Easy
15-30 minutes
This is an authentic OEM part for use in Metabo angle grinders. The electronic unit goes next to the lever and the switch. During the installation process, a screwdriver might be needed to replace this part. It will need to be replaced if it becomes broken. This part is made of metal and plastic and is priced individually.
Electronic Unit 343083270
OEM part for: Metabo
Part Number: 343083270
$61.90
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 3 machines
Metabo
WEP 14-150 QuickProtect (01452000) 1400 Watt Angle Grinder View Diagrams & Manuals
WEP 14-150 QuickProtect (600290420) 1400 Watt Angle Grinder View Diagrams & Manuals
WEPBA 14-150 QuickProtect (00322420) Angle Grinder View Diagrams & Manuals
This item works with the following types of products:
- Grinder Parts
This part replaces obsolete part #: 34308163, 343081630
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Electronic Unit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Failed card
lester - July 14, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed T-25 screws.
2. Opened unit up
3. Replaced card
4. Put grinder back together
2. Opened unit up
3. Replaced card
4. Put grinder back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The air baffle was melted, the heat sensor looked burnt, the switch was sticky and replaced the electronic board and brushes for good measure
Ryan - March 27, 2016
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
This tool comes apart very easy. Take out the screws and disconnect the cord from the switch box, making note of which wires go where. There are two white and two black...white and black in from the power cord, white and black out and their locations are specific. Getting the electronic board and switch modules out isn't tricky, but its in there pretty good and you'll think if feels like it might break. Just take a close look at it and you'll the two plastic tabs you have to lift up to get it all out. Pay attention to how the rest comes apart, where the wires are run, including the heat sensor and put it back the same way. When you go to take off the gear box, you'll have to remove the safety shroud and adjustment lever, very simple, you'll have no problem with it. All of the screw heads, including the gear box should be torx. I used a T-25 I think to get them all in and out. Be patient when you're putting it back together and make sure you don't pinch any wires between the two plastic housing halves. Good luck!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
