Medium
1-2 hours
This field assembly is an authentic replacement part sourced from the original manufacturer for use with Makita table saws. The field is one of two main parts of an electric motor. The field is a tube with magnets lining the inside, and it houses the armature. When the field is powered it creates a magnetic field allowing the armature to spin creating physical energy. The field can be overheated if the saw is overloaded. The wires in the field can burn causing a short. It is recommended to inspect the armature when servicing the field, because damage to the field can cause damage to the armature. The field is sold individually.
Field Assembly 115v 596181-1
OEM part for: Makita
Part Number: 596181-1
$105.79
In Stock
Order within the next 10 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 10 machines
Makita
2703 Table Saw View Diagrams & Manuals
2702 Table Saw View Diagrams & Manuals
2704 Table Saw View Diagrams & Manuals
2704X1 10" Table Saw View Diagrams & Manuals
2703X1 15A 10" Table Saw View Diagrams & Manuals
2705 10 in. Contractor Table Saw View Diagrams & Manuals
2705X1 10" Contractor Table Saw with Stand View Diagrams & Manuals
2703 (Type 1) Saw View Diagrams & Manuals
2703 (Type 2) Saw View Diagrams & Manuals
2704 (Type 2) Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Item arrived quickly with everything needed
It was basically everything needed for a Mikita table saw motor replacement. The parts went it perfectly and the saw was up and running after about 30 minutes effort. I’ll order from eReplacments again.
Guest -
May 10, 2022
Verified Purchase
very easy repair
o changed this part along with a stator and I think I completed it in 30 minutes. very easy.
mike -
June 25, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Field Assembly 115v
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Did not run
Steven - May 15, 2017
👍 3 of 3 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Rubber mallet
Turned the table saw upside down. Removed the motor from the gear housing. Removed the brushes from the motor. Pulled the armature from out of the motor housing. Removed the baffle plate. Removed the screws hold the field. Removed the springs from around the brush holders, noting which color, went to each brush holder. Made a wiring diagram of the rest of the wires and disconnected them. Used a rubber mallet to tap on the outside of the motor housing to release the field. Reassembled in reverse order. And installed the new brushes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
table saw stator and field assembly shorted out due to too small of extension cord used and heavy load on saw.
mike - June 27, 2019
Tool Type
Table Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill
1.watched ereplacement video on removing the stator
2.disassembled the motor
3.unclipped brush coils off the field assembly
4.installed field assembly coils over brush housing
5.reclipped brush coil wiring to field assembly
6.installed field assembly and stator
reconnected field assembly wiring with new pinch connectors on side of motor housing
7.reinstalled motor housing bolts
8.turned saw back on
it would be helpful if you created a video for installing the field assembly like you did the stator
2.disassembled the motor
3.unclipped brush coils off the field assembly
4.installed field assembly coils over brush housing
5.reclipped brush coil wiring to field assembly
6.installed field assembly and stator
reconnected field assembly wiring with new pinch connectors on side of motor housing
7.reinstalled motor housing bolts
8.turned saw back on
it would be helpful if you created a video for installing the field assembly like you did the stator
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
