eReplacementParts.com
877-346-4814
Tanaka Parts
Repair Parts Home
  
Power Tool Parts
  
Tanaka Parts
  6690364 Element-cleaner

Element-cleaner 6690364

OEM part for: Tanaka

Part Number: 6690364


Install
Videos!
Element-cleaner - 6690364:Tanaka 360 View
Element-cleaner - 6690364:TanakaElement-cleaner - 6690364:TanakaElement-cleaner - 6690364:Tanaka 360 View
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Easy 15-30 minutes (5 rated repairs)?
OEM: Original Equipment Manufacturer ?
Tanaka
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine OEM sourced element-cleaner designed for Tanaka gas powered equipment. It is used to filter out dust and other contaminants from going into the engine. Please note, this foam element-cleaner is sold individually.

To replace this filter you should only need a screwdriver.

• Make sure to disconnect the spark plug
• Remove the cover screw
• Take off the cover and replace the filter element
• Reassemble and test the unit

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 20 machines

Tanaka

TED-210 Gas Drill View Diagrams & Manuals
TED-210C (T277487-T2848900) Gas Drill View Diagrams & Manuals
TED-210C (U205952-U268935) Gas Drill View Diagrams & Manuals
HTD-2520PF Hedge Trimmer View Diagrams & Manuals
HTD-2522PF (C230891) 22" Hedge Trimmer View Diagrams & Manuals
HTD-2522PF (C230890) 22" Hedge Trimmer View Diagrams & Manuals
HTD-2526PF 26" Hedge Trimmer View Diagrams & Manuals
HTD-2530PF Low Emission 30" Hedge Trimmer View Diagrams & Manuals
THT-210 Hedge Trimmer View Diagrams & Manuals
THT-2100 Hedge Trimmer View Diagrams & Manuals
THT-210S Hedge Trimmer View Diagrams & Manuals
THT-2120 Hedge Trimmer View Diagrams & Manuals
THT-240 Hedge Trimmer View Diagrams & Manuals
THT-2510 30" Hedge Trimmer View Diagrams & Manuals
THT-2520 30" Hedge Trimmer View Diagrams & Manuals
THT-2530 30" 24cc 1.3HP Single Sided Hedge Trimmer View Diagrams & Manuals
THT-2540 40" 24cc 1.3HP Single Sided Hedge Trimmer View Diagrams & Manuals
TCP-210 Centrifugal Pump View Diagrams & Manuals
THT-210SA Hedge Trimmer View Diagrams & Manuals
HTS-2530PF 24cc, 30" Single-sided Blades, Hedge Trimmer View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Drill Parts
  • Hedge Trimmer Parts
  • Trimmer Parts
  • Pump Parts

This part replaces obsolete part #: 4460650021, 669034, 4460650020

Customer Part Reviews ?

5
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Original part for Tanaka TED-210.
    We appreciate great full that can buy the original part after so many years (around 1990). We changed the old element-cleaner on Tanaka TED-210.
    iGlobal - February 25, 2022 Verified Purchase
    The part is just what I needed!
    Whenever I do any repairs on my lawn equipment I always go to the Ereplacement for my parts you can’t go wrong!
    John - September 13, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Element-cleaner


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (5 rated repairs)?

    wouldnot run

    James - October 23, 2022
    Tool Type

    Hedge Trimmer

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Socket set, Nutdriver

    1. removed air cleaner
    removed fuel lines to primer
    removed carburetor
    removed throttle linkage
    cleaned carb mounting area
    reassembled in the opposite format
    primed then stared
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Gas leak

    Michael - July 11, 2020
    Tool Type

    Hedge Trimmer

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    1. Removed filter cover
    2. Removed old filter
    3. Removed filter assembly.
    4. Removed old fuel line.
    5. Replaced fuel line.
    6. Reassembled filter assembly
    7. Replaced filter.
    8. Attached cover
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Would only run on full choke

    Roger - May 22, 2017
    Tool Type

    Hedge Trimmer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, Homemade retrieving wire

    Replaced the air filter and the gas filter. But it was necessary to have a tech. Rebuild the carburetor. Runs fine now!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The air filter had disintegrated and needed to be replaced.

    Scott - April 25, 2016
    Tool Type

    Hedge Trimmer

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove air filter cover, then the old filter, clean out area, then insert the new filter and replace the air filter cover.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Carburetor stopped up, fuel lines rotten ,fuel filter bad ,primer pump bad & air filter rotten. The hedge trimmer had not been cranked in 10 years

    Hurbert - December 28, 2015
    Tool Type

    Hedge Trimmer

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Wire with hook on one end

    Removed carburetor to a access fuel lines & primer pump, used wire with hook to remove the fuel filter. I replaced the fuel line fuel filter & primer pump. Then I dissembled the carburetor cleaned it in my ultrasonic cleaner resembled, reinstalled, checked the compression 110 lb. cranked it up it ran fine, oiled the blade.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal