Filter-pre Cleaner 271466

Specifications

Part Type: Air Filter

Description:

This is an OEM approved replacement part designed for gas trimmers/brush cutters. Its purpose is to filter out dust and debris from the air that goes into the unit. Over time it will get dirty and clogged restricting the airflow eventually requiring replacement. Please note this high quality foam air cleaner element is sold individually.

Frequently Purchased With

Filter-a/c Car..
$14.55

Gasket-fuel Ta..
$5.10

Filter-a/c Car..
$18.12

Diaphragm-carb..
$3.99

Gasket-air Cle..
$3.99

Gasket-intake..
$4.99

Grommet
$5.34

Compatibility

This part is compatible with the following machines:

Briggs and Stratton

Toro

62924 (7900001-7999999)(1997) Blower-Vacuum
62924 (7900001-7999999)(1997) Blower-Vacuum
62924 (8900001-8999999)(1998) Blower-Vacuum
62924 (8900001-8999999)(1998) Blower-Vacuum
62924 (9900001-9999999)(1999) Blower-Vacuum
62924 (9900001-9999999)(1999) Blower-Vacuum
62924 (200000001-200999999)(2000) Blower-Vacuum
62924 (200000001-200999999)(2000) Blower-Vacuum
62912 (0000001-0999999)(1990) Blower-Vacuum
62912 (0000001-0999999)(1990) Blower-Vacuum
62912 (1000001-1999999)(1991) Blower-Vacuum
62912 (1000001-1999999)(1991) Blower-Vacuum
62912 (2000001-2999999)(1992) Blower-Vacuum
62912 (2000001-2999999)(1992) Blower-Vacuum

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Blower
• Engine
• Vacuum

Repair Instructions: Submitted by Customers Like You

Tool Type:

Engine

Parts Used:

Filter-pre Cleaner - 271466

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

filter bad

put new filter in

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Filter-pre Cleaner - 271466

Gasket-fuel Tank - 272409S

Filter-a/c Cartridge - 396424S

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Gasket scraper

tiller would not stay running

Pick up tube fell off bottom of carburetor into the fuel tank. Removed fuel tank, secured the original pick up tube and reinstalled fuel tank. Not as easy as it sounds considering I did not remove carburetor because the mounting bolts were stripped. Tiller is 20years old.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Spring-rewind Str - 490179

Gasket-intake - 273113S

Kit-carb Overhaul - 495606

Diaphragm-carburetor - 272538S

Tube-pick Up - 391813

Filter-pre Cleaner - 271466

Gasket-intake - 27355S

Screw - 94025

Gasket-fuel Tank - 272409S

Filter-a/c Cartridge - 396424S

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Power Drill, Socket set, Wrench Set, Scaler, welder, die grinder with a cutoff wheel, hammer

Chipper was left with ethanol fuel and rotted the bottom of the fuel tank out and left the carb full of yellow “sand”. The rewind spring was broken, the engine would not turn over, as it turned ou

Removed the fuel tank and carb cleaned the carb and installed the rebuild kit. I cut the damaged metal out of the fuel tank, cleaned the rust out of the rest of the tank with a needle scaler and welded a new bottom onto the tank. Next I pulled the blower housing off and replaced the rewind spring. After that I pulled the housing off the chipper, took the flails apart and freed them up, cleaned the mouse nest out, gave everything a coat of paint.
Now I have a good chipper that starts on the second pull that I saved from going to the dump for very little money.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Grommet - 692189

Filter-pre Cleaner - 271466

Filter-a/c Cartridge - 396424S

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Air filter cartridge dirty, air cleaner element and breather tube grommet missing

Replaced air cleaner cartridge
Installed air cleaner element
Installed breather tube grommet

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Filter-pre Cleaner - 271466

Stud-air Cleaner - 231176

Base-air Cleaner - 691735

Filter-a/c Cartridge - 396424S

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers, Power Drill, Socket set, Wrench Set, drill bit & easout

Routine maintenances and broken air cleaner Stud

Pulled carb. So as not to get metal shavings in engine, when drilling out broken stud. Use easy out to remove broken air cleaner stud. Replace carb. install new parts. Simple

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Engine

Parts Used:

Filter-pre Cleaner - 271466

Gasket-cylinder Head - 272157S

Filter-a/c Cartridge - 396424S

Plug-spark - 796112S

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set, Torque Wrench

Blown head gasket on 5 hp walk behind blower

Had to figure out the torque spec on a Briggs 5 hp, horizontal shaft engine but did a little internet searching and found it.

Remove the existing motor head carefully to ensure that the bolts were tracked for reassembly and not lost. Scrapped the existing gasket material from the head and the motor housing. Took a little time to wire wheel carbon from the piston and valves. Put the new gasket on the head and reassembled. Torqued it down to what I believe is the proper spec.

Changed the spark plug and air filter.

Started on the second pull.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Questions & Answers for Filter-pre Cleaner