866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Lawn Equipment Parts  Husqvarna Parts  532194653 Drive Control Cable

Drive Control Cable

Part Number: 532194653
HusqvarnaPoulan
Availability: 21 in stock
Price: $20.51
Quantity:
Order within the next 10 hours
and your part ships today!

*This part replaces obsolete part #: and 194653.

Description:
This replacement part is supplied directly from original equipment manufacturer for use with walk behind/push mowers. The drive control cable is the cable that stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. This cable assembly consists of a metal wire cable with z-type bent ends, rubberized cover/body and a plastic clip.

Replacing this cable is a simple task that may require pliers.

• First you want to see where the old cable is attached
• Just remove one cable end there and install the new one
• Now you can run the new cable up to the control handle
• Then just as the old cable, put the z-shaped end through the hole in the control handle
• Once both ends are attached, push the upper mount assembly of the old cable out of the hole in the upper handle
• Tie the cable in place just as the old one was (make sure to leave enough clearance and free play to avoid over-bending and breaking the new cable)
Product Information
Manufacturer: Husqvarna, Poulan
Product Number: 532194653
Classification: Part
Weight: 0.15 lbs.
Shipping: Ships Worldwide
Products Compatibility

This item works with the following types of products:

  • • Lawn Mower
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
7 of 9 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Drive Control Cable - 532194653
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Drive cable replacement
Very easy repair take bolt off front shroud pinch connecter, remove broken cable install new cable route it through the cable holder and attach it to the handle bail. No tension adjustment required. Reinstall the drive belt shroud.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Drive Control Cable - 532194653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Front wheel drive cable snapped and would not operate the front wheels.
Disconnect one end of the old cable and attached the new one, follow the cable and do the same for the other end. That is it!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Drive Control Cable - 532194653
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set
Lawn mower drive cable broke
Removed old cable, replaced with new cable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Drive Control Cable - 532194653
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
cable to operate drive broke
1.remove drive cover
2.remove broken cable
3.install new cable
4. replace drive cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Drive Control Cable - 532194653
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Self propelled don't work
Remove cover then the cable replace cable reinstall cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Drive Control Cable - 532194653
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Socket set
Cable started to fray, was hanging on by a few threads.
Removed cover from drive pulley with socket. Pushed in plastic cover tab with screwdriver. Removed old cable from the top down. Pried off old plastic retainer clip from top. Forced out old plastic retainer on bottom with needle nose pliers. Installed new cable from the bottom up. Pushed in new plastic retainers on bottom and top.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Drive Control Cable - 532194653
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
Drive cable
Note how the old cable is attached and where it is attached. Then install the new cable as you remove the old one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Lawn Mower
Parts Used:
Pan Head Tapping Screw #10-24x2-3/4 - 532175262
Drive Control Cable - 532194653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
Broken cable.
Easy repair, just reverse the removal steps, does require a new tie wrap for the cable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Lawn Mower
Parts Used:
Drive Control Cable - 532194653
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Self propel control cable rusted out
Removed old cable housing, pliers necessary to remove lower end.
New cable assembly snapped right in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Drive Control Cable - ( 532194653 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
5
Average Rating (out of 5):
3 Reviews
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Easy install
    Got the replacement part fast and install was a breeze!
    Guest - 14 days ago Verified Purchase
    Easy Change out
    The new cable replaced one that had worn and actually stretched just a little bit. The new cable installed easily and quickly. If you do this, it helps if you can release some of the tension on the old cable before removing it. I did this on my mower by folding the large handle, which was able to be folded over for compact storage.
    Guest - 15 days ago Verified Purchase
    mower cable
    Easy repair ,cable worked perfect
    Guest - 23 days ago Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    visa mastercard discover american express PayPal
    HACKER SAFE certified sites prevent over 99.9% of hacker crime.

    fancyboxy