Easy
15-30 minutes
Genuine Hitachi replacement part, this item is sold individually. The purpose of the 877-761 Feeder Spring is to return the feeder to its original position once a fastener has been shot. This part is made of metal and is compatible with the nailers listed below. For install: remove the retaining ring from the feeder shaft. Slide the feeder with feeder spring off of the shaft. The old spring can now be removed and the new one set in place. Slide the feeder with spring back onto the feeder shaft and secure with the retaining ring.
Feeder Spring 877761
OEM part for: Metabo HPT (Hitachi)
Part Number: 877761
$3.99
In Stock
Order within the next 6 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 12 machines
Metabo HPT (Hitachi)
NV45AB2 Side Load Coil Roofing Nailer View Diagrams & Manuals
NV45AB2(S) Bottom Load Coil Roofing Nailer View Diagrams & Manuals
NV45AE 1-3/4" Side Load Coil Roofing Nailer View Diagrams & Manuals
NV50A1 Light-Duty Coil Utility Nailer View Diagrams & Manuals
NV50AP2 Full Round Head, Coil, Wire Collation Pasti-Tacker Plus View Diagrams & Manuals
NV45AA Heavy Duty Coil Nailer View Diagrams & Manuals
NV45AB 1-3/4" Heavy Duty, Roofing Coil Nailer View Diagrams & Manuals
NV45AB2M 1 3/4 Inch Roofing Coil Nailer Side Load Magazine (Wire Collation) View Diagrams & Manuals
NV50A1M 2 Inch Utility Coil Nailer (Wire Collation) View Diagrams & Manuals
NV45AB3 Nailer View Diagrams & Manuals
NV45AES Nailer View Diagrams & Manuals
NV50AP Nailer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Nailer Parts
- Stapler Parts
This part replaces obsolete part #: 877474
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
1
3 stars
0
2 stars
1
1 stars
0
< PREV
- 1
Parts
Your service was affordable and received what we needed quickly!
Guest -
August 30, 2019
Verified Purchase
Bueno y entrega segura
Llegó a tiempo y era lo que necesitaba
Guest -
April 19, 2022
Verified Purchase
Offers are bogus
Was given a 10% off offer but the offer is all I really got. Didn't take the 10% off at chechout like it was supposed to.
carl -
March 10, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Feeder Spring
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
driver not returning,nails not feeding
Robert - January 9, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, allen wrenches,hammer.punch
1 remove head cap to replace driver o-ring. 2 remove nose piece to replace bumper sheet. 3 remove guard and pin to replace feeder spring.4 replace guard
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Skipping nails,only shooting 50-60%
David - October 15, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Allen wrench
Parts Used
Removed two allen bolts and metal cover over feed mechanism,removed o-ring on shaft or pivot pin, pulled out removed broken spring cleaned up parts, replaced spring, shaft and retaining o-ring, lubricated, reassembled cover with bolts. Test fired, shooting 100%
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Feeder didn't work
Jared - October 22, 2017
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Adjustable Wrench, Allen wrench
Parts Used
Took it apart put new parts in, works great
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Unable to fully drive nails.
Jesse - May 13, 2017
Tool Type
Nailer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Allen wrenches, roll pin punch, mallet, gasket scraper
1. Took the gun apart.
2.Cleaned all parts.
3. Assembled with the new parts.
2.Cleaned all parts.
3. Assembled with the new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Roofing nail gun was bought at pawn shop and had parts missing.
Sam - December 8, 2016
Tool Type
Nailer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Allen wrench, awl
REPLACE LEAKING O-RING
(1) I removed the 4 hex screws holding the piston cap
(2) Removed cap
(3) Turned nailer upside down and shook out the plunger
(4) Removed worn O-ring, I used an awl to pry the ring off
(5) Replaced with new O-ring
(6) Slide piston back into nailer making sure to line up the blade with the hole. NOTE: The blade will only fit one way.
(6) Reinstalled piston cap
(7) Tightened down 4 hex screws
INSTALL MISSING PARTS
(1) Installed Feeder Spring using hinge pin and retainer
(2) Installed Guard and replaced the missing 2 hex screws
(1) I removed the 4 hex screws holding the piston cap
(2) Removed cap
(3) Turned nailer upside down and shook out the plunger
(4) Removed worn O-ring, I used an awl to pry the ring off
(5) Replaced with new O-ring
(6) Slide piston back into nailer making sure to line up the blade with the hole. NOTE: The blade will only fit one way.
(6) Reinstalled piston cap
(7) Tightened down 4 hex screws
INSTALL MISSING PARTS
(1) Installed Feeder Spring using hinge pin and retainer
(2) Installed Guard and replaced the missing 2 hex screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nails not feeding through, intermittent nailing.
Richard - October 15, 2016
Tool Type
Nailer
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Allen wrench
Parts Used
Removed housing to feeder assembly with alien wrench. Removed rubber ring from feeder spring pin. Removed feeder spring and pin. Reinstalled in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nail guns were not feeding nails, one had an inlet broken
luis - March 26, 2016
Tool Type
Nailer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, paint brush, degreser
I began by decreasing the nailer, remove protective plate, removed rubber O ring to remove feeder spring, I slide pin out, I also remover the trigger spring to remove the pressure against.
removed feeder spring, and installed the new one, I put everything together the opposite order as I started, I tested them, (because I fixed 3 of them, and they all worked as new. I'm happy.
removed feeder spring, and installed the new one, I put everything together the opposite order as I started, I tested them, (because I fixed 3 of them, and they all worked as new. I'm happy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
