Product Information
| Manufacturer: Oster Pro |
| Product Number: 84936000000 |
| Classification: Part |
| Weight: 0.20 lbs. |
| Shipping: Ships Worldwide |
Description:
| This authentic item is supplied directly from the original equipment manufacturer for use with Oster Pro hair clippers. The field assembly attaches to the armature. When replacing this part a screwdriver might be required during the installation process. It is made out of durable materials and will need to be replaced if it breaks. This item is sold individually. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Hair Clipper
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Hair Clipper
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pressure clip pliers
Unit slowed down
1. Removed end cap screws
2. Removed end cap
3.removed pressure clip
4.removed brushes & brush caps
5. Pulled armature & field assembly out and separated
6 put new field assembly on armature
7.insert in housing
8.replace pressure spring and end cap
9.replace brushes & brush caps
2. Removed end cap
3.removed pressure clip
4.removed brushes & brush caps
5. Pulled armature & field assembly out and separated
6 put new field assembly on armature
7.insert in housing
8.replace pressure spring and end cap
9.replace brushes & brush caps
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Wrench Set
Would not tuen on
Replaces field assembly.
Took a little while to take it apart (afraid might break it with bigger hammer)
Has to reassemble twice?
Still had to adjust the two leaf springs to make correct contact
Took a little while to take it apart (afraid might break it with bigger hammer)
Has to reassemble twice?
Still had to adjust the two leaf springs to make correct contact
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Clipper was making a squealing sound
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
| Manufacturer: Oster Pro |
| Product Number: 84936000000 |
| Classification: Part |
| Weight: 0.20 lbs. |
| Shipping: Ships Worldwide |
