Product Information
Description:
This is an authentic Echo replacement part, sourced from the original manufacturer for use with gas-powered blowers. The plastic fan fits inside the blower housing and is driven by the output shaft to create the wind that is sent through the tubes. This item is available as an individual replacement part. |
Compatibility
This part is compatible with the following machines:
the 8 compatible machines
Products Compatibility
This item works with the following types of products:
- • Vacuum
Questions & Answers for Fan-blower
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Chipper Shredder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Nutdriver, brush for cleaning, compressor for ultimate cleaning
fractured fan/vac housing
disassemble fan/vac front/outside housing
remove safety switch & wiring
remove fan blade
clean with brush & compressor
install fan blade
install safety switch & wiring
install & secure new fan/vac housing
spent 10% of the cost of a new vac/blower on needed parts
up and running like it was new
remove safety switch & wiring
remove fan blade
clean with brush & compressor
install fan blade
install safety switch & wiring
install & secure new fan/vac housing
spent 10% of the cost of a new vac/blower on needed parts
up and running like it was new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chipper Shredder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers, Socket set
Fan blades where broken off in places.
Very easy repair on the Echo es 231 shredder/ blower. Unscrew the cover, use a socket and pliers to hold blade. Then remove the fan. Put a little bit of blue loctite on the bolt. Install the cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information