866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Grill Parts  Weber Parts  70359 Fixed Caster With Insert

Fixed Caster With Insert

Part Number: 70359
Weber
Availability: 25+ in stock
Price: $26.22
Quantity:
Ships within 1 business day
Description:
This is a genuine manufacturer sourced locking caster with insert designed for use with Weber grills. This is a plastic part with a metal shaft. This caster wheel helps you keep your unit mobile for easy transportation. Please note, this particular caster does not have a locking mechanism to keep the grill steady. No tools are needed to complete this repair, simply insert the caster in place of the old one.
Product Information
Manufacturer: Weber
Product Number: 70359
Classification: Part
Weight: 0.66 lbs.
Shipping: Ships Worldwide
Repair Guides
Watch the Repair Video for Fixed Caster With Insert
How to Replace the Fixed Casters on a Weber Grill
Articles:
How to Replace the Ignitor Button on a Char-Broil Tru-Infrared Gas Grill
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
How to Replace the Fixed Casters on a Weber Grill
Step-by-step instructions show you how to remove and install the fixed casters on your Weber grill....
August 28, 2017
Related Products
Questions & Answers

I'm looking at the caster inserts for my grill. (WEB70359 and WEB70360) I'm assuming based on the description that they are sold separately, not in pairs. Is this a correct assumption?
John for model number Weber Summit 2780001
Hi John, yes this is correct, they are sold separately. Thank you for your question and good luck with your repair!
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, RUBBER MALLET
HAD TO REPLACE ALL 4 WHEELS ON MY GRILL
I REMOVED ALL PARTS FROM INSIDE OF GRILL THEN LAID GRILL ON ITS BACK.
USED A SCREW DRIVER TO EJECT THE OLD INSERT HOLDING THE CASTER.
I INSTALLED THE NEW INSERT AND TAPPED IT IN WITH A RUBBER MALLET.
I THEN SLID THE NEW CASTER INTO THE NEW INSERT. JOB DONE!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools were needed for this
Replacing caster wheels on a outdoor Weber gas grill.
The easiest way is to lay your grill on its back, then you can easily access the caster wheels. First disconnect the propane tank and remove it from the grill. Then remove the grilles, dripping pan, and everything that might fall off when you lay it on its back.
Once it's laying down remove the old caster wheels by simply wiggling it while pulling out steady. you don't need any tools. They will slowly but surely come off one by one. Then just push the new caster wheels in until they snap in place. And that's all :).
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, hammer
Wheels rotted
Propped up the grill one side at a time took the old wheels put the new ones on. Take out the tank first.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Rubber mallet
Rubber/plastic casters deteriorated.
The instructions say to block up the grill. However being I had everything removed from the grill ( propane tank, grate, tray, etc.) for a thorough cleaning, I just had my wife tilt the grill so that I could have access to the legs so as to replace the casters. With a rubber mallet gently hammered in the plastic inserts and then pushed in the casters by hand pressure.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Hammer
Old wheels were disintegrating.
1. Follow the directions!
2. With help, and after removing the inside grills and flavorizers, we laid the grill down on an old blanket.
3. Remove the old wheels by pulling on them. Two of them came out with their plastic insert. If the insert remained, use a medium sized flat head screwdriver to pry it down so I could grab it with my fingers or pliers.
4. Inserted the new inserts and gently used a hammer to seat them.
5. Inserted the new wheels.
6. Lighted the grill and they worked perfectly!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts worn from use
Systematically took the grill apart, replaced the parts and reassembled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Grill is 10 years old and the rubber on the wheels was shot.
Elevated one side of the grill at a time and knocked the old wheels off and replaced them with the new ones.


Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Rubber mallet
Outdoor grill wheels cracked and not usable could not move grill
Used a screwdriver to pry out old wheels and inserts, inserted the new insert first and tapped in new wheel with a rubber mallet. Very easy project done in 15/20 minutes, plus good directions.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Rubber hammer
Original caster would not stay in insert
Removed old insert, installed new insert, put new caster in and was done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Fixed Caster With Insert - 70359
Locking Caster With Insert - 70360
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Hammer
Casters worn
Removed the old insets with a screwdriver and hammer, then just pressed the new casters in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Perfect match!
    I needed replacement casters for my Weber grill and these were a perfect match. A little pricey, but worth it for the match.
    Guest - 1 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy