10 minutes to clean up the mess..
Easy job. Grill like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Burners and flame tamer worn out.
Very simple. Everything comes apart really easy. Hardest was reattaching igniters. Tools about 2 minutes total. Works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers
Multiple parts were rusted/corroded causing uneven heating.
I removed all burners, carryover tubes, flame tamers and emitter grates. They were held place with simple cotter pins. I cleaned out the fire box thoroughly. Then I installed all replacement parts. All the parts I ordered came with the necessary cotter pins. Some of the cotter pins were very rusty and broke when I tried to remove them. I was able to remove broken pieces with a punch and a small hammer. I actually had several left over. Now my grill works perfectly. It heats very evenly and and cooks like it is new. The process was easy. I was skeptical at first, but when I began to remove the old parts and realized how easily they came out I new I had done the right thing. I saved myself a lot of money repairing the grill instead of buying a new one. My wife was thrilled as well...
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
7 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Perfect
Easy to replace.
Guest -
November 24, 2021
Verified Purchase
Excellent
Cant say enough about the amount of information on website, availability, delivery quickness. I love trading with these people.
Guest -
June 25, 2020
Verified Purchase
Grill parts
All parts ordered fit as designed.
Guest -
October 21, 2019
Verified Purchase
Easy fix
Parts arrived super quick and were easy to replace. Very satisfied.
Guest -
October 9, 2019
Verified Purchase
Exactly what I needed
Delivered promptly. Correct part. Easy to navigate website.
Guest -
July 27, 2019
Verified Purchase
PERFECT replacement
Flame tamer fit just like new
Guest -
June 1, 2019
Verified Purchase
Easy ordering system, quick delivery, arrived in good condition.
All parts I ordered were exactly what I needed.
Guest -
September 30, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
Repair Guides
Articles:
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|