eReplacementParts.com
877-346-4814
MTD Parts
Repair Parts Home
  
Lawn Equipment Parts
  
MTD Parts
  734-04018C Wheel-gear 8 Inte

Install
Videos!
Grid squares measure 1x1 inch
Wheel-gear 8 Inte - 734-04018C:Troy-BiltWheel-gear 8 Inte - 734-04018C:Troy-BiltWheel-gear 8 Inte - 734-04018C:Troy-BiltWheel-gear 8 Inte - 734-04018C:Troy-BiltWheel-gear 8 Inte - 734-04018C:Troy-BiltWheel-gear 8 Inte - 734-04018C:Troy-Bilt

Wheel-gear 8 Inte 734-04018C

Part Number: 734-04018C
Troy-BiltMTD
Availability: In Stock
Price: $18.38
Ships within 1 business day

*This part replaces obsolete part #: 753-08091C, 734-04018A and 734-04018B.

Product Information
Specifications
  • Size: 8-Inch
Description:
This is a genuine OEM replacement part, it is sold individually.
This is the front wheel on the models shown below.
There are two of them on each mower.
The wheel has a ring gear on the inside which is driven by the Right hand and Left hand smaller gear that attaches to the front axle on the transmission assembly.
Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Troy-Bilt
12AV566M011 (2008) Lawn Mower
12AV566M066 (2008) Lawn Mower
12AV566N011 (2007) Lawn Mower
12AV566N066 (2007) Lawn Mower
12AV566N211 (2008) Lawn Mower
12AV566N266 (2008) Lawn Mower
12AV566N711 (2005) Lawn Mower
12AV569N766 (2005) Lawn Mower
12AV569Q711 (2006) Lawn Mower
12AV569Q766 (2006) Lawn Mower
24A-071J766 (2006) Chipper Shredder Vac Parts
24A-070J766 (2007) Chipper Shredder Vac Parts
24B-070J766 (2008) Chipper
CSV070 (2005) Chipper
CSV070 (2005-2) Chipper
12A-A26M011 (2010) Push Walk-Behind Mower
TB210 (12A-A26M011) (2010) Self-Propelled Walk-Behind Mower
12A-A26M066 (2010) Self-Propelled Walk-Behind Mower
TB210 (12A-A26M066) (2010) Self-Propelled Walk-Behind Mower
12A-A26N211 (2010) Self-Propelled Walk-Behind Mower
TB210 (12A-A26N211) (2010) Self-Propelled Walk-Behind Mower
12AEA29L011 (2010) Self-Propelled Walk-Behind Mower
TB270ES (12AEA29L011) (2010) Self-Propelled Walk-Behind Mower
12AEA29L066 (2010) Self-Propelled Walk-Behind Mower
TB270ES (12AEA29L066) (2010) Self-Propelled Walk-Behind Mower
12AEA29M211 (2010) Self-Propelled Walk-Behind Mower
TB270ES (12AEA29M211) (2010) Self-Propelled Walk-Behind Mower
12AVA29Q711 (2010) Self-Propelled Walk-Behind Mower
TB250 (12AVA29Q711) (2010) Self-Propelled Walk-Behind Mower
12AVA29Q766 (2010) Self-Propelled Walk-Behind Mower
TB250 (12AVA29Q766) (2010) Self-Propelled Walk-Behind Mower
12AVB26M011 (2010) Self-Propelled Walk-Behind Mower
TB230 (12AVB26M011) (2010) Self-Propelled Walk-Behind Mower
TB230 (12AVB26M066) (2010) Self-Propelled Walk-Behind Mower
12AVB26M066 (2010) Self-Propelled Walk-Behind Mower
12AVB26N211 (2010) Self-Propelled Walk-Behind Mower
TB230 (12AVB26N211) (2010) Self-Propelled Walk-Behind Mower
12A-566N063 Tuff-Cut 210 (2003)
12BV565Q711 (2007) Self Propelled Walk Behind Mower
12A-B22Q563 Self Propelled Mower
12AF5690711 Lawn Mower
12A-566N063 (2003) Tuff-Cut 210
12A-566N766 (2003) Tuff-Cut 210
24B-070J766 (CSV070)(2009) Chipper Shredder Vac
24A-07MM066 (CSV070)(2010) Chipper Shredder Vac
MTD
Expand the 92 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chipper / Shredder
  • • Lawn Mower

Questions & Answers for Wheel-gear 8 Inte

Showing questions 1-10 of 20
< Prev Next >

LOOKING FOR FRONT DRIVE WHEELS FOR THIS MODEL NUMBER...
James for model number 12AVB2A3711 asked on 2023-04-29
Hi James, Thank you for writing. The Front Wheel for this model is listed as Part Number: 634-05039 and they are sold individually. We hope this helps!
eReplacementParts Team April 29, 2023
Will this drive wheel fit on the model number I gave you.
Nick for model number 12AV82A9704 asked on 2023-04-26
Hi Nick, Thank you for writing. The Front Drive Wheel for this model is Part Number: 634-05040. We hope this helps!
eReplacementParts Team April 26, 2023
Need front drive wheels
Michael for model number 12AGA26E011 asked on 2023-05-16
Hi Michael, Thank you for writing. The Drive Wheel for this model is listed as Part Number: 753-08087. We hope this helps!
eReplacementParts Team May 16, 2023
Part #for drive wheels
Louis for model number 12aa1bp723 asked on 2023-03-16
Hello Louis, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 634-05281A. Thank you for the inquiry, good luck with the repair!
eReplacementParts Team March 16, 2023
I don't have model no. but serial no. is 1b135k31542 if this is the right wheels I will need two of them
Robert asked on 2023-03-15
Hi Robert, Thank you for your question. Before we can provide you with information on the wheel, we will need the model number from the lawn mower. The model number can usually be found on the deck near the left rear wheel or behind the engine on the deck between where the handle bars attach to the frame. If you could resubmit your question with this information, we would be happy to help you. We look forward to hearing from you!
eReplacementParts Team March 15, 2023
Need 2 front wheels for model 12AD566N063, will these fit?
Randy for model number 12AD566N063 asked on 2023-03-07
Hello Randy, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. Good luck with your repair.
eReplacementParts Team March 07, 2023
Where can I order wheel Replacement part #63-05039
Bob for model number 12avb2a3711 asked on 2023-03-07
Hello Bob, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 634-05039. We hope this is helpful!
eReplacementParts Team March 07, 2023
Craftsman walk behind rear drive. 11" wheel does not cut low enough. Is there a 10" drive wheel that will fit?I cannot find one. Thank you
Robert asked on 2023-03-03
Hi Robert, Thank you for your question. Before we can provide you with information on the wheel, we will need the model number from your lawn mower. The model number will usually be found near the left rear wheel on the deck frame or just behind the engine on the deck frame. If you could resubmit your question with this information, we would be happy to help you. We look forward to hearing from you!
eReplacementParts Team March 03, 2023
Will this part fit my mower?
Bonnie for model number 12AGA26G011 asked on 2023-02-14
Hello Bonnie, thank you for your question. No, the part chosen is not compatible with the model given. The correct Front Wheel is 634-05039. We are pleased to have been able to help.
eReplacementParts Team February 14, 2023
Can I get replacement front wheels for my lawnmower.
Gregory for model number 12AV556O711 asked on 2022-12-12
Hello Gregory, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:734-04018C. We hope this helps, good luck with this repair!
eReplacementParts Team December 12, 2022
Showing questions 1-10 of 20
< Prev Next >
Repair Instructions: Submitted by Customers Like You
94 of 103 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Worn out wheels
Unbolt old wheels and install new wheels. Very simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
51 of 58 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Front wheels worn
Removed the hex nuts from the axles, then removed the wheels. I cleaned up the axles and lubed them. Then I put the new wheels on the axles and tightened the hex nuts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
25 of 28 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Wheels worn out
All that needs to done is to, remove the nuts that are holding the wheels on, remove the old wheels and put the new ones on and tighten the nuts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
14 of 16 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Cable-control 37.5 - 946-04674
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set
Control cable was frayed and snapped, the drive wheels were bare.
INSTRUCTIONS FOR CABLE REPAIR
1. Disconnect the cable from both the control handle and the throttle of the mower.
2. Cut one end of the connectors off to pull the cable completely out of the rubber coating.
3. Remove the old cable.
4. Snap in the cable connect towards the top of the mower by the drive handle.
5. Connect the cable to the mower end FIRST. (It makes the process much easier when connecting the cable to the control handle.
6. Connect the cable to the drive handle and the cable should be installed.

INSTRUCTIONS FOR WHEEL REPLACEMENT
1. Remove the wheel with a socket wrench (with mower on its side).
2. Remove old wheel and place new wheel on the axle.
3. Replace plastic cover on the inside of wheel to keep debris from getting into the drive gear.
4. Tighten the wheel with a socket wrench, not too tight where that it can't move, but tight enough that it will not fall off.
5. Repeat steps for the other side.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
11 of 13 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
The front drive wheels on my Troy-Bilt, self-propelled mower were worn out - too slick to assist with pulling.
Removed the nuts from the old wheels and installed new ones. Easiest repair ever and I saved a lot of money.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 7 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set, NONE
Worn tires
Simple. Just remove the nut from each shaft and remove the wheel. Place the new wheel on the shaft and tighten the nut.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 7 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Expert
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Wheels to be replace
Just removed the nuts on the shaft and removed the old wheels, Then slid the new wheels on the shafts and tightened the nuts. Thank you.
Robert S.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Gear-spur 14t Rh - 917-04801
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Power Drill, Socket set, bits for 8 sided screws
Right wheel gear was worn and wheel was wobbly due to wheel teeth worn
Took both wheels off and used a 8 sided bit on both screws that hold gears on. I used a socket that fit the bit and used this on the left gear, then I used a power drill with the other bit on the right gear to break it loose so I could replace it. Also there is a pin that goes through the shaft that fits inside the gear when you reinstall the gear. It may fallout when you remove the old gear. Make sure you put it back in when you install the new gear or the wheel will not work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 7 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Had to change old wheel's to new ones
All that needs to done is, remove the hex nut from the shaft, then remove the old wheel. Slide the new wheel on then tighten the hex nut. Done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 7 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Wheel-gear 8 Inte - 734-04018C
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Socket set, sandpaper to clean shafts
Drive wheels had no tread left, lost some of the grip
Removed nut and cleaned and lubed shaft, installed new wheels.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
137 Reviews
Click to filter by ratings:
5 stars
121
4 stars
13
3 stars
1
2 stars
2
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Why did I wait so long to replace my worn wheels?
    This was arguably the easiest repair - easier than replacing a spark plug! The bushing on one of the old wheels didn't want to come off, so I just pushed the new wheel on, and the new bushing came out. No problem, I just saved the bushing, might need it later.
    Joe - 7 days ago Verified Purchase
    Wow. What great service. The correct part and quick delivery. Wish I done it a couple of years ago
    See my not so brief title Thanks
    Guest - August 26, 2023 Verified Purchase
    Lawnmower wheels
    Ordered my new wheels for my lawn mower they were in great shape fit perfectly and came quickly. I've Ordered from here before very satisfied.
    Guest - August 25, 2023 Verified Purchase
    Parts arrived as expected.
    Parts arrived as expected and lawnmower is operational.
    Joseph - July 18, 2023 Verified Purchase
    Parts were exactly what I needed
    Easy fix
    Guest - June 25, 2023 Verified Purchase
    Worked perfect!
    These guys have everything you need, and they ship very quickly. I will enjoy their service for years to come and recommend to everyone I know.
    Michael - June 15, 2023 Verified Purchase
    Easy, fix. Runs like a new mower!
    Easy fix
    Guest - June 13, 2023 Verified Purchase
    Easy repair.
    Drive wheels were exact replacement part, arrived to my address surprisingly fast and well packaged!
    Roger - June 3, 2023 Verified Purchase
    Lawn mower drive wheels
    The replacement drive wheels were a great price and delivered fast, perfect fit and a high quality part! Great to mail order something and have it be a perfect fit with no hassles! Thank you! 🤗
    Guest - May 29, 2023 Verified Purchase
    perfect fit
    Thanks for helping me repair my mower. Grate service experience.
    william - April 15, 2023 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    • 3
    NEXT >
    Product Information
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal