*This part replaces obsolete part #: 746-04265A.
|This replacement drive cable is supplied from the original equipment manufacturer. It is commonly utilized on Troy-Bilt and Yard Man walk-behind lawn mowers. The purpose of a drive cable is to stop the engine when the user lets go of the handle. When the cable is damaged or broken, the mower becomes temporarily inoperable so the cable needs to be replaced. Please note one durable rubber insulated drive cable is included. Replacing this part is a pretty simple task that should only require a screwdriver and pliers.|
This part is compatible with the following machines:
12AG836E066 (2007) Lawn Mower
12AG836E711 (2006) Lawn Mower
12AG836E766 (2006) Lawn Mower
12AG836G211 (2007) Lawn Mower
12AG836G266 (2007) Lawn Mower
12AV834Q711 (2006) Lawn Mower
12AV834Q766 (2006) Lawn Mower
12AV835Q711 (2007) Lawn Mower
12AV835Q766 (2007) Lawn Mower
12BV835Q711 (2007) Self-Propelled Walk-Behind Mower
12AV839R090 (12AV839R090 W839R)(2007) Lawn Mower
12AV839S290 (2007) Lawn Mower
Removed and installed new cable
Remove belt guard
Cut zip ties securing cable to handle
Remove broken drive cable
Install new drive cable (adjustment is at handle end)
Reassemble drive handle after inserting cable
Secure cable to handle with new zip ties
Reinstall belt guard with three bolts
Start engine verifying operation of drive and check drive cable for proper adjustment
Removed cable from handle
Replaced with new cable
2. Unscrewed the cable from the handle assembly.
3. Pulled the cable out of the drive box.
4. Removed the ole cable.
5. Installed the new cable by reversing the procedure.
6. Put the covers and blade back on the mower.