Easy
15-30 minutes
This is a genuine Breville replacement felt washer which is supplied directly from original equipment manufacturer. It is specially designed for a espresso machine. Washer helps to distribute the pressure evenly over the surface of connected parts. It is made out of felt material and it is sold individually.
Felt Washer SP0001575
OEM part for: Breville
Part Number: SP0001575
$7.41
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 1 machine
Breville
BES870XL The Barista Express View Diagrams & Manuals
This item works with the following types of products:
- Espresso Parts
This part replaces obsolete part #: SP0001803, BES870XL/06.29, BES870XL06.29
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
9
4 stars
0
3 stars
1
2 stars
1
1 stars
2
< PREV
- 1
- 2
easy to use and find part on this website.
Fast effective and efficient! Delivery cost outrageous and long. Other than that the part is as was shown on site, so because of the delivery very high charges this will be a last restore source i will use for my needs. God bless and my his peace and grace follow you always. BCH Sisk
Guest -
November 15, 2022
Verified Purchase
Needed part just right.
The only place I can find this part is with you. The original has the fit.
Nancy -
September 30, 2022
Verified Purchase
Perfect fit
I had my coffee machine ready for the installation, took me 5 minutes to make my first espresso coffee. Thanks
Guest -
August 21, 2022
Verified Purchase
Easy repair
I needed this washer because I clean the grind assembly and the washer has to be changed. The felt is always ruined.
Guest -
January 29, 2022
Verified Purchase
The right part for my machine
Factory replacement part worked great. My only complaint would be the slow response that erplacementparts provided. I have ordered from them in the past and still like their selection of parts but sometimes the service is slow.
Benjamin -
December 6, 2021
Verified Purchase
I finally got it
It took awhile but I finally got the part I needed. Ersplacements sent me emails to let me know the progress of my order. I appreciate that.
Guest -
August 11, 2021
Verified Purchase
Hard part to find but these guys had it!
Easy and on time. A Pleasure.
Guest -
February 14, 2020
Verified Purchase
Washer for espresso machine
Arrived quickly thanks again.
Rafael -
December 26, 2019
Verified Purchase
Fits Breville Smart Grinder Pro
Perfect fit, goes in the shaft under the impeller.
JOHN -
August 29, 2019
Verified Purchase
Replacement washer
Ordered 6 felt washers. One came torn inside the plastic bag. The other 5 are fine. Used one in my Breville Barista coffee grinder. Works great again.
Guest -
October 18, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Felt Washer
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The original part was worn out and that affected the grinding precission
Doron - June 9, 2016
👍 9 of 10 people found this instruction helpful
Tool Type
Espresso
Difficulty
Medium
Time
15-30 minutes
Tools Used
Socket set
Parts Used
Empty and clean the grinder. Replace the felt washer, and reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Felt washer broke when cleaning out a Breville BCG820BSSXL coffee grinder jam
Stuart - August 9, 2017
👍 7 of 7 people found this instruction helpful
Tool Type
Espresso
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench
Parts Used
This grinder will jam if the coffee discharge chute is blocked - it was because someone put the grind jar in backwards... The felt washer under the impeller is very fragile and broke when cleaning out the discharge chute. This felt washer is not available on the Breville web site. eReplacementParts.com showed a similar washer SP0001575 but for a different Breville coffee grinder/brewer. I took a chance that it would fit assuming that Breville does not make many of these grinders. it fit just fine! BTW - I bought 2 just in case it happens again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
While cleaning the grinder for the first time I did not realize that there were small parts below the hollowed grind fan part of the system & accidentally sucked them up with my vac.
Barry - November 24, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Espresso
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, Vaccumn
Simple Job
1. Again removed the grinder hopper
2. Vac.'d out & fully cleaned burr
3. Unscrewed all parts as previously done.
4.Finished cleaning again.
5. Replaced missing parts as indicated in your drawings
6. Reassembled unit.
7. First test of repair proved REPAIR & PARTS WORKED PERFECTLY.
I could not have done, or even found the right parts, without your great drawings. You have my undying thanks for that.
I was very happy with your service and should the need arise I will do so again.
1. Again removed the grinder hopper
2. Vac.'d out & fully cleaned burr
3. Unscrewed all parts as previously done.
4.Finished cleaning again.
5. Replaced missing parts as indicated in your drawings
6. Reassembled unit.
7. First test of repair proved REPAIR & PARTS WORKED PERFECTLY.
I could not have done, or even found the right parts, without your great drawings. You have my undying thanks for that.
I was very happy with your service and should the need arise I will do so again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dennis - July 1, 2018
👍 2 of 3 people found this instruction helpful
Tool Type
Espresso
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Pocket knife
Parts Used
Took grinder apart
Washer was broken, so ordered another.
Replaced washer, cleaned grinder.
Removed small pebble that was about the size of one-half coffee bean.
Put machine back together and enjoyed a latte.
Washer was broken, so ordered another.
Replaced washer, cleaned grinder.
Removed small pebble that was about the size of one-half coffee bean.
Put machine back together and enjoyed a latte.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Felt washer in coffee grinder broke
Claire - October 28, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Espresso
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Adjustable Wrench
Parts Used
1. Dismantled coffee grinder according to manufacturer's instructions
2. Removed old felt washer
3. Put in new felt washer
4. Re-assembled coffee grinder according to manual
2. Removed old felt washer
3. Put in new felt washer
4. Re-assembled coffee grinder according to manual
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Setting for amount of coffee ground needed to be close to maximum
Juergen - July 8, 2023
Tool Type
Espresso
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Adjustable Wrench
1. Removed hopper
2. Vacuumed out grinder assembly
3. Unlocked and removed outer grinder
4. Removed cap nut that's holding inner grinder, then removed inner grinder
5. Removed washers
6. Removed grind fan assembly
7. Replaced felt washer
8. Inserted grind fan assembly
9. Put replacement washers back in place
10. Put cap nut back in place and tightened nut
11. Put replacement outer grinder back in place and locked it in place
12. Checked distance between outer and inner grinder, factory setting of 5 was adequate (minimal to none metal grinding noticable
13. Put bean hopper back in place
14. Adjusted grind of beans
15. Adjusted setting for amount of coffee ground
-> now the setting is a little below 1/4 - >-> like new!
2. Vacuumed out grinder assembly
3. Unlocked and removed outer grinder
4. Removed cap nut that's holding inner grinder, then removed inner grinder
5. Removed washers
6. Removed grind fan assembly
7. Replaced felt washer
8. Inserted grind fan assembly
9. Put replacement washers back in place
10. Put cap nut back in place and tightened nut
11. Put replacement outer grinder back in place and locked it in place
12. Checked distance between outer and inner grinder, factory setting of 5 was adequate (minimal to none metal grinding noticable
13. Put bean hopper back in place
14. Adjusted grind of beans
15. Adjusted setting for amount of coffee ground
-> now the setting is a little below 1/4 - >-> like new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burr needed cleaning.
Nancy - October 2, 2022
Tool Type
Espresso
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
1.Removed the top nut.
2. Removed the washers and outer burr.
3. Removed the inner burr and felt washer.
4 After cleaning all, put in new felt washer and all the parts in place.
5. Test the grinding of coffee and drink a well deserved expresso.
2. Removed the washers and outer burr.
3. Removed the inner burr and felt washer.
4 After cleaning all, put in new felt washer and all the parts in place.
5. Test the grinding of coffee and drink a well deserved expresso.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
When cleaning, I found the ruined felt washer under the grind fan.
Nancy - November 13, 2020
Tool Type
Espresso
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
1. I removed the nut, the washers and the inner burr.
2. After, the grind fan was removed.
3. The felt washer was taken out and replaced with the new washer.
4. The grind fan was replaced, then the inner burr, the spring and flat washers, and last, the nut.
5. An expresso was prepared to test the coffee grinder. It passed the test.
2. After, the grind fan was removed.
3. The felt washer was taken out and replaced with the new washer.
4. The grind fan was replaced, then the inner burr, the spring and flat washers, and last, the nut.
5. An expresso was prepared to test the coffee grinder. It passed the test.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
